Hefei Purple Horn E-Commerce Co., Ltd.
| Description | Power Driver Modules RoHS |
| Mfr. Part # | AIP5D05K060Q4 |
| Model Number | AIP5D05K060Q4 |
View Detail Information
Explore similar products
3 phase inverter module AOS AIP5D05K060Q4S with integrated HVIC drivers and
IPM Module AOS AIP5D15K060Q4 with Trench Shielded Planar Gate IGBT and Multiple
600 volt 10 amp 3 phase inverter module AOS AIP3D10A060Q6N for compressors
motor drive module AOS AIP3D05A060Q4N featuring 600 volt 5 amp trench shielded
Product Specification
| Description | Power Driver Modules RoHS | Mfr. Part # | AIP5D05K060Q4 |
| Model Number | AIP5D05K060Q4 |
The AIP5D05K060Q4 / AIP5D05K060Q4S is a Dual-In-Line Package Intelligent Power Module (IPM) designed for 600V-5A applications. It features a 3-phase inverter module with integrated HVIC drivers, built-in bootstrap diodes with current-limiting resistors, and comprehensive protection features including control supply under-voltage lockout (UVLO), over-temperature (OT) protection with temperature monitoring (VOT), and short-circuit current protection (CSC). The module offers a wide input interface (3-18V) with Schmitt trigger receiver circuits and isolation ratings of 2000Vrms. It is suitable for low-power motor drives in AC 100-240Vrms class applications such as washing machines, compressors, fan motors, refrigerators, and dishwashers.
| Model | External View Size (mm) | Voltage Rating | Current Rating | Temperature Range (C) | Description |
|---|---|---|---|---|---|
| AIP5D05K060Q4 | 33.4 x 15 x 3.6 | 600V | 5A | -40 to 150 | IPM-5 Normal |
| AIP5D05K060Q4S | 33.4 x 15 x 3.6 | 600V | 5A | -40 to 150 | IPM-5A Short |
| Parameter | Conditions | Rating | Unit |
|---|---|---|---|
| Supply Voltage (VPN) | Applied between P - NU,NV,NW | 450 | V |
| Supply Voltage (VPN-surge) | Applied between P - NU,NV,NW | 500 | V |
| Collector-Emitter Voltage (VCES) | 600 | V | |
| Output Phase Current (IC) | TC=25C, TJ<150C | 5 | A |
| Output Phase Current (IC) | TC=100C, TJ<150C | 3 | A |
| Output Peak Phase Current (IPK) | TC=25C, less than 1ms pulse width | 10 | A |
| Short Circuit Withstand Time (tSC) | VPN400V, TJ=150C, VDD=15V | 5 | s |
| Collector Dissipation (PC) | TC=25C, per chip | 18.9 | W |
| Operating Junction Temperature (TJ) | -40 to 150 | C | |
| Control Supply Voltage (VDD) | Applied between VDD-COM | 25 | V |
| High-Side Control Bias Voltage (VDB) | Applied between VB(U)-U, VB(V)-V, VB(W)-W | 25 | V |
| Input Voltage (VIN) | Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL), IN(WL) COM | VDD0.5 | V |
| Fault Output Supply Voltage (VCF) | Applied between VCF-COM | 50.5 | V |
| Fault Output Current (ICF) | Sink current at VCF terminal | 1 | mA |
| Current Sensing Input Voltage (VSC) | Applied between CSC-COM | 50.5 | V |
| Temperature Output (VOT) | Applied between VOT-COM | 50.5 | V |
| Self Protection Supply Voltage Limit (VPN(PROT)) | VDD=13.5-16.5V, Inverter part TJ=150C, Non-repetitive, less than 2s | 400 | V |
| Module Case Operation Temperature (TC) | -30 to 125 | C | |
| Storage Temperature (TSTG) | -40 to 150 | C | |
| Isolation Voltage (VISO) | 60Hz, sinusoidal, AC 1min, between connected all pins and heat sink plate | 2000 | Vrms |
| Junction to Case Thermal Resistance (Rth(j-c)Q) | Inverter IGBT (per 1/6 module) | 6.6 | K/W |
| Junction to Case Thermal Resistance (Rth(j-c)F) | Inverter FWD (per 1/6 module) | 8.5 | K/W |
