| Resistance @ 25℃ | 10Ω |
| Power(Watts) | - |
| Pitch | 7.5mm |
| Operating Temperature | -40℃~+200℃ |
| B Constant (25℃/100℃) | - |
| Tolerance | ±20% |
| Steady State Current (Max) | 3A |
| Diameter (φD) | 11mm |
| Thermal Time Constant | 43s |
| B Constant (25℃/85℃) | - |
| B Constant (25℃/75℃) | - |
| B Constant Tolerance | - |
| B Constant (25℃/50℃) | - |
| Description | NTC Thermistor 10Ω Through Hole,P=7.5mm |
| Mfr. Part # | 206RV174 |
| Package | Through Hole,P=7.5mm |
| Model Number | 206RV174 |
View Detail Information
Explore similar products
Temperature Sensor NTC Thermistor KNSCHA 192NTC0010 with 4032 Chip Size and 3.0
Temperature Control Sensor Nanjing Shiheng Elec MF51B 104F3950 Glass Sealed NTC
NTC thermistor chip muRata NCP15XW222E03RC offering temperature measurement and
Power type NTC thermistor Nanjing Shiheng Elec MF72 2.5D13 featuring surge
Product Specification
| Resistance @ 25℃ | 10Ω | Power(Watts) | - |
| Pitch | 7.5mm | Operating Temperature | -40℃~+200℃ |
| B Constant (25℃/100℃) | - | Tolerance | ±20% |
| Steady State Current (Max) | 3A | Diameter (φD) | 11mm |
| Thermal Time Constant | 43s | B Constant (25℃/85℃) | - |
| B Constant (25℃/75℃) | - | B Constant Tolerance | - |
| B Constant (25℃/50℃) | - | Description | NTC Thermistor 10Ω Through Hole,P=7.5mm |
| Mfr. Part # | 206RV174 | Package | Through Hole,P=7.5mm |
| Model Number | 206RV174 |
The NTC 10D-11 is a Negative Temperature Coefficient (NTC) thermistor. Its resistance decreases as the ambient temperature increases. This thermistor is manufactured from 2 or 4 types of metal oxides (iron, nickel, cobalt, manganese, copper) that are shaped and sintered at high temperatures. It features a black coating and inward-bent leads for easy integration.
| Item | Specification Request | Test Conditions | Performance Requirements |
|---|---|---|---|
| Nominal Resistance (251) | 1020% | ||
| Max Steady State Current (25) | 3A | ||
| Thermal Time Constant (approx.) | 43S | ||
| Thermal Dissipation Constant (approx.) | 17mW | ||
| Operating Range | -40~+200 | ||
| Approximate Resistance Value at Maximum Current () | 0.275 | ||
| Max Shock Capacity (f/240V) | 330 | ||
| Zero Power Resistance | See Electrical Parameters | At 25, when the resistance change due to internal heating is negligible compared to the total measurement error. | |
| B-Value | See Electrical Parameters | Calculated using zero power resistance at 25 and 50. | |
| Thermal Dissipation Constant | See Electrical Parameters | Ratio of power dissipation change to corresponding temperature change at specified temperature. Unit: mW/. | |
| Thermal Time Constant | See Electrical Parameters | Under zero power condition, the time required for the thermistor's temperature to reach 63.2% of the difference between its initial and final temperatures when the temperature changes. | |
| Leads Terminal Tensile Strength | 1.0kg load applied to each terminal for 10 seconds. | No visible damage; Resistance change: 20% | |
| Leads Terminal Bend Strength | Fixed body, 0.5kg gravity on one terminal, bend 90, return, then bend 90 in opposite direction. | No visible damage; Resistance change: 20% | |
| Vibration | Frequency: 10~50Hz; Amplitude: 1.55mm; Direction and time: X, Y, Z axes each 2 hours. | No substantial damage. | |
| Solderability | Solder bath temperature: 2355; Time: 3S. | Covered termination: 98% | |
| Resistance to Soldering Heat | Dip leads in molten solder (35010) to a depth of 4.00.8mm for 3.00.5 seconds. Leave at room ambient for 24 hours before testing. | Resistance change: 10% | |
| Dry Heat (High Temperature Storage) | 1252 for 1000+48 hours. Leave at room ambient for 1-2 hours before testing. | Resistance change: 10% | |
| Cold (Low Temperature Storage) | -403 for 1000+48 hours. Leave at room ambient for 1-2 hours before testing. | Resistance change: 10% | |
| Humidity Test (Steady State) | 402, 95% RH, 1000 HR. | Resistance change: 10% | |
| Temperature Cycle Test | -40/30 25/5 +125/30 25/5. | Resistance change: 20% | |
| Operating Temperature | -40 to +200 | Allowable temperature range for long-term continuous operation. | |
| Storage Conditions | -10~40, RH 75% |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification:
Verified Supplier
Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa... Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa...
Get in touch with us
Leave a Message, we will call you back quickly!