Changsha Purple Horn E-Commerce Co., Ltd.
| Resistance @ 25℃ | 10Ω |
| Pitch | 5mm |
| Operating Temperature | -40℃~+160℃ |
| Tolerance | ±20% |
| Steady State Current (Max) | - |
| B Constant Tolerance | ±10% |
| B Constant (25℃/50℃) | - |
| Description | 10Ω ±20% ±10% Through Hole,P=5mm NTC Thermistors RoHS |
| Mfr. Part # | JF72100D7MB5250F |
| Package | Through Hole,P=5mm |
| Model Number | JF72100D7MB5250F |
View Detail Information
Explore similar products
Temperature Sensor NTC Thermistor KNSCHA 192NTC0010 with 4032 Chip Size and 3.0
Temperature Control Sensor Nanjing Shiheng Elec MF51B 104F3950 Glass Sealed NTC
NTC thermistor chip muRata NCP15XW222E03RC offering temperature measurement and
Power type NTC thermistor Nanjing Shiheng Elec MF72 2.5D13 featuring surge
Product Specification
| Resistance @ 25℃ | 10Ω | Pitch | 5mm |
| Operating Temperature | -40℃~+160℃ | Tolerance | ±20% |
| Steady State Current (Max) | - | B Constant Tolerance | ±10% |
| B Constant (25℃/50℃) | - | Description | 10Ω ±20% ±10% Through Hole,P=5mm NTC Thermistors RoHS |
| Mfr. Part # | JF72100D7MB5250F | Package | Through Hole,P=5mm |
| Model Number | JF72100D7MB5250F |
The JEW-3-048 C0 is an Inrush Current Limiting Negative Temperature Coefficient (NTC) Thermistor manufactured by Dongguan City Jiangkun (Jianerwei) Electronics Technology Co., Ltd. Designed for surge suppression, this component offers reliable performance in various electronic applications.
| Item | Symbol | Test Conditions | Parameter Standard | Unit | MF72 NTC 10D-7 F5*L25 |
| Zero Power Resistance at 25 | R25 | Ta=(250.01), Power0.01mw, Air Test | 1020% | 10 | |
| B Value | B25/50 | 260010% | K | 2600 | |
| Steady State Current | Imax | In still air at 252, with max steady state operating current applied | 1.2 | A | 1.2 |
| Dissipation Factor | Measured in still air at 252 | 10 | mw/ | 10 | |
| Time Constant | Measured in still air at 252 | 45 | Sec | 45 | |
| Withstand Voltage | 500VAC, 1min | No breakdown or flashover | No breakdown or flashover | ||
| Insulation Resistance | 500VDC, 1min | 500 | M | 500 | |
| Operating Temperature | -40~+160 | -40 to +160 | |||
| Max Allowable Capacitance | CT | 240VAC | 100 | uF | 100 |
| Test Item | Description | Performance Requirement |
| Durability at Room Temperature | Continuous application of max steady state current for 10005 hours at room temperature, followed by 12 hours recovery at 25. | R/R20%, no visible damage to appearance. |
| Resistance to Soldering Heat | Immersion of leads in 2605 tin liquid, 2mm from the body, for 51 Sec. | R/R20%, no visible damage to appearance. |
| Steady State Damp Heat | Storage at 402, 93+2/-3% RH for 504+24/-0 hours, followed by 1 hour in normal state. | R/R20%, no visible damage to appearance. |
| Lead Strength | Axial pull force applied to leads for 10Sec. (0.5mmd0.8mm: 10N; 0.8 mmd1.25mm: 20N) | No visible damage to appearance, R/R20%. |
| Rapid Temperature Change | 5 cycles of -40 (30min) -25 (5max) 150 (30min) -25 (5min). | R/R20%, no visible damage to appearance. |
| Maximum Allowable Capacitance | Application of maximum capacitance, intermittent closure for 50Ms, recovery for 5 times the duration, cycled 1000 times. | R/R20%, no visible damage to appearance. |
1. Soldering temperature should be less than 360, at least 2mm away from the body, and the time should be as short as possible.
2. When cutting leads, ensure the shortest lead length is 6mm.
1. Temperature: -10+40
2. Humidity: 75%RH
3. Term: 12 months (First-in/First-out)
4. Place: Avoid exposure to corrosive or deoxidizing gases, flammable and explosive gases, oil, water, chemical liquids, and direct sunlight, as these can lead to performance degradation or parameter drift.
5. Minimize opening of packages. Reseal immediately or store in a sealed container with a drying agent.
Do not use this component under the following conditions, as it may result in performance degradation, component destruction, or fire:
- Exceeding Imax.
- Exceeding the rated temperature range.
- Inferior thermal dissipation (which can cause localized overheating and damage).
Wave Soldering Curve: [Refer to diagram in source document]
Reflow Soldering Curve: [Refer to diagram in source document]
Soldering Iron Conditions:
- Temperature of soldering iron head: 360 (max)
- Soldering time: 3s (max)
- Solder head diameter: 3mm (max)
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa... Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa...
Get in touch with us
Leave a Message, we will call you back quickly!