| Standby Current | - |
| working temperature | -20℃~+70℃ |
| Current Range | 100A~4kA |
| Voltage - Supply | 24V |
| Sensitivity | - |
| Description | 100A~4kA Current Sensors RoHS |
| Mfr. Part # | 2904922 |
| Model Number | 2904922 |
View Detail Information
Explore similar products
High accuracy Allegro CT431-HSWF20MR current sensor with 16 lead SOIC wide
High precision current measurement system Isabellenhuette IVT-S-1K-U3-I-CAN1-12
current sensing ic Allegro ACS772LCB-050B-PFF-T with ultra loss and high voltage
Hall Effect Automotive Current Transducer LEM HC5F500-S with Open Loop Design
Product Specification
| Standby Current | - | working temperature | -20℃~+70℃ |
| Current Range | 100A~4kA | Voltage - Supply | 24V |
| Sensitivity | - | Description | 100A~4kA Current Sensors RoHS |
| Mfr. Part # | 2904922 | Model Number | 2904922 |
Set consisting of one 1 A measuring transducer and one Rogowski coil with signal line. The Rogowski coil measures the AC current of busbars and power lines. Features a 450 mm length and 140 mm diameter Rogowski coil with a 3 m signal line.
| Specification | Value |
|---|---|
| Dimensions (Width) | 22.5 mm |
| Dimensions (Height) | 85 mm |
| Dimensions (Depth) | 70.4 mm |
| Ambient Temperature (Operation - Measuring coil) | -30 C ... 80 C |
| Ambient Temperature (Operation - Measuring transducer) | -20 C ... 70 C |
| Ambient Temperature (Storage/Transport - Measuring coil) | -40 C ... 80 C |
| Ambient Temperature (Storage/Transport - Measuring transducer) | -25 C ... 85 C |
| Maximum Altitude | < 2000 m |
| Permissible Humidity (Operation) | 5 % ... 95 % (non-condensing) |
| Measuring Coil Degree of Protection | IP67 (not assessed by UL) |
| Measuring Transducer Degree of Protection | IP20 |
| Nominal Supply Voltage | 24 V DC -20 % ... +25 % |
| Nominal Supply Voltage Range | 19.2 V DC ... 30 V DC |
| Max. Current Consumption | 190 mA |
| Power Consumption | 4 W |
| Frequency Measuring Range | 40 Hz ... 20000 Hz |
| Position Error | < 1 % |
| Linearity Error (Measuring Coil) | 0.1 % |
| Measuring Ranges (Current) | 100 A, 250 A, 400 A, 630 A, 1000 A, 1500 A, 2000 A, 4000 A |
| Configurable/Programmable | Via DIP switches |
| Phase Angle | < 1 |
| Max. Distances for Copper Cables at PN | 32 m (0.75 mm (AWG 20)), 64 m (1.5 mm (AWG 16)), 107 m (2.5 mm (AWG 14)) |
| Input Signal (at 50 Hz) | 100 mV (1000 A) |
| Input Impedance | 27 k (smallest measuring range) |
| Output Signal (at 50 Hz) | 100 mV (no load, at 1,000 A) |
| Output Voltage (in no-load operation) | VOUT = M * dI/dt |
| Output Voltage (sinusoidal, in no-load operation) | 100 mV (VOUT = 2 * * M * f * I (M = 0.318 H; example: At 50 Hz; I = 1,000 A)) |
| Current Output Signal | 0 A AC ... 1 A |
| Rated Power | 1.5 VA |
| Load | 0 ... 1.5 |
| Length of Measuring Coil | 450 mm |
| Diameter of Measuring Coil | 8.3 mm 0.2 mm |
| Length of Signal Cable | 3000 mm |
| Conductor Structure Signal Line | 2x 0.22 mm (Signal (tinned)), 1x 0.22 mm (Shielding (tinned)) |
| Coil Material | Elastollan |
| Housing Material (Measuring Coil) | PC |
| Insulation | Double insulation |
| Rated Insulation Voltage | 1000 V AC (rms CAT III), 600 V AC (rms CAT IV) |
| Test Voltage (Measuring Coil) | 10.45 kV (DC / 1 min.) |
| Basic Accuracy (Measuring Coil) | < 0.21 % |
| Linearity Error (Measuring Transducer) | < 0.5 % (From the range end value) |
| Maximum Transmission Error | 0.5 % (From the range end value) |
| Frequency Range (Measuring Transducer) | 45 Hz ... 65 Hz |
| Max. Detectable Harmonics | < 2 kHz |
| Current Consumption (Measuring Transducer) | < 190 mA (at 19.2 V) |
| Housing Material (Measuring Transducer) | Polyamide |
| Test Voltage (Measuring Transducer) | 1.5 kV AC (Supply/input and output: 50 Hz, 1 min) |
| Operating Voltage Display | Green LED |
| Standards/Regulations | IEC 61010-1, IEC 61010-2-032 |
| Insulation (General) | Double insulation |
| Temperature Coefficients | 0.005 %/K (+10 C ... +70 C), 0.07 %/K (-20C ... +10C) |
| Connection Method (Measuring Transducer Side) | Screw connection |
| Stripping Length | 7 mm |
| Screw Thread | M3 |
| Conductor Cross Section (Solid) | 0.2 mm ... 2.5 mm |
| Conductor Cross Section (Flexible) | 0.2 mm ... 2.5 mm |
| Conductor Cross Section AWG | 24 ... 14 |
| Torque | 0.5 Nm ... 0.6 Nm |
| Pollution Degree | 2 |
| Overvoltage Category | III (1000 V, to neutral conductor), IV (600 V, to neutral conductor) |
| REACh SVHC | Lead 7439-92-1 |
| China RoHS | Environmentally Friendly Use Period = 50 years |
| eCl@ss | 10.0.1: 27210902, 11.0: 27210902, 4.0: 27210900, 4.1: 27210900, 5.0: 27210900, 5.1: 27210900, 6.0: 27210900, 7.0: 27210902, 9.0: 27210902 |
| ETIM | 3.0: EC002048, 4.0: EC002048, 5.0: EC002048, 6.0: EC002048, 7.0: EC002048 |
| UNSPSC | 13.2: 39121032, 18.0: 39121032, 19.0: 39121032, 20.0: 39121032, 21.0: 39121032 |
| Approvals | EAC Ex, EAC RU*DE*08.B.01187/19 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification:
Verified Supplier
Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa... Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa...
Get in touch with us
Leave a Message, we will call you back quickly!