Hefei Purple Horn E-Commerce Co., Ltd.
| Description | SOP23-FP Power Driver Modules RoHS |
| Mfr. Part # | SPE10M25T-C |
| Package | SOP23-FP |
| Model Number | SPE10M25T-C |
View Detail Information
Explore similar products
3 phase inverter module AOS AIP5D05K060Q4S with integrated HVIC drivers and
IPM Module AOS AIP5D15K060Q4 with Trench Shielded Planar Gate IGBT and Multiple
600 volt 10 amp 3 phase inverter module AOS AIP3D10A060Q6N for compressors
motor drive module AOS AIP3D05A060Q4N featuring 600 volt 5 amp trench shielded
Product Specification
| Description | SOP23-FP Power Driver Modules RoHS | Mfr. Part # | SPE10M25T-C |
| Package | SOP23-FP | Model Number | SPE10M25T-C |
The SPE10M25T-C is an Intelligent Power Module (IPM) designed for high-efficiency power conversion in various applications. It features integrated protection functions and a high-level valid signal compatible with 3.3V and 5V MCUs. The module offers a lower arm MOSFET source output, built-in bootstrap diode, anti-shoot-through protection, undervoltage protection, and internal temperature detection output. It boasts an isolation voltage of 1500V.
Order Number: SPE10M25T-C
Marking: SPE10M25T-C
Package: SOP23-FP
Main Characteristics: 500V/5A 3 Phase Full Bridge Drive
VDSS: 250V
ID: 5A
IDM: 10A
VISO: 1500V
| Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|---|
| Absolute Maximum Ratings | ||||||
| Drain-Source Voltage of Each MOSFET | VDSS | / | - | - | 250 | V |
| Each MOSFET Current, Continuous | ID | Tc=25 | - | - | 5 | A |
| Each MOSFET Pulse Current, Peak | IDM | Tc=25, pulse width < 100us | - | - | 10 | A |
| Maximum Power Dissipation (For Each MOSFET) | PD | Tc=25 | - | - | 12 | W |
| Control Supply Voltage (VCC-COM) | VCC | Applied between VCC and COM | - | - | 20 | V |
| High-side Bias Voltage (VB-VS) | VBS | Applied between VB and VS | - | - | 20 | V |
| Input Signal Voltage (VIN-COM) | VIN | Applied between VIN and COM | -0.3 | - | VCC+0.3 | V |
| Bootstrap Diode Reverse Breakdown Voltage | VRRMB | / | - | - | 500 | V |
| Bootstrap Diode Forward Current | IFB | TC=25 | - | - | 0.5 | A |
| Bootstrap Diode Forward Current, Peak | IFPB | TC=25, pulse width < 1mS | - | - | 1 | A |
| Operating Junction Temperature | Tj | / | -40 | - | 150 | |
| Storage Temperature | TSTG | / | -40 | - | 125 | |
| Isolation Voltage | VISO | 60Hz, sinusoidal, AC 1 min, between pins and heat-sink plate | - | - | 1500 | V |
| Thermal Resistance | ||||||
| Junction to Case Thermal Resistance (For Each MOSFET) | Rth(j-c) | / | - | 10.5 | - | /W |
| Electrical Characteristics | ||||||
| Drain-Source Breakdown Voltage | BVDSS | VIN=0V, ID=1mA | 250 | - | - | V |
| Zero Gate Voltage Drain Current | IDSS | VIN=0V, VDS=250V | - | - | 1 | mA |
| Drain-Source Diode Forward Voltage | VSD | VCC=VBS=15V, VIN=0V, ID=-5A | - | 1.1 | - | V |
| Drain-Source Turn-On Resistance | RDS(on) | VCC=VBS=15V, VIN=5V, ID=5A | - | - | 0.5 | ohm |
| Switching Time ON | tON | VPN=150V, VCC=VBS=15V, ID=2.4A, VIN=0/5V, Inductive Load L=3mH | - | 650 | - | nS |
| Switching Time OFF | tOFF | VPN=150V, VCC=VBS=15V, ID=2.4A, VIN=0/5V, Inductive Load L=3mH | - | 590 | - | nS |
| VCC Quiescent Supply Current | IQCC | VCC=15V, VIN=5V | - | - | 600 | uA |
| VBS Quiescent Supply Current | IQB | VDB=15V, VIN=5V | - | - | 210 | uA |
| Low-Side Under-Voltage Protection Detection Level | UVCCD | VCC-COM | 7.2 | 8 | 9.4 | V |
| High-Side Under-Voltage Protection Detection Level | UVBSD | VBS | 7.2 | 8 | 9.4 | V |
| HVIC Temperature Sensing Voltage Output | VTS | VCC=15V, THVIC=25 | 0.6 | 0.85 | 1.1 | V |
| Input ON Threshold Voltage | VIH | Logic HIGH Level, Applied between VIN and COM | - | - | 2.9 | V |
| Input OFF Threshold Voltage | VIL | Logic Low Level, Applied between VIN and COM | 0.8 | - | - | V |
| BSD Forward voltage | VF(BSD) | IF=0.1A, TC=25 | - | 4.5 | 8 | V |
| Recommended Operating Conditions | ||||||
| Supply Voltage | VPN | Applied between P and N | - | 150 | 200 | V |
| Control Supply Voltage | VCC | VCC-COM | 13.5 | 15.0 | 16.5 | V |
| High-Side Bias Voltage | VBS | VB-VS | 13.5 | 15.0 | 16.5 | V |
| Input ON Threshold Voltage | VIN(ON) | Applied between VIN and COM | 3.0 | - | VCC | V |
| Input OFF Threshold Voltage | VIN(OFF) | Applied between VIN and COM | 0 | - | 0.6 | V |
| Blanking Time for Preventing Arm-Short | tdead | VCC=VBS=13.5~16.5V, Tj150 | 1.0 | - | - | us |
| PWM Switching Frequency | FPWM | Tj150 | - | 15 | - | KHz |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
.gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c... .gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c...
Get in touch with us
Leave a Message, we will call you back quickly!