Hefei Purple Horn E-Commerce Co., Ltd.
| Holding Current (Ih) | 5mA |
| Current - Gate Trigger(Igt) | 75uA |
| Voltage - On State(Vtm) | 2.2V |
| Current - On State(It(RMS)) | 4A |
| Peak off - state voltage(Vdrm) | 400V |
| Current - Surge(Itsm@f) | 25A@60Hz |
| SCR Type | - |
| Operating Temperature | -40℃~+110℃ |
| Gate Trigger Voltage (Vgt) | 800mV |
| Description | 400V 4A Surface Mount TO-252(DPAK) |
| Mfr. Part # | MCR716T4G |
| Package | TO-252(DPAK) |
| Model Number | MCR716T4G |
View Detail Information
Explore similar products
high volume Littelfuse MCR708AG silicon controlled rectifier for temperature
High density PCB silicon controlled rectifiers Littelfuse NYC0102BLT1G with
Phase control SCR Littelfuse S4020LTP with glass passivated junctions and matte
Sensitive SCR component Littelfuse S6X8BSRP with 0.8 Amp current rating and high
Product Specification
| Holding Current (Ih) | 5mA | Current - Gate Trigger(Igt) | 75uA |
| Voltage - On State(Vtm) | 2.2V | Current - On State(It(RMS)) | 4A |
| Peak off - state voltage(Vdrm) | 400V | Current - Surge(Itsm@f) | 25A@60Hz |
| SCR Type | - | Operating Temperature | -40℃~+110℃ |
| Gate Trigger Voltage (Vgt) | 800mV | Description | 400V 4A Surface Mount TO-252(DPAK) |
| Mfr. Part # | MCR716T4G | Package | TO-252(DPAK) |
| Model Number | MCR716T4G |
The MCR716 and MCR718 are surface mount thyristors designed for high volume, low cost, industrial and consumer applications. They feature a small size, passivated die for reliability, low level triggering, and Pb-Free package options. These devices are suitable for applications such as motor control, process control, and temperature, light, and speed control.
| Rating | Symbol | MCR716 (V) | MCR718 (V) | Unit | Conditions |
| Peak Repetitive OffState Voltage | VDRM, VRRM | 400 | 600 | V | TJ = 40 to 125C, Sine Wave, 50 to 60 Hz, Gate Open |
| On-State RMS Current | IT (RMS) | 4.0 | A | All Conduction Angles; TC = 90C | |
| Average OnState Current | IT(AV) | 2.6 | A | 180 Conduction Angles; TC = 90C | |
| Peak Non-Repetitive Surge Current | ITSM | 25 | A | 1/2 Cycle, Sine Wave 60 Hz, TJ = 110C | |
| Circuit Fusing Consideration | I2t | 2.6 | Asec | t = 8.3 ms | |
| Forward Peak Gate Power | PGM | 0.5 | W | Pulse Width 10. sec,TC = 90C | |
| Forward Average Gate Power | PGM (AV) | 0.1 | W | t = 8.3 msec, TC = 90C | |
| Forward Peak Gate Current | IGM | 0.2 | A | Pulse Width 1.0 sec, TC= 90C | |
| Operating Junction Temperature Range | TJ | -40 to +110 | C | ||
| Storage Temperature Range | Tstg | -40 to +150 | C | ||
| Thermal Resistance, JunctiontoCase | RJC | 3.0 | C/W | ||
| Thermal Resistance, JunctiontoAmbient | RJA | 80 | C/W | Case 369C, surface mounted on minimum recommended pad size. | |
| Maximum Lead Temperature for Soldering Purposes | TL | 260 | C | 1/8" from Case for 10 Seconds | |
| Peak Repetitive Forward or Reverse Blocking Current | IDRM, IRRM | 10 | A | VAK = Rated VDRM or VRRM, RGK = 1.0 k TJ = 25C | |
| Peak Repetitive Forward or Reverse Blocking Current | IDRM, IRRM | 200 | A | VAK = Rated VDRM or VRRM, RGK = 1.0 k TJ = 110C | |
| Critical Rate of Rise of OffState Voltage | dv/dt | 5.0 | V/s | VD = 0.67 X Rated VDRM, Exponential Waveform, RGK = 1.0 k, TJ = 110C | |
| Critical Rate of Rise of OnState Current | di/dt | 100 | As | IPK = 50 A, Pw = 40 s, diG/dt = 1 A/s, Igt = 50 mA | |
| Peak Reverse Gate Blocking Voltage | VGRM | 10 to 18 | V | IGR = 10 A | |
| Peak Reverse Gate Blocking Current | IRGM | 1.2 | A | VGR = 10 V | |
| Peak Forward OnState Voltage | VTM | 1.3 to 1.5 | V | ITM = 5.0 A Peak (Pulse Test) | |
| Peak Forward OnState Voltage | VTM | 1.5 to 2.2 | V | ITM = 8.2 A Peak (Pulse Test) | |
| Gate Trigger Current (Continuous dc) | IGT | 1.0 to 75 | A | VAK = 12 Vdc, RL = 30 , TJ = 25C | |
| Gate Trigger Current (Continuous dc) | IGT | 300 | A | VAK = 12 Vdc, RL = 30 , TJ = 40C | |
| Gate Trigger Voltage (Continuous dc) | VGT | 0.3 to 0.8 | V | VD = 12 VDC, RL = 30 , TJ = 25C | |
| Gate Trigger Voltage (Continuous dc) | VGT | 1.0 | V | VD = 12 VDC, RL = 30 , TJ = 40C | |
| Holding Current | IH | 0.4 to 5.0 | mA | VD = 12 V, Initiating Current = 200 mA, RGK = 1 k, TJ = 25C | |
| Holding Current | IH | 10 | mA | VD = 12 V, Initiating Current = 200 mA, RGK = 1 k, TJ = 40C | |
| Latching Current | IL | 5.0 | mA | VD = 12 VDC, IG = 2.0 mA, TC = 25C | |
| Latching Current | IL | 10 | mA | VD = 12 VDC, IG = 2.0 mA, TC = -40C | |
| Total TurnOn Time | tgt | 2.0 to 5.0 | s | Source Voltage = 12 V, RS = 6.0 k, IT = 8 A(pk), RGK = 1.0 k | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
.gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c... .gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c...
Get in touch with us
Leave a Message, we will call you back quickly!