Hefei Purple Horn E-Commerce Co., Ltd.
| Current - Collector(Ic) | 500mA |
| Collector - Emitter Voltage VCEO | 50V |
| Description | 500mA 50V SOP-18-300mil Bipolar Transistor Arrays RoHS |
| Mfr. Part # | ULN2803AG |
| Package | SOP-18-300mil |
| Model Number | ULN2803AG |
View Detail Information
Explore similar products
HGSEMI ULN2803ADMTR Darlington array IC featuring eight NPN pairs for multi load
Darlington array HGSEMI ULN2001N supporting up to 50 volts and 500 milliamps
8 channel Darlington transistor array driver HTC TD62783AD suitable for
switching transistor array HTC ULN2004AD featuring seven NPN Darlington pairs
Product Specification
| Current - Collector(Ic) | 500mA | Collector - Emitter Voltage VCEO | 50V |
| Description | 500mA 50V SOP-18-300mil Bipolar Transistor Arrays RoHS | Mfr. Part # | ULN2803AG |
| Package | SOP-18-300mil | Model Number | ULN2803AG |
The ULN2803A is a monolithic high-voltage, high-current Darlington transistor array. It consists of eight independent Darlington driver circuits, each with a built-in suppression diode for inductive loads like relays and stepper motors. Each Darlington pair can output 500mA, and parallel connections allow for higher current capabilities. This array is suitable for driving relays, lighting, LED displays, stepper motors, and as logic buffers. With a 2.7K base resistor in each channel, it can interface directly with TTL/CMOS logic circuits operating at 5V, eliminating the need for standard logic buffers.
| Parameter | Symbol | Conditions | Min | Typical | Max | Unit | Notes |
| Absolute Maximum Ratings | |||||||
| Collector-Emitter Voltage | VCE | -0.5 | 50 | V | |||
| COM Terminal Voltage | VCOM | 50 | V | ||||
| Input Voltage | VI | -0.5 | 30 | V | |||
| Collector Peak Current | ICP | per channel | 500 | mA/ch | |||
| Output Clamp Diode Peak Forward Current | IOK | 500 | mA | ||||
| Total Emitter Peak Current | IET | -2.5 | A | ||||
| Maximum Operating Junction Temperature | TJ | 150 | (2) | ||||
| Storage Temperature Range | Tstg | -60 | +150 | ||||
| Power Dissipation (SOP18) | PD | 0.54/0.625(3) | W | (1), (2), (3) | |||
| Power Dissipation (QFN20L) | PD | 1.3 | W | (1), (2) | |||
| Recommended Operating Conditions | |||||||
| Collector-Emitter Voltage | VCE | 0 | 50 | V | |||
| Output Current | IOUT | TPW=25ms, TA=85, TJ=120, Duty=10% | 0 | 233 | mA/ch | ||
| Output Current | IOUT | Duty=50% | 0 | 70 | mA/ch | ||
| Control Signal Input Voltage | VIN | 0 | 24 | V | |||
| Input Voltage (Output ON) | VIN(ON) | Iout=400mA, hFE=800 | 2.8 | 24 | V | ||
| Input Voltage (Output OFF) | VIN(OFF) | 0 | 0.7 | V | |||
| Clamp Diode Reverse Voltage | VR | 50 | V | ||||
| Clamp Diode Peak Forward Current | IF | 350 | mA | ||||
| Operating Temperature Range | TA | -40 | +85 | ||||
| Power Dissipation (SOP18) | PD | TA= 85 | -- | 0.325 | W | ||
| Power Dissipation (QFN20L) | PD | TA= 85 | -- | 0.6 | W | ||
| Electrical Characteristics | |||||||
| Turn-ON Input Voltage | VI(ON) | VCE=2V, IC=200mA | 1.9 | 2.4 | V | Fig 4 | |
| Turn-ON Input Voltage | VI(ON) | IC=250mA | 2.0 | 2.7 | V | Fig 4 | |
| Turn-ON Input Voltage | VI(ON) | IC=300mA | 2.1 | 3 | V | Fig 4 | |
| Collector-Emitter Saturation Voltage | VCE(SAT) | VI=2.4V, IC=30mA | 0.78 | V | Fig 5 | ||
| Collector-Emitter Saturation Voltage | VCE(SAT) | VI=2.4V, IC=60mA | 0.82 | V | Fig 5 | ||
| Collector-Emitter Saturation Voltage | VCE(SAT) | VI=2.4V, IC=120mA | 0.9 | V | Fig 5 | ||
| Collector-Emitter Saturation Voltage | VCE(SAT) | VI=2.4V, IC=240mA | 1.1 | V | Fig 5 | ||
| Collector-Emitter Saturation Voltage | VCE(SAT) | VI=2.4V, IC=350mA | 1.25 | V | Fig 5 | ||
| Clamp Diode Forward Voltage | VF | IF=350mA | 1.4 | 1.6 | V | Fig 8 | |
| Collector OFF-State Leakage Current | ICEX | VCE=50V, II=0 | 50 | A | Fig 1 | ||
| Collector OFF-State Leakage Current | ICEX | VCE=50V, TA=85, VI=0V | 100 | A | Fig 2 | ||
| Input Current | II | VIN=12V, IC=60mA | 4 | mA | Fig 4 | ||
| Input Current | II | VIN=6V | 1.7 | mA | Fig 4 | ||
| Input Current | II | VIN=4.5V | 1.1 | mA | Fig 4 | ||
| Input Current | II | VIN=2.4V | 0.35 | mA | Fig 4 | ||
| Clamp Diode Reverse Current | IR | VR=50V | 100 | A | Fig 7 | ||
| Input Capacitance | CIN | 15 | pF | ||||
| Propagation Delay Low-to-High | tPLH | VL=12V, RL=45 | 0.15 | 1 | s | Fig 9 | |
| Propagation Delay High-to-Low | tPHL | VL=12V, RL=45 | 0.15 | 1 | s | Fig 9 | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
.gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c... .gtr-container-a1b2c3d4 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; font-size: 14px; box-sizing: border-box; } .gtr-container-a1b2c3d4 .gtr-heading { font-size: 18px; font-weight: bold; c...
Get in touch with us
Leave a Message, we will call you back quickly!