Hefei Purple Horn E-Commerce Co., Ltd.
| Output Voltage(VO(on)) | 200mV |
| Input Resistor | 47kΩ |
| Resistor Ratio | 1 |
| Collector - Emitter Voltage VCEO | 50V |
| Description | Pre-Biased Bipolar Transistor (BJT) 50V 100mA 400mW Surface Mount SOT-23 |
| Mfr. Part # | LMUN2113LT1G |
| Package | SOT-23 |
| Model Number | LMUN2113LT1G |
View Detail Information
Explore similar products
NPN NPN Resistor Equipped Transistor PUMH24 115 from Nexperia designed to reduce
Automotive Grade Complementary Transistor Diodes DCX114YUQ 7 F Lead Free Green
NPN Digital Transistor JSCJ DTC123EE with Built In Bias Resistors and 50 Volt
Compact dual digital transistor ROHM EMH11T2R designed for inverter and driver
Product Specification
| Output Voltage(VO(on)) | 200mV | Input Resistor | 47kΩ |
| Resistor Ratio | 1 | Collector - Emitter Voltage VCEO | 50V |
| Description | Pre-Biased Bipolar Transistor (BJT) 50V 100mA 400mW Surface Mount SOT-23 | Mfr. Part # | LMUN2113LT1G |
| Package | SOT-23 | Model Number | LMUN2113LT1G |
The LMUN2111LT1G Series are PNP Silicon Surface Mount Transistors featuring a monolithic bias resistor network (BRT). Designed to replace individual transistors and external bias resistors, these devices simplify circuit design, reduce board space, and lower component count. They are ideal for low-power surface mount applications and are housed in a SOT-23 package with modified gull-winged leads for enhanced solderability and thermal stress absorption. The series is available on 8 mm embossed tape and reel.
| Model Series | Device Marking | R1 (K) | R2 (K) | Shipping (7-inch/3000 units) | Shipping (13-inch/10,000 units) |
|---|---|---|---|---|---|
| LMUN2111LT1G | A6A | 10 | 10 | 3000/Tape & Reel | 10,000/Tape & Reel |
| LMUN2110LT1G | A6O | 47 | 8 | 3000/Tape & Reel | 10,000/Tape & Reel |
| LMUN2112LT1G | A6B | 22 | 22 | 3000/Tape & Reel | 10,000/Tape & Reel |
| LMUN2113LT1G | A6C | 47 | 47 | 3000/Tape & Reel | 10,000/Tape & Reel |
| LMUN2114LT1G | A6D | 10 | 47 | 3000/Tape & Reel | 10,000/Tape & Reel |
| LMUN2115LT1G | A6E | 10 | 8 | 3000/Tape & Reel | 10,000/Tape & Reel |
| LMUN2116LT1G | A6F | 4.7 | 8 | 3000/Tape & Reel | 10,000/Tape & Reel |
| LMUN2130LT1G | A6G | 1.0 | 1.0 | 3000/Tape & Reel | 10,000/Tape & Reel |
| LMUN2131LT1G | A6H | 2.2 | 2.2 | 3000/Tape & Reel | 10,000/Tape & Reel |
| LMUN2132LT1G | A6J | 4.7 | 4.7 | 3000/Tape & Reel | 10,000/Tape & Reel |
| LMUN2133LT1G | A6K | 4.7 | 47 | 3000/Tape & Reel | 10,000/Tape & Reel |
| LMUN2134LT1G | A6L | 22 | 47 | 3000/Tape & Reel | 10,000/Tape & Reel |
| Characteristic | Symbol | Value | Unit | Notes |
|---|---|---|---|---|
| Collector-Base Voltage | VCBO | 50 | Vdc | |
| Collector-Emitter Voltage | VCEO | 50 | Vdc | |
| Collector Current | IC | 100 | mAdc | |
| Total Device Dissipation (TA = 25C) | PD | 246 (Note 1.) / 400 (Note 2.) | mW | Derate above 25C: 1.5 (Note 1.) / 2.0 (Note 2.) C/W |
| Thermal Resistance Junction-to-Ambient | RJA | 508 (Note 1.) / 311 (Note 2.) | C/W | |
| Thermal Resistance Junction-to-Lead | RJL | 174 (Note 1.) / 208 (Note 2.) | C/W | |
| Junction and Storage Temperature Range | TJ, Tstg | 55 to +150 | C | |
| Collector-Base Cutoff Current (VCB = 50 V, IE = 0) | ICBO | 100 nAdc | ||
| Collector-Emitter Cutoff Current (VCE = 50 V, IB = 0) | ICEO | 500 nAdc | ||
| Emitter-Base Cutoff Current (VEB = 6.0 V, IC = 0) | IEBO | 0.5 (LMUN2111LT1G) etc. | mAdc | Values vary by model |
| Collector-Base Breakdown Voltage (IC = 10 A, IE = 0) | V(BR)CBO | 50 | Vdc | |
| Collector-Emitter Breakdown Voltage (IC = 2.0 mA, IB = 0) | V(BR)CEO | 50 | Vdc | Pulse Test: Pulse Width < 300 s, Duty Cycle < 2.0% |
| DC Current Gain (VCE = 10 V, IC = 5.0 mA) | hFE | 35 to 250 | Values vary by model | |
| Collector-Emitter Saturation Voltage (IC = 10 mA, IB = 0.3 mA) | VCE(sat) | 0.25 Vdc | Values vary by model | |
| Output Voltage (on) (VCC = 5.0 V, VB = 2.5 V, RL = 1.0 k) | VOL | 0.2 | Vdc | Values vary by model |
| Output Voltage (off) (VCC = 5.0 V, VB = 0.5 V, RL = 1.0 k) | VOH | 4.9 | Vdc | Values vary by model |
| Input Resistor R1 | R1 | 0.7 to 61.1 | k | Values vary by model |
| Resistor Ratio R1/R2 | R1/R2 | 0.055 to 1.2 | Values vary by model |
Notes for Thermal Characteristics:
1. FR4 @ Minimum Pad
2. FR4 @ 1.0 x 1.0 inch Pad
Notes for Breakdown Voltages:
4. Pulse Test: Pulse Width < 300 s, Duty Cycle < 2.0%
Notes for ON Characteristics:
5. Pulse Test: Pulse Width < 300 s, Duty Cycle < 2.0%
New Devices:
3. New devices. Updated curves to follow in subsequent data sheets.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
.gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c... .gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c...
Get in touch with us
Leave a Message, we will call you back quickly!