Changsha Purple Horn E-Commerce Co., Ltd.
| Current - Supply | 12mA |
| Voltage - Supply | 4.5V~5.5V |
| Interface | SPI |
| Description | SPI TSSOP-16 Angle, Linear Position Measuring RoHS |
| Mfr. Part # | MT6501GT-ADD |
| Package | TSSOP-16 |
| Model Number | MT6501GT-ADD |
View Detail Information
Explore similar products
Automotive Hall Effect Sensor ALLEGRO A19302PUBATN-RAE-A with ASIL B Safety and
Robust Honeywell RTY270LVNAX rotary position sensor with NdFeB magnet and PBT
High resolution LVIT linear sensor Alliance Memory GHSI-19-100-A-02-20-S
Non contact rotary position sensor Honeywell RTP090HVEAA-01 with Hall effect and
Product Specification
| Current - Supply | 12mA | Voltage - Supply | 4.5V~5.5V |
| Interface | SPI | Description | SPI TSSOP-16 Angle, Linear Position Measuring RoHS |
| Mfr. Part # | MT6501GT-ADD | Package | TSSOP-16 |
| Model Number | MT6501GT-ADD |
The Magntek MT6501 is a next-generation angle position sensor IC based on advanced Anisotropic Magnetoresistance (AMR) technology. It offers 0-360 absolute angle position detection with high reliability and non-contact measurement. The chip integrates two pairs of AMR Wheatstone bridges and specialized signal processing circuitry. It features overvoltage and overcurrent protection, programmable detection range and output curves, and offers flexible output options including analog, PWM, and switch outputs with 12-bit resolution for analog/PWM. The MT6501 is suitable for industrial and automotive applications requiring non-contact in-shaft position sensing, such as throttle position, steering wheel angle, and pedal position detection.
| Parameter | Description | Conditions | Min | Typical | Max | Unit |
|---|---|---|---|---|---|---|
| General | ||||||
| VDD | Power Supply Voltage | 4.5 | 5.0 | 5.5 | V | |
| IDD | Operating Current after Chip Startup | Single-channel SOP-8 | 6 | 9 | mA | |
| IDD | Operating Current after Chip Startup | Dual-channel TSSOP-16 | 12 | 18 | mA | |
| IDDPU | Transient Peak Current during Chip Startup | Single-channel SOP-8 | 60 | mA | ||
| IDDPU | Transient Peak Current during Chip Startup | Dual-channel TSSOP-16 | 120 | mA | ||
| Timing Parameters | ||||||
| FS | System Clock Frequency Range | -10 | - | 10 | % | |
| FR | Analog Output Refresh Rate | - | 4,000 | - | Hz | |
| FPWM | PWM Frequency (Programmable) | Customer Programmable | 976Hz, 488Hz, 244Hz, 122Hz (-8%) | (+8%) | Hz | |
| TSTEP | Step Response Time | - | - | 1,000 | s | |
| TSU | Power-on Settling Time | - | - | 15 | ms | |
| Analog Output Parameters | ||||||
| IOUT | Analog Output Current | Analog Output Mode | -15 | - | 15 | mA |
| ISHORT | Output Short Circuit Current (with Overcurrent Protection) | Short to Ground | - | - | 25 | mA |
| ISHORT | Output Short Circuit Current (with Overcurrent Protection) | Short to Power | - | - | 25 | mA |
| RL | Analog Output Driving Resistance Load | External pull-down resistor to ground | 5,000 | - | - | |
| RL | Analog Output Driving Resistance Load | External pull-up resistor to power | 1,000 | - | - | |
