| Voltage - Isolation | 1500Vrms |
| Description | Power Driver Modules RoHS |
| Mfr. Part # | FSB50325T |
| Model Number | FSB50325T |
View Detail Information
Explore similar products
3 phase inverter module AOS AIP5D05K060Q4S with integrated HVIC drivers and
IPM Module AOS AIP5D15K060Q4 with Trench Shielded Planar Gate IGBT and Multiple
600 volt 10 amp 3 phase inverter module AOS AIP3D10A060Q6N for compressors
motor drive module AOS AIP3D05A060Q4N featuring 600 volt 5 amp trench shielded
Product Specification
| Voltage - Isolation | 1500Vrms | Description | Power Driver Modules RoHS |
| Mfr. Part # | FSB50325T | Model Number | FSB50325T |
The FSB50325T is an advanced Motion SPM 5 module designed as a high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. It integrates optimized gate drivers utilizing FRFET technology to minimize EMI and losses. The module features a built-in High-Voltage Integrated Circuit (HVIC) that simplifies power supply requirements and translates logic-level gate inputs to the necessary high-voltage drive signals. Separate open-source terminals for each phase facilitate diverse control algorithms and enable three-phase current sensing. This RoHS-compliant module is UL certified and optimized for low electromagnetic interference.
| Parameter | Conditions | Min | Typ | Max | Unit |
| Inverter Part (each MOSFET) | |||||
| Drain-Source Voltage (VDSS) | Each MOSFET | - | - | 250 | V |
| Drain Current, Continuous (ID) | TC = 25C | - | - | 1.5 | A |
| Drain Current, Continuous (ID) | TC = 80C | - | - | 1.0 | A |
| Drain Current, Peak (IDP) | TC = 25C, PW < 100 s | - | - | 3.0 | A |
| Maximum Power Dissipation (PD) | TC = 25C, For Each MOSFET | - | - | 10 | W |
| Static Drain-Source Turn-On Resistance (RDS(on)) | VCC = VBS = 15 V, VIN = 5 V, ID = 1.0 A | - | 1.4 | 1.8 | |
| Drain-Source Diode Forward Voltage (VSD) | VCC = VBS = 15V, VIN = 0 V, ID = -1.0 A | - | - | 1.2 | V |
| Switching Times (tON) | VPN = 150 V, VCC = VBS = 15 V, ID = 1.0 A, Inductive Load L = 3 mH | - | 1076 | - | ns |
| Switching Times (tOFF) | VPN = 150 V, VCC = VBS = 15 V, ID = 1.0 A, Inductive Load L = 3 mH | - | 660 | - | ns |
| Switching Times (trr) | VPN = 150 V, VCC = VBS = 15 V, ID = 1.0 A, Inductive Load L = 3 mH | - | 108 | - | ns |
| Energy ON (EON) | VPN = 150 V, VCC = VBS = 15 V, ID = 1.0 A, Inductive Load L = 3 mH | - | 47 | - | J |
| Energy OFF (EOFF) | VPN = 150 V, VCC = VBS = 15 V, ID = 1.0 A, Inductive Load L = 3 mH | - | 3.1 | - | J |
| Drain - Source Breakdown Voltage (BVDSS) | VIN = 0 V, ID = 250 A | 250 | - | - | V |
| Zero Gate Voltage Drain Current (IDSS) | VIN = 0 V, VDS = 250V | - | - | 250 | A |
| Control Part (each HVIC) | |||||
| Control Supply Voltage (VCC) | Applied Between VCC and COM | - | 15.0 | - | V |
| High-side Bias Voltage (VBS) | Applied Between VB and VS | - | 15.0 | - | V |
| Input Signal Voltage (VIN) | Applied Between IN and COM | -0.3 | - | VCC + 0.3 | V |
| Quiescent VCC Current (IQCC) | VCC = 15 V, VIN = 0 V Applied Between VCC and COM | - | - | 160 | A |
| Quiescent VBS Current (IQBS) | VBS = 15 V, VIN = 0 V Applied Between VB(U) - U, VB(V) - V, VB(W) - W | - | - | 100 | A |
| Low-Side Under-Voltage Protection (UVCCD) | Detection Level | 7.4 | 8.0 | 9.4 | V |
| Low-Side Under-Voltage Protection (UVCCR) | Reset Level | 8.0 | 8.9 | 9.8 | V |
| High-Side Under-Voltage Protection (UVBSD) | Detection Level | 7.4 | 8.0 | 9.4 | V |
| High-Side Under-Voltage Protection (UVBSR) | Reset Level | 8.0 | 8.9 | 9.8 | V |
| ON Threshold Voltage (VIH) | Logic HIGH Level Applied between IN and COM | 2.9 | - | - | V |
| OFF Threshold Voltage (VIL) | Logic LOW Level | - | - | 0.8 | V |
| Input Bias Current (IIH) | VIN = 5 V Applied between IN and COM | - | 10 | 20 | A |
| Input Bias Current (IIL) | VIN = 0 V | - | - | 2 | A |
| Thermal Resistance | |||||
| Junction to Case Thermal Resistance (RJC) | Each MOSFET under Inverter Operating Condition | - | - | 10.2 | C/W |
| Absolute Maximum Ratings | |||||
| Operating Junction Temperature (TJ) | - | -20 | - | 150 | C |
| Storage Temperature (TSTG) | - | -50 | - | 150 | C |
| Isolation Voltage (VISO) | 60 Hz, Sinusoidal, 1 Minute, Connect Pins to Heat Sink Plate | - | - | 1500 | Vrms |
| Recommended Operating Conditions | |||||
| Supply Voltage (VPN) | Applied Between P and N | - | 150 | 200 | V |
| Control Supply Voltage (VCC) | Applied Between VCC and COM | 13.5 | 15.0 | 16.5 | V |
| High-Side Bias Voltage (VBS) | Applied Between VB and VS | 13.5 | 15.0 | 16.5 | V |
| Input ON Threshold Voltage (VIN(ON)) | Applied Between IN and COM | 3.0 | - | VCC | V |
| Input OFF Threshold Voltage (VIN(OFF)) | Applied Between IN and COM | 0 | - | 0.6 | V |
| Blanking Time (td) | VCC = VBS = 13.5 ~ 16.5 V, TJ 150C | 1.0 | - | - | s |
| PWM Switching Frequency (fPWM) | TJ 150C | - | 15 | - | kHz |
| Case Temperature (TC) | TJ 150C | -20 | - | 125 | C |
3-Phase Inverter Driver for Small Power AC Motor Drives
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification:
Verified Supplier
.gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c... .gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c...
Get in touch with us
Leave a Message, we will call you back quickly!