Hefei Purple Horn E-Commerce Co., Ltd.
| Description | Power Driver Modules RoHS |
| Mfr. Part # | AIP5D10K060Q1 |
| Model Number | AIP5D10K060Q1 |
View Detail Information
Explore similar products
3 phase inverter module AOS AIP5D05K060Q4S with integrated HVIC drivers and
IPM Module AOS AIP5D15K060Q4 with Trench Shielded Planar Gate IGBT and Multiple
600 volt 10 amp 3 phase inverter module AOS AIP3D10A060Q6N for compressors
motor drive module AOS AIP3D05A060Q4N featuring 600 volt 5 amp trench shielded
Product Specification
| Description | Power Driver Modules RoHS | Mfr. Part # | AIP5D10K060Q1 |
| Model Number | AIP5D10K060Q1 |
Product Overview
The AIP5D10K060Q1 and AIP5D10K060Q1S are intelligent power modules (IPM) designed for 3-phase inverter applications. These modules integrate Trench Shielded Planar Gate IGBTs with HVIC drivers, bootstrap diodes featuring integrated current-limiting resistors, and comprehensive protection features including control supply under-voltage lockout (UVLO), over-temperature (OT) protection, and short-circuit current protection (CSC). They offer a wide input interface with Schmitt trigger receiver circuits and isolation ratings of 2000Vrms. Ideal for low-power motor drives in applications such as refrigerators, dishwashers, fan motors, washing machines, and air conditioners, these modules provide robust and reliable performance.
| Parameter | Conditions | Min. | Typ. | Max. | Units |
|---|---|---|---|---|---|
| General | |||||
| External View Size | 33.4 x 15 x 3.6 | mm | |||
| Part Number | Temperature Range | Package | Pin Length | Description | |
| AIP5D10K060Q1 | -40C to 150C | IPM-5 | Normal | ||
| AIP5D10K060Q1S | -40C to 150C | IPM-5A | Short | ||
| Inverter Ratings | |||||
| Supply Voltage (VPN) | Applied between P - NU,NV,NW | 0 | 300 | 400 | V |
| Supply Voltage (VPN) | Applied between P - NU,NV,NW | 450 | V | ||
| Supply Voltage (VPN-surge) | Applied between P - NU,NV,NW | 500 | V | ||
| Collector-Emitter Voltage (VCES) | 600 | V | |||
| Output Phase Current (IC) | TC=25C, TJ<150C | 10 | A | ||
| Output Phase Current (IC) | TC=100C, TJ<150C | 5 | A | ||
| Output Peak Phase Current (IPK) | TC=25C, less than 1ms pulse width | 20 | A | ||
| Short Circuit Withstand Time (tSC) | VPN400V, TJ=150C, VD=15V | 5 | s | ||
| Collector Dissipation (PC) | TC=25C, per chip | 23 | W | ||
| Operating Junction Temperature (TJ) | -40 | 150 | C | ||
| Control (Protection) Ratings | |||||
| Control Supply Voltage (VDD) | Applied between VDD-COM | 25 | V | ||
| High-Side Control Bias Voltage (VDB) | Applied between VB(U)-U, VB(V)-V, VB(W)-W | 25 | V | ||
| Input Voltage (VIN) | Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL), IN(WL) COM | VDD-0.5 | VDD+0.5 | V | |
| Fault Output Supply Voltage (VFO) | Applied between VFO-COM | 5 | 5.5 | V | |
| Fault Output Current (IFO) | Sink current at VFO terminal | 1 | mA | ||
| Current Sensing Input Voltage (VSC) | Applied between CSC-COM | 5 | 5.5 | V | |
| Temperature Output (VOT) | Applied between VOT-COM | 5 | 5.5 | V | |
| Total System Ratings | |||||
| Self Protection Supply Voltage Limit (VPN(PROT)) | VDD=13.5-16.5V, Inverter part TJ=150C, Non-repetitive, less than 2s | 400 | V | ||
| Module Case Operation Temperature (TC) | Measurement point of TC is provided in Figure 1 | -30 | 125 | C | |
| Storage Temperature (TSTG) | -40 | 150 | C | ||
| Isolation Voltage (VISO) | 60Hz, sinusoidal, AC 1min, between connected all pins and heat sink plate | 2000 | Vrms | ||
| Thermal Resistance | |||||
