| Description | Power Driver Modules RoHS |
| Mfr. Part # | NFAL7565L4BT |
| Model Number | NFAL7565L4BT |
View Detail Information
Explore similar products
3 phase inverter module AOS AIP5D05K060Q4S with integrated HVIC drivers and
IPM Module AOS AIP5D15K060Q4 with Trench Shielded Planar Gate IGBT and Multiple
600 volt 10 amp 3 phase inverter module AOS AIP3D10A060Q6N for compressors
motor drive module AOS AIP3D05A060Q4N featuring 600 volt 5 amp trench shielded
Product Specification
| Description | Power Driver Modules RoHS | Mfr. Part # | NFAL7565L4BT |
| Model Number | NFAL7565L4BT |
The NFAL7565L4BT is a 650 V, 75 A, 3-phase IGBT inverter Smart Power Module (SPM) designed for AC induction, BLDC, and PMSM motors. It integrates optimized gate drive for IGBTs to reduce EMI and losses, along with comprehensive on-module protection features including under-voltage lockouts, over-current shutdown, temperature sensing, and fault reporting. The module utilizes a high-speed HVIC requiring a single supply voltage and provides separate negative IGBT terminals for flexible control algorithm implementation. Its Al2O3 DBC substrate ensures very low thermal resistance.
| Parameter | Conditions | Min | Typ | Max | Unit |
| INVERTER PART | |||||
| Supply Voltage (VPN) | Applied between P NU, NV, NW | 450 | V | ||
| Supply Voltage (VPN surge) | Applied between P NU, NV, NW | 550 | V | ||
| Collector-Emitter Voltage (Vces) | 650 | V | |||
| Collector Current (Ic) | Each IGBT, Tc = 25C, Tj 150C | 75 | A | ||
| Collector Current (Peak) (Icp) | Each IGBT, Tc = 25C, Tj 150C, Under 1 ms Pulse Width | 150 | A | ||
| Collector Dissipation (Pc) | Tc = 25C per One Chip | 223 | W | ||
| Operating Junction Temperature (Tj) | -40 | 150 | C | ||
| Junction-to-Case Thermal Resistance (Rth(j-c)Q) | Inverter IGBT Part (per 1/6 module) | 0.56 | C/W | ||
| Junction-to-Case Thermal Resistance (Rth(j-c)F) | Inverter FWDi Part (per 1/6 module) | 0.84 | C/W | ||
| Collector-Emitter Saturation Voltage (VCE(sat)) | VDD = VBS = 15 V, IN = 5 A, Ic = 75 A, Tj = 25C | 1.55 | 2.05 | V | |
| FWDi Forward Voltage (VF) | IN = 0 A, Ic = -75 A, Tj = 25C | 2.05 | 2.55 | V | |
| CONTROL PART | |||||
| Control Supply Voltage (VDD) | Applied between VDD(H), VDD(L) VSS | 20 | V | ||
| High-Side Control Bias Voltage (VBS) | Applied between VB(U) VS(U), VB(V) VS(V), VB(W) VS(W) | 20 | V | ||
| Input Signal Voltage (VIN) | Applied between HIN(U), HIN(V), HIN(W), LIN(U), LIN(V), LIN(W) VSS | -0.5 | VDD+0.5 | V | |
| Fault Output Supply Voltage (VFO) | Applied between VFO VSS | -0.5 | VDD+0.5 | V | |
| Fault Output Current (IFO) | Sink Current at VFO pin | 5 | mA | ||
| Current Sensing Input Voltage (VCIN) | Applied between CIN VSS | -0.5 | VDD+0.5 | V | |
| Operating Junction Temperature (Tj) | -40 | 150 | C | ||
| Quiescent VDD Supply Current (IQDDH) | VDD(UH,VH,WH) = 15 V, HIN(U,V,W) = 0 V | 0.30 | mA | ||
| Quiescent VDD Supply Current (IQDDL) | VDD(L) = 15 V, LIN(U,V,W) = 0 V | 3.50 | mA | ||
| Operating VDD Supply Current (IPDDH) | VDD(UH,VH,WH) = 15 V, FPWM = 20 kHz, Duty = 50%, Applied to one PWM Signal Input for High-Side | 0.40 | mA | ||
| Operating VDD Supply Current (IPDDL) | VDD(L) = 15 V, FPWM = 20 kHz, Duty = 50%, Applied to one PWM Signal Input for Low-Side | 7.00 | mA | ||
| Quiescent VBS Supply Current (IQBS) | VDD = VBS = 15 V, HIN(U,V,W) = 0 V | 0.30 | mA | ||
| Operating VBS Supply Current (IPBS) | VDD = VBS = 15 V, FPWM = 20 kHz, Duty = 50%, Applied to one PWM Signal Input for High-Side | 6.00 | mA | ||
| Short Circuit Trip Level (VSC(ref)) | VDD = 15 V, CIN VSS(L) | 0.46 | 0.48 | 0.50 | V |
| BOOSTSTRAP DIODE PART | |||||
| Maximum Repetitive Reverse Voltage (VRRM) | 650 | V | |||
| Operating Junction Temperature (Tj) | -40 | 150 | C | ||
| TOTAL SYSTEM | |||||
| Self-Protection Supply Voltage Limit (VPN(PROT)) | Short-Circuit Protection Capability, VDD = VBS = 13.5~16.5 V, Tj = 150C, Vces < 650 V, Non-Repetitive, < 2 s | 400 | V | ||
| Module Case Operation Temperature (Tc) | -40 | 125 | C | ||
| Storage Temperature (Tstg) | -40 | 125 | C | ||
| Isolation Voltage (Viso) | 60 Hz, Sinusoidal, AC 1 Minute, Connection Pins to Heat Sink Plate | 2500 | Vrms | ||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification:
Verified Supplier
.gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c... .gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c...
Get in touch with us
Leave a Message, we will call you back quickly!