Changsha Purple Horn E-Commerce Co., Ltd.
| Resistance @ 25℃ | 10Ω |
| Operating Temperature | -40℃~+150℃ |
| Pitch | 5mm |
| Tolerance | ±20% |
| Steady State Current (Max) | 700mA |
| Thermal Time Constant | 20s |
| B Constant Tolerance | ±10% |
| B Constant (25℃/50℃) | 2700K |
| Description | 10Ω ±20% 700mA ±10% 2700K Through Hole,P=5mm NTC Thermistors RoHS |
| Mfr. Part # | NTC 10D-5 |
| Package | Through Hole,P=5mm |
| Model Number | NTC 10D-5 |
View Detail Information
Explore similar products
Temperature Sensor NTC Thermistor KNSCHA 192NTC0010 with 4032 Chip Size and 3.0
Temperature Control Sensor Nanjing Shiheng Elec MF51B 104F3950 Glass Sealed NTC
NTC thermistor chip muRata NCP15XW222E03RC offering temperature measurement and
Power type NTC thermistor Nanjing Shiheng Elec MF72 2.5D13 featuring surge
Product Specification
| Resistance @ 25℃ | 10Ω | Operating Temperature | -40℃~+150℃ |
| Pitch | 5mm | Tolerance | ±20% |
| Steady State Current (Max) | 700mA | Thermal Time Constant | 20s |
| B Constant Tolerance | ±10% | B Constant (25℃/50℃) | 2700K |
| Description | 10