| VSAT_LO | Analog Output Low Level Saturation Voltage | External pull-up resistor RL 1K | - | 2 | 4 | % VDD |
| VSAT_HI | Analog Output High Level Saturation Voltage | External pull-down resistor RL 5K | 95 | 97 | - | % VDD |
| CLAMP_LO | Analog Output Low Level Clamp Voltage | Programmable | 2 | - | - | % VDD |
| CLAMP_HIGH | Analog Output High Level Clamp Voltage | Programmable | - | - | 98 | % VDD |
| SR | Analog Output Slew Rate | Output load capacitance CL 10nF | - | 500 | - | V/ms |
| SR | Analog Output Slew Rate | Output load capacitance CL 100nF | - | 100 | - | V/ms |
| Digital Output Parameters | ||||||
| PWM_VOL | PWM Output Low Level | Open-drain mode (IOUT=10mA) | - | - | 7 | % VDD |
| GPIO_VOL | General Purpose Digital I/O Low Level | Push-pull output (IOUT=5mA) | - | - | 5 | % VDD |
| GPIO_VOH | General Purpose Digital I/O High Level | Push-pull output (IOUT=5mA) | 90 | - | - | % VDD |
| GPIO_VIL | General Purpose Digital I/O Input Low Level | - | - | 30 | % VDD | |
| GPIO_VIH | General Purpose Digital I/O Input High Level | 70 | - | - | % VDD | |
| TRISE | Digital Output Rise Time | Push-pull output (RL=10K, CL=10nF) | - | 3.0 | - | s |
| TFALL | Digital Output Fall Time | Push-pull output (RL=10K, CL=10nF) | - | 1.8 | - | s |
| Accuracy Parameters | ||||||
| INL | Integral Non-Linearity | -1 | - | 1 | ||
| INL_TD | Integral Non-Linearity - Temperature Drift | -40~150 | -0.5 | - | 0.5 | |
| ANG_NOI | Input Equivalent Noise (RMS) (Excluding DAC Noise) | - | 0.01 | 0.02 | ||
| ERM | Analog Output vs. Power Supply Proportional Error | Note [1] | -0.1 | - | 0.1 | % VDD |
| DAC_RES | Digital-to-Analog Converter Resolution | - | 12 | - | bits | |
| DAC_FS | Digital-to-Analog Converter Full Scale | - | 99 | - | % | |
| DAC_FS_TD | Digital-to-Analog Converter Full Scale Temperature Drift | -40~150 | -0.3 | - | 0.3 | % VDD |
| DAC_OS | Digital-to-Analog Converter Offset Voltage | -0.5 | - | 0.5 | % VDD | |
| DAC_OS_TD | Digital-to-Analog Converter Offset Voltage Temperature Drift | -40~150 | -0.25 | - | 0.25 | % VDD |
| DAC_NOI | Digital-to-Analog Converter Noise (RMS) | - | 0.03 | - | % VDD | |
| External Magnetic Field Parameters | ||||||
| Dmag | Magnet Diameter | Recommended 8.0mm | - | 8.0 | - | mm |
| Tmag | Magnet Thickness | Recommended 2.5mm | - | 2.5 | - | mm |
| Bpk | Input Magnetic Field Strength | Measured at chip surface | 300 | - | 10,000 | Gauss |
| AG | Gap | Distance between chip surface and magnet | - | - | 3.0 | mm |
| RS | Rotation Speed | - | - | 300 | RPM | |
| TCmag1 | Magnet Temperature Coefficient | NdFeB magnet | - | -0.12 | - | %/C |
| TCmag2 | Magnet Temperature Coefficient | SmCo magnet | - | -0.035 | - | %/C |
| Package Information | ||||||
| Model | Description | |||||
| MT6501CT-ADD | SOP-8 package, Tube (100pcs/tube) or Tape & Reel (3000pcs/reel) | |||||
| MT6501GT-ADD | TSSOP-16 package, Tube (60pcs/tube) or Tape & Reel (3000pcs/reel) | |||||
| Pin Name | Pin No. | Type | Description |
|---|---|---|---|
| VDD | 1 | Power | 5V Power Supply |