| Junction to Case (Rth(j-c)Q) | Inverter IGBT (per 1/6 module) | - | - | 5.4 | K/W |
| Junction to Case (Rth(j-c)F) | Inverter FWD (per 1/6 module) | - | - | 6.9 | K/W |
| Electrical Characteristics | |||||
| Collector-Emitter Saturation Voltage (VCE(SAT)) | VDD=VDB=15V, VIN=5V, IC=5A, TJ=25C | - | 1.60 | 2.00 | V |
| Collector-Emitter Saturation Voltage (VCE(SAT)) | VDD=VDB=15V, VIN=5V, IC=5A, TJ=125C | - | 1.90 | - | V |
| FWD Forward Voltage (VF) | VIN=0, IF=5A, TJ=25C | - | 1.36 | 1.80 | V |
| Switching Times (tON) | VPN=300V, VDD=VDB=15V, IC=5A, TJ=25C, VIN=0V 5V Inductive load (high-side) | 0.30 | 0.60 | 1.10 | s |
| Switching Times (tC(ON)) | 0.10 | 0.20 | s | ||
| Switching Times (tOFF) | 1.00 | 1.50 | s | ||
| Switching Times (tC(OFF)) | 0.20 | 0.40 | s | ||
| Switching Times (trr) | 0.30 | - | - | s | |
| Collector-Emitter Leakage Current (ICES) | VCE=VCES, TJ=25C | - | - | 1 | mA |
| Collector-Emitter Leakage Current (ICES) | VCE=VCES, TJ=125C | - | - | 10 | mA |
| Quiescent VDD Supply Current (IQDD) | VDD=15V, IN(UH,VH,WH,UL,VL,WL) =0V | - | - | 2.1 | mA |
| Quiescent VDB Supply Current (IQDB) | VDB=15V, IN(UH, VH, WH)=0V | - | - | 0.3 | mA |
| Short-Circuit Trip Level (VSC(ref)) | VDD=15V | 0.45 | 0.48 | 0.51 | V |
| Under-Voltage Protection Trip Level (UVDT) | 10.3 | 11.4 | 12.5 | V | |
| Under-Voltage Reset Level (UVDR) | 10.8 | 11.9 | 13.0 | V | |
| Under-Voltage Protection Trip Level (UVDBT) | 8.5 | 9.5 | 10.5 | V | |
| Under-Voltage Reset Level (UVDBR) | 9.5 | 10.5 | 11.5 | V | |
| Temperature Output (VOT) | LVIC Temperature=80C, R=10k | 2.36 | 2.45 | 2.55 | V |
| Temperature Output (VOT) | LVIC Temperature=25C, R=10k | 0.77 | 1.00 | 1.25 | V |
| Over-Temperature Protection (OTT) | Detect LVIC Temperature Trip Level | 110 | 130 | 150 | C |
| Hysteresis of Trip Reset (OTHYS) | - | 30 | - | C | |
| Fault Output Voltage (VFOH) | VSC=0V, VFO Circuit: 10k to 5V pull-up | 4.9 | - | - | V |
| Fault Output Voltage (VFOL) | VSC=1V, VFO Circuit: 10k to 5V pull-up | - | - | 0.5 | V |
| Fault Output Pulse Width (tFO) | 20 | - | - | s | |
| Input Current (IIN) | VIN=5V | - | 1.0 | - | mA |
| ON Threshold Voltage (Vth(on)) | Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL), IN(WL)-COM | 2.3 | 2.6 | - | V |
| OFF Threshold Voltage (Vth(off)) | 0.8 | 1.2 | - | V | |
| ON/OFF Threshold Hysteresis Voltage (Vth(hys)) | - | 1.1 | - | V | |
| Bootstrap Diode Forward Voltage (VF(BSD)) | IF=10mA Including Voltage Drop by Limiting Resistor | 1.0 | 1.5 | 2.0 | V |
| Built-in Limiting Resistance (RBSD) | Included in Bootstrap Diode | 80 | 100 | 120 | |
| Recommended Operation Conditions | |||||
| Supply Voltage (VPN) | Applied between P-NU, NV, NW | 0 | 300 | 400 | V |
| Control Supply Voltage (VDD) | Applied between VDD-COM | 13.5 | 15.0 | 16.5 | V |
| High-Side Bias Voltage (VDB) | Applied between VB(U)-U, VB(V)-V, VB(W)-W | 13.5 | 15.0 | 18.5 | V |
| Control Supply Variation (dVDD/dt, dVDB/dt) | -1 | - | 1 | V/s | |
| Arm Shoot-Through Blocking Time (tdead) | For each input signal | 1.0 | - | - | s |
| PWM Input Frequency (fPWM) | -40C < TJ < 150C | - | - | 20 | kHz |
| Minimum Input Pulse Width (PWIN(ON)) | 0.5 | - | - | s | |
| Minimum Input Pulse Width (PWIN(OFF)) | 0.5 | - | - | s | |
| COM Variation | Between COM-NU, NV, NW (including surge) | -5.0 | - | 5.0 | V |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
.gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c... .gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c...
Get in touch with us
Leave a Message, we will call you back quickly!