| Description | DIP-27 Power Driver Modules RoHS |
| Mfr. Part # | NFVA35065L42 |
| Package | DIP-27 |
| Model Number | NFVA35065L42 |
View Detail Information
Explore similar products
3 phase inverter module AOS AIP5D05K060Q4S with integrated HVIC drivers and
IPM Module AOS AIP5D15K060Q4 with Trench Shielded Planar Gate IGBT and Multiple
600 volt 10 amp 3 phase inverter module AOS AIP3D10A060Q6N for compressors
motor drive module AOS AIP3D05A060Q4N featuring 600 volt 5 amp trench shielded
Product Specification
| Description | DIP-27 Power Driver Modules RoHS | Mfr. Part # | NFVA35065L42 |
| Package | DIP-27 | Model Number | NFVA35065L42 |
The NFVA35065L42 is an advanced Automotive SPM module designed for hybrid and electric vehicles. It provides a high-performance inverter output stage with optimized gate drive for IGBTs, minimizing EMI and losses. The module integrates multiple protection features including under-voltage lockouts, over-current shutdown, and thermal monitoring, with fault reporting capabilities. It requires a single supply voltage and translates logic-level gate inputs to high-voltage drive signals. Separate negative IGBT terminals facilitate various control algorithms.
| Parameter | Conditions | Min. | Typ. | Max. | Unit |
| INVERTER PART | |||||
| Supply Voltage (VPN) | Applied between PNU, NV, NW | 500 | V | ||
| Supply Voltage (Surge) (VPN(Surge)) | Applied between PNU, NV, NW | 575 | V | ||
| CollectorEmitter Voltage (VCES) | 650 | V | |||
| Each IGBT Collector Current (IC) | TC = 100C, VDD 15 V, TJ 175C | 50 | A | ||
| Each IGBT Collector Current (Peak) (ICP) | TC = 25C, TJ 175C, Under 1 ms Pulse Width | 100 | A | ||
| Collector Dissipation (PC) | TC = 25C per One Chip | 115 | W | ||
| Operating Junction Temperature (TJ) | IGBT and Diode | 40 | 175 | C | |
| Operating Junction Temperature (TJ) | Driver IC | 40 | 150 | C | |
| Short Circuit Withstand Time (tSC) | VDD = VBS 16.5 V, VPN 400 V, TJ = 150C Nonrepetitive | 3 | s | ||
| Isolation Voltage (VISO) | 60 Hz, Sinusoidal, AC 1 minute, Connection Pins to Heat Sink Plate | 2500 | Vrms | ||
| Junction to Case Thermal Resistance (Rth(jc)Q) | Inverter IGBT part (per 1/6 module) | 1.30 | C/W | ||
| Junction to Case Thermal Resistance (Rth(jc)F) | Inverter FWD part (per 1/6 module) | 1.93 | C/W | ||
| Collector Emitter Saturation Voltage (VCE(SAT)) | VDD = VBS = 15 V, VIN = 5 V, IC = 50 A, TJ = 25C | 1.65 | 2.15 | V | |
| Collector Emitter Saturation Voltage (VCE(SAT)) | VDD = VBS = 15 V, VIN = 5 V, IC = 50 A, TJ = 175C | 2.05 | 2.65 | V | |
| Forward Voltage (VF) | VIN = 0 V, IF = 50 A, TJ = 25C | 1.75 | 2.35 | V | |
| Forward Voltage (VF) | VIN = 0 V, IF = 50 A, TJ = 175C | 1.70 | 2.30 | V | |
| High Side Turn-on Switching Time (HS tON) | VPN = 300 V, VDD = 15 V, IC = 50 A, TJ = 25C, Inductive Load | 0.75 | 1.20 | s | |
| High Side Turn-on Clamping Time (HS tC(ON)) | VPN = 300 V, VDD = 15 V, IC = 50 A, TJ = 25C, Inductive Load | 0.20 | 0.60 | s | |
| High Side Turn-off Switching Time (HS tOFF) | VPN = 300 V, VDD = 15 V, IC = 50 A, TJ = 25C, Inductive Load | 1.30 | 1.85 | s | |
| High Side Turn-off Clamping Time (HS tC(OFF)) | VPN = 300 V, VDD = 15 V, IC = 50 A, TJ = 25C, Inductive Load | 0.15 | 0.45 | s | |
| High Side Reverse Recovery Time (HS trr) | VPN = 300 V, VDD = 15 V, IC = 50 A, TJ = 25C, Inductive Load | 0.14 | s | ||
| Low Side Turn-on Switching Time (LS tON) | VPN = 300 V, VDD = 15 V, IC = 50 A, TJ = 25C, Inductive Load | 0.60 | 1.00 | s | |
| Low Side Turn-on Clamping Time (LS tC(ON)) | VPN = 300 V, VDD = 15 V, IC = 50 A, TJ = 25C, Inductive Load | 0.20 | 0.65 | s | |
| Low Side Turn-off Switching Time (LS tOFF) | VPN = 300 V, VDD = 15 V, IC = 50 A, TJ = 25C, Inductive Load | 1.15 | 1.65 | s | |
| Low Side Turn-off Clamping Time (LS tC(OFF)) | VPN = 300 V, VDD = 15 V, IC = 50 A, TJ = 25C, Inductive Load | 0.25 | 0.60 | s | |
| Low Side Reverse Recovery Time (LS trr) | VPN = 300 V, VDD = 15 V, IC = 50 A, TJ = 25C, Inductive Load | 0.14 | s | ||
| CollectorEmitter Leakage Current (ICES) | TJ = 25C, VCE = VCES | 3 | mA | ||
| CONTROL PART | |||||
| Control Supply Voltage (VDD) | Applied between VDD(H), VDD(L)COM | 20 | V | ||
| HighSide Control Bias Voltage (VBS) | Applied between VB(U)VS(U), VB(V)VS(V), VB(W)VS(W) | 20 | V | ||
| Input Signal Voltage (VIN) | Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL), IN(WL)COM | 0.3 | VDD+0.3 | V | |
| Fault Output Supply Voltage (VFO) | Applied between VFOCOM | 0.3 | VDD+0.3 | V | |
| Fault Output Current (IFO) | Sink Current at VFO pin | 2 | mA | ||
| Current Sensing Input Voltage (VSC) | Applied between CSCCOM | 0.3 | VDD+0.3 | V | |
| Quiescent VDD Supply Current (IQDDH) | VDD(H) = 15 V, IN(UH,VH.WH) = 0 V | 0.40 | mA | ||
| Quiescent VDD Supply Current (IQDDL) | VDD(L) = 15 V, IN(UL,VL,WL) = 0 V | 4.80 | mA | ||
| Operating VDD Supply Current (IPDDH) | VDD(H) = 15 V, fPWM = 20 kHz, duty = 50%, applied to one PWM signal input for HighSide | 0.48 | mA | ||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification:
Verified Supplier
.gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c... .gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c...
Get in touch with us
Leave a Message, we will call you back quickly!