| CSN/T0 | 2 | Digital Input/Output | SPI Chip Select CSN input or Test0 in internal test mode |
| SWO/T1 | 3 | Digital Input/Output | Switch Output (SWO) or Test1 in internal test mode |
| SCK | 4 | Digital Input | SPI Clock Signal Input |
| OUT | 5 | Analog Output/Digital Input/Output | Analog Output or PWM Output or Single-Wire Communication (OWI) |
| SDAT/T2 | 6 | Digital Input/Output | SPI Data or Test2 in internal test mode |
| T3 | 7 | Digital Input/Output | Test3 in internal test mode |
| VSS | 8 | Ground | Ground |
| Pin Name | Pin No. | Type | Description |
|---|---|---|---|
| T3_1 | 1 | Digital Input/Output | CH1 chip internal test mode Test3 |
| VSS_1 | 2 | Ground | CH1 chip ground |
| VDD_1 | 3 | Power | CH1 chip 5V power supply |
| CSN_1/T0_1 | 4 | Digital Input/Output | CH1 chip SPI Chip Select CSN input or Test0 in internal test mode |
| SWO_2/T1_2 | 5 | Digital Input/Output | CH2 chip Switch Output (SWO) or Test1 in internal test mode |
| OUT_2 | 6 | Analog Output/Digital Input/Output | CH2 chip Analog Output or PWM Output or Single-Wire Communication |
| SCK_2 | 7 | Digital Input | CH2 chip SPI Clock Signal Input |
| SDAT_2/T2_2 | 8 | Digital Input/Output | CH2 chip SPI Data or Test2 in internal test mode |
| T3_2 | 9 | Digital Input/Output | CH2 chip internal test mode Test3 |
| VSS_2 | 10 | Ground | CH2 chip ground |
| VDD_2 | 11 | Power | CH2 chip 5V power supply |
| CSN_2/T0_2 | 12 | Digital Input/Output | CH2 chip SPI Chip Select CSN input or Test0 in internal test mode |
| SWO_1/T1_1 | 13 | Digital Input/Output | CH1 chip Switch Output (SWO) or Test1 in internal test mode |
| SCK_1 | 14 | Digital Input | CH1 chip SPI Clock Signal Input |
| OUT_1 | 15 | Analog Output/Digital Input/Output | CH1 chip Analog Output (SWO) or PWM Output or Single-Wire Communication |
| SDAT_1/T2_1 | 16 | Digital Input/Output | CH1 chip SPI Data or Test2 in internal test mode |
| Parameter | Description | Conditions | Min | Typical | Max | Unit |
|---|---|---|---|---|---|---|
| VDD | Power Supply Voltage | 4.5 | 5.0 | 5.5 | V | |
| IDD | Operating Current after Chip Startup | Single-channel SOP-8 | 6 | 9 | mA | |
| IDD | Operating Current after Chip Startup | Dual-channel TSSOP-16 | 12 | 18 | mA | |
| IDDPU | Transient Peak Current during Chip Startup | Single-channel SOP-8 | 60 | mA | ||
| IDDPU | Transient Peak Current during Chip Startup | Dual-channel TSSOP-16 | 120 | mA | ||
| FR | Analog Output Refresh Rate | - | 4,000 | - | Hz | |
| FPWM | PWM Frequency (Programmable) | Customer Programmable | 976Hz, 488Hz, 244Hz, 122Hz (-8%) | (+8%) | Hz | |
| TSU | Power-on Settling Time | - | - | 15 | ms | |
| IOUT | Analog Output Current | Analog Output Mode | -15 | - | 15 | mA |
| ISHORT | Output Short Circuit Current (with Overcurrent Protection) | Short to Ground | - | - | 25 | mA |
| ISHORT | Output Short Circuit Current (with Overcurrent Protection) | Short to Power | - | - | 25 | mA |
| RL | Analog Output Driving Resistance Load | External pull-down resistor to ground | 5,000 | - | - | |
