Changsha Purple Horn E-Commerce Co., Ltd.
| Description | QFN-16-EP(6x6) Angle, Linear Position Measuring RoHS |
| Mfr. Part # | AS5262-HMFP |
| Package | QFN-16-EP(6x6) |
| Model Number | AS5262-HMFP |
View Detail Information
Explore similar products
Automotive Hall Effect Sensor ALLEGRO A19302PUBATN-RAE-A with ASIL B Safety and
Robust Honeywell RTY270LVNAX rotary position sensor with NdFeB magnet and PBT
High resolution LVIT linear sensor Alliance Memory GHSI-19-100-A-02-20-S
Non contact rotary position sensor Honeywell RTP090HVEAA-01 with Hall effect and
Product Specification
| Description | QFN-16-EP(6x6) Angle, Linear Position Measuring RoHS | Mfr. Part # | AS5262-HMFP |
| Package | QFN-16-EP(6x6) | Model Number | AS5262-HMFP |
The AS5262 is a contactless magnetic angle position sensor designed for precise angular measurement over a full 360 turn. It offers a system-on-chip solution integrating Hall elements, analog front end, digital signal processing, and automotive-grade protection features. The device requires a simple two-pole magnet for angle measurement, providing instant absolute angle indication with a resolution of 0.022 (16384 positions per revolution). Its analog output is ratiometric to VDD, and it operates at a 5V supply voltage with robust overvoltage and reverse polarity protection.
| Parameter | Conditions | Min | Typ | Max | Units | Comments |
|---|---|---|---|---|---|---|
| Electrical Parameters | ||||||
| VDD DC supply voltage | -20 | 20 | V | No operation | ||
| VOUT Output voltage | -0.3 | 20 | V | Permanent | ||
| Vdiff Voltage difference at pin VDD and OUT | -20 | 20 | V | |||
| VDD3V3 DC supply voltage | -0.3 | 5 | V | |||
| Iscr Input current (latchup immunity) | -100 | 100 | mA | Norm: AEC-Q100-004 | ||
| ESD Electrostatic discharge | 2 | kV | Norm: AEC-Q100-002 | |||
| Temperature Ranges and Storage Conditions | ||||||
| TStrg Storage temperature | -55 | 150 | C | Min -67F; Max 302F | ||
| TBody Body temperature | 260 | C | Reflow peak soldering temperature | |||
| RHNC Relative humidity non-condensing | 5 | 85 | % | |||
| MSL Moisture Sensitivity Level | 3 | Max floor life time of 168h | ||||
| Operating Conditions | ||||||
| TAMB Ambient temperature | VDD = 4.5V to 5.5V (5V operation) | -40 | 150 | C | ||
| Isupp Supply current | Only for one die. Must be multiplied by 2 | 12 | mA | |||
| VDD Supply voltage | at pin VDD | 4.5 | 5.0 | 5.5 | V | |
| Magnetic Input Specification | ||||||
| Bpk Magnetic input field amplitude | Required vertical component of the magnetic field strength on the dies surface, measured along a concentric circle with a radius of 1.25 mm | 30 | 70 | mT | ||
| Bpkext Magnetic input field amplitude (extended) | default setting | 10 | 90 | mT | Increased sensor output noise. | |
| Boff Magnetic offset | Constant magnetic stray field | 5 | mT | |||
| Field non-linearity | Including offset gradient | 5 | % | |||
| Disp Displacement radius | Offset between defined device center and magnet axis. Dependent on the selected magnet. Including Eccentricity. | 1 | mm | |||
| Electrical System Specifications | ||||||
| RES Resolution | Analog Output Range > 90 | 12 bit | 1LSB=1.221mV typ | |||
| INLopt Integral non-linearity (optimum) | Best aligned reference magnet at 25C over full turn 360 | 0.5 | deg | |||
| INLtemp Integral non-linearity (optimum) | Best aligned reference magnet over temperature -40 to 150 over full turn 360 | 0.9 | deg | |||
| INL Integral non-linearity | Best aligned reference magnet over temperature -40 -150 over full turn 360 and displacement | 1.4 | deg | |||
| DNL Differential non-linearity | Monolitic | 0.05 | deg | |||
| ON Output noise (360 segment) | 1 LSB after filter peak/peak rms value | 0.2 | %/VDD | |||
| tPwrUp Power-up time | 0-5V | 10 | ms | See Figure 10 | ||
| tdelay System propagation delay | absolute output: delay of ADC, DSP and absolute interface | 300 | s | 10kOhm, 100 F RC filter | ||
| Timing Characteristics | ||||||
| TDETWD WachDog error detection time | 12 | ms | ||||
| Power Management - Supply Monitor | ||||||
| VDDUVTH VDD undervoltage upper threshold | 3.5 | 4.0 | 4.5 | V | ||
| VDDUVTL VDD undervoltage lower threshold | 3.0 | 3.5 | 4.0 | V | ||
| VDDUVHYS VDD undervoltage hysteresis | 300 | 500 | 900 | mV | ||
| VDDUVDET VDD undervoltage detection time | 10 | 50 | 250 | s | ||
| VDDUVREC VDD undervoltage recovery time | 10 | 50 | 250 | s | ||
| VDDOVTH VDD overvoltage upper threshold | 6.0 | 6.5 | 7.0 | V | ||
| VDDOVTL VDD overvoltage lower threshold | 5.5 | 6 | 6.5 | V | ||
| VDDOVHYS VDD overvoltage hysteresis | 300 | 500 | 900 | mV | ||
| ANATOVDET VDD overvoltage detection time (analog path) | 10 | 50 | 250 | s | ||
| ANATOVREC VDD overvoltage recovery time (analog path) | 10 | 50 | 250 | s | ||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa... Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa...
Get in touch with us
Leave a Message, we will call you back quickly!