| Current - Collector(Ic) | 1A |
| Collector - Emitter Voltage VCEO | 20V |
| Description | 1A 20V UDFN-3030-10-EP Bipolar Transistor Arrays RoHS |
| Mfr. Part # | ULN2003F12FN-7 |
| Package | UDFN-3030-10-EP |
| Model Number | ULN2003F12FN-7 |
View Detail Information
Explore similar products
HGSEMI ULN2803ADMTR Darlington array IC featuring eight NPN pairs for multi load
Darlington array HGSEMI ULN2001N supporting up to 50 volts and 500 milliamps
8 channel Darlington transistor array driver HTC TD62783AD suitable for
switching transistor array HTC ULN2004AD featuring seven NPN Darlington pairs
Product Specification
| Current - Collector(Ic) | 1A | Collector - Emitter Voltage VCEO | 20V |
| Description | 1A 20V UDFN-3030-10-EP Bipolar Transistor Arrays RoHS | Mfr. Part # | ULN2003F12FN-7 |
| Package | UDFN-3030-10-EP | Model Number | ULN2003F12FN-7 |
The ULN2003V12 and ULN2003F12 are multi-channel sink drivers featuring 7-channel and 4-channel output stages respectively. The ULN2003V12 offers a low power upgrade to the ULN2003A family, dissipating significantly less power when driving typical 12V relay coils. The ULN2003F12 is a lower power variant suitable for applications requiring fewer channels, such as low voltage stepping motors. Both devices support 3.3V to 5V CMOS logic input, are compatible with various micro-controllers, and feature an improved input interface that minimizes DC current draw. Integrated RC snubbers enhance performance in noisy environments, and internal pull-down resistors allow for tri-stating input logic. Each output includes an internal free-wheeling diode for inductive load protection. Adjacent channels can be combined in parallel to increase current sink capability, with the ULN2003V12 supporting up to 1.0A with all 7 channels paralleled.
| Parameter | ULN2003V12 | ULN2003F12 | Unit | Conditions |
| Channels | 7 | 4 | - | - |
| Output Pull-up Voltage | - | 20 | V | - |
| Low Output VOL (Typical) | 0.6 | 0.6 | V | 100mA (Typ.) Current Sink per Channel at 3.3V Logic Input |
| Low Output VOL (Typical) | 0.6 | 0.6 | V | 140mA (Typ.) Current Sink per Channel at 5.0V Logic Input |
| Input Logic Interface | 3.3V to 5V CMOS | 3.3V to 5V CMOS | - | - |
| Internal Free-Wheeling Diodes | Yes | Yes | - | - |
| Input Pull-down Resistors | Yes | Yes | - | Allows Tri-Stating |
| Input RC-Snubber | Yes | Yes | - | Eliminates Spurious Operation |
| ESD | 4kV HBM, 1kV CDM | 4kV HBM, 1kV CDM | - | - |
| Package Options | 16-Pin SOIC, 16-Pin TSSOP | 10-Pin DFN3030 | - | - |
| Max GND-Pin Continuous Current (TJ < +100C) | 1.0 | 1.0 | A | - |
Max GND-Pin Continuous Current (+100C | 0.7 | 0.7 | A | - | |
| Junction Temperature | -55 to 150 | -55 to 150 | C | - |
| Storage Temperature | -55 to 150 | -55 to 150 | C | - |
| VI(on) (Logic High Input Voltage) | 1.65 | 1.65 | V | VCE = 2V, IC = 300mA |
| VI(off) (Logic Low Input Voltage) | 0.6 | 0.6 | V | II = 250A, IC = 100mA |
| II(on) (ON State Input Current) | 12 (Typ.) | 12 (Typ.) | A | IF = 350mA |
| II(off) (OFF State Input Leakage) | 250 (Max.) | 250 (Max.) | nA | - |
| VOL(vce-sat) (Low-Level Output Voltage) | 0.15 | 0.15 | V | VINX = 3.3V, IOUTX = 20mA |
| VOL(vce-sat) (Low-Level Output Voltage) | 0.75 | 0.75 | V | VINX = 3.3V, IOUTX = 100mA |
| VOL(vce-sat) (Low-Level Output Voltage) | 0.11 | 0.11 | V | VINX = 5.0V, IOUTX = 20mA |
| VOL(vce-sat) (Low-Level Output Voltage) | 0.75 | 0.75 | V | VINX = 5.0V, IOUTX = 140mA |
| IOUT(on) (ON-State Continuous Current) | 100 (Typ.) | 100 (Typ.) | A | VINX = 3.3V, VOUTX = 0.6V |
| IOUT(on) (ON-State Continuous Current) | 140 (Typ.) | 140 (Typ.) | A | VINX = 5.0V, VOUTX = 0.6V |
| IOUT(on) (OFF-State Leakage Current) | 0.5 (Typ.) | 0.5 (Typ.) | A | VINX = 0V, VOUTX = VCOM =16V |
| tPHL (Logic High Propagation Delay) | 70 (Max.) | 70 (Max.) | ns | VINX = 3.3V, Vpull-up = 12V, Rpull-up = 1k |
| tPLH (Logic Low Propagation Delay) | 140 (Max.) | 140 (Max.) | ns | VINX = 3.3V, Vpull-up = 12V, Rpull-up = 1k |
| tCHANNEL (Channel-to-Channel Delay) | 50 (Max.) | 50 (Max.) | ns | Over recommended operating conditions and with same test conditions on channels. |
| RPD (Input Pull-down Resistance) | 300k (Typ.) | 300k (Typ.) | - | |
| (Input Filter Time Constant) | 9 (Typ.) | 9 (Typ.) | ns | - |
| COUT (Output Capacitance) | 15 (Typ.) | 15 (Typ.) | pF | VINX = 3.3V, VOUTX = 0.4V |
| VF (Free-Wheeling Diode Forward Voltage Drop) | 1.2 (Typ.) | 1.2 (Typ.) | V | IF-peak = 140mA |
| IF-peak (Diode Peak Forward Current) | 140 | 140 | mA | - |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification:
Verified Supplier
.gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c... .gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c...
Get in touch with us
Leave a Message, we will call you back quickly!