| Collector-Emitter Saturation Voltage (VCE(SAT)) | VDD=VDB=15V, VIN=5V, IC=2.5A, TJ=25C | 1.48 - 1.85 | V |
| Collector-Emitter Saturation Voltage (VCE(SAT)) | VDD=VDB=15V, VIN=5V, IC=2.5A, TJ=125C | 1.69 | V |
| FWD Forward Voltage (VF) | VIN=0, IF=2.5A, TJ=25C | 1.75 - 2.15 | V |
| Switching Times (tON) | VPN=300V, VDD=VDB=15V, IC=2.5A, TJ=25C, VIN=0V 5V Inductive load (high-side) | 0.40 - 0.70 | s |
| Switching Times (tC(ON)) | 0.10 - 0.40 | s | |
| Switching Times (tOFF) | 0.85 - 1.45 | s | |
| Switching Times (tC(OFF)) | 0.12 - 0.30 | s | |
| Switching Times (trr) | 0.12 | s | |
| Collector-Emitter Leakage Current (ICES) | VCE=VCES, TJ=25C | 1 | mA |
| Collector-Emitter Leakage Current (ICES) | VCE=VCES, TJ=125C | 10 | mA |
| Quiescent VDD Supply Current (IQDD) | VDD=15V, IN(UH,VH,WH,UL,VL,WL) =0V | 2.1 | mA |
| Quiescent VDB Supply Current (IQDB) | VDB=15V, IN(UH, VH, WH)=0V | 0.3 | mA |
| Short-Circuit Trip Level (VSC(ref)) | VDD=15V | 0.45 - 0.51 | V |
| Under-Voltage Protection Trip Level (UVDT) | 10.3 - 12.5 | V | |
| Under-Voltage Reset Level (UVDR) | 10.8 - 13.0 | V | |
| Under-Voltage Protection Trip Level (UVDBT) | 8.5 - 10.5 | V | |
| Under-Voltage Reset Level (UVDBR) | 9.5 - 11.5 | V | |
| Temperature Output (VOT) | R=10k, LVIC Temperature=80C | 2.36 - 2.55 | V |
| Temperature Output (VOT) | R=10k, LVIC Temperature=25C | 0.77 - 1.25 | V |
| Over-Temperature Protection (OTT) | VDD=15V, Detect LVIC Temperature Trip Level | 110 - 150 | C |
| Hysteresis of Trip Reset (OTHYS) | 30 | C | |
| Fault Output Voltage (VCFH) | VSC=0V, VCF Circuit: 10k to 5V pull-up | 4.9 | V |
| Fault Output Voltage (VCFL) | VSC=1V, VCF Circuit: 10k to 5V pull-up | 0.5 | V |
| CF positive going threshold (VCF+) | 1.9 - 2.2 | V | |
| CF negative going threshold (VCF-) | 0.8 - 1.1 | V | |
| Fault Output Pulse Width (tFO) | 20 | s | |
| Input Current (IIN) | VIN=5V | 1.0 | mA |
| ON Threshold Voltage (Vth(on)) | Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL), IN(WL)-COM | 2.3 - 2.6 | V |
| OFF Threshold Voltage (Vth(off)) | 0.8 - 1.2 | V | |
| ON/OFF Threshold Hysteresis Voltage (Vth(hys)) | 1.1 | V | |
| Bootstrap Diode Forward Voltage (VF(BSD)) | IF=10mA Including Voltage Drop by Limiting Resistor | 0.5 - 1.5 | V |
| Built-in Limiting Resistance (RBSD) | Included in Bootstrap Diode | 80 - 120 | |
| Supply Voltage (VPN) | Recommended Operation Conditions | 0 - 300 | V |
| Control Supply Voltage (VDD) | Recommended Operation Conditions | 13.5 - 16.5 | V |
| High-Side Bias Voltage (VDB) | Recommended Operation Conditions | 13.5 - 18.5 | V |
| Control Supply Variation (dVDD/dt, dVDB/dt) | Recommended Operation Conditions | -1 - 1 | V/s |
| Arm Shoot-Through Blocking Time (tdead) | For each input signal | 1.0 | s |
| PWM Input Frequency (fPWM) | -40C < TJ < 150C | 20 | kHz |
| Minimum Input Pulse Width (PWIN(ON)) | 0.5 | - | |
| Minimum Input Pulse Width (PWIN(OFF)) | 0.5 | - | |
| COM Variation | Between COM-NU, NV, NW (including surge) | -5.0 - 5.0 | V |
| Mounting Torque | Mounting Screw: M3 | 0.59 - 0.78 | N m |
| Weight | 5.25 | g | |
| Flatness | Refer to Figure 6 | -50 - 100 | m |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
.gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c... .gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c...
Get in touch with us
Leave a Message, we will call you back quickly!