| RL | Analog Output Driving Resistance Load | External pull-up resistor to power | 1,000 | - | - | |
| VSAT_LO | Analog Output Low Level Saturation Voltage | External pull-up resistor RL 1K | - | 2 | 4 | % VDD |
| VSAT_HI | Analog Output High Level Saturation Voltage | External pull-down resistor RL 5K | 95 | 97 | - | % VDD |
| CLAMP_LO | Analog Output Low Level Clamp Voltage | Programmable | 2 | - | - | % VDD |
| CLAMP_HIGH | Analog Output High Level Clamp Voltage | Programmable | - | - | 98 | % VDD |
| SR | Analog Output Slew Rate | Output load capacitance CL 10nF | - | 500 | - | V/ms |
| SR | Analog Output Slew Rate | Output load capacitance CL 100nF | - | 100 | - | V/ms |
| PWM_VOL | PWM Output Low Level | Open-drain mode (IOUT=10mA) | - | - | 7 | % VDD |
| GPIO_VOL | General Purpose Digital I/O Low Level | Push-pull output (IOUT=5mA) | - | - | 5 | % VDD |
| GPIO_VOH | General Purpose Digital I/O High Level | Push-pull output (IOUT=5mA) | 90 | - | - | % VDD |
| GPIO_VIL | General Purpose Digital I/O Input Low Level | - | - | 30 | % VDD | |
| GPIO_VIH | General Purpose Digital I/O Input High Level | 70 | - | - | % VDD | |
| TRISE | Digital Output Rise Time | Push-pull output (RL=10K, CL=10nF) | - | 3.0 | - | s |
| TFALL | Digital Output Fall Time | Push-pull output (RL=10K, CL=10nF) | - | 1.8 | - | s |
| INL | Integral Non-Linearity | -1 | - | 1 | ||
| INL_TD | Integral Non-Linearity - Temperature Drift | -40~150 | -0.5 | - | 0.5 | |
| ANG_NOI | Input Equivalent Noise (RMS) (Excluding DAC Noise) | - | 0.01 | 0.02 | ||
| ERM | Analog Output vs. Power Supply Proportional Error | Note [1] | -0.1 | - | 0.1 | % VDD |
| DAC_RES | Digital-to-Analog Converter Resolution | - | 12 | - | bits | |
| DAC_FS | Digital-to-Analog Converter Full Scale | - | 99 | - | % | |
| DAC_FS_TD | Digital-to-Analog Converter Full Scale Temperature Drift | -40~150 | -0.3 | - | 0.3 | % VDD |
| DAC_OS | Digital-to-Analog Converter Offset Voltage | -0.5 | - | 0.5 | % VDD | |
| DAC_OS_TD | Digital-to-Analog Converter Offset Voltage Temperature Drift | -40~150 | -0.25 | - | 0.25 | % VDD |
| DAC_NOI | Digital-to-Analog Converter Noise (RMS) | - | 0.03 | - | % VDD | |
| Dmag | Magnet Diameter | Recommended 8.0mm | - | 8.0 | - | mm |
| Tmag | Magnet Thickness | Recommended 2.5mm | - | 2.5 | - | mm |
| Bpk | Input Magnetic Field Strength | Measured at chip surface | 300 | - | 10,000 | Gauss |
| AG | Gap | Distance between chip surface and magnet | - | - | 3.0 | mm |
| RS | Rotation Speed | - | - | 300 | RPM |
| Parameter | Description | Min | Max | Unit |
|---|---|---|---|---|
| Power Supply Voltage | -30 | 30 | V | |
| Analog Output Voltage | -0.3 | 18 | V | |
| Output Current | -30 | 30 | mA | |
| Storage Temperature | -40 | 150 | C | |
| Magnetic Field Strength | -1 | 1 | Tesla | |
| Electrostatic Discharge Capability (HBM) | -3,500 | 3,500 | V |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa... Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa...
Get in touch with us
Leave a Message, we will call you back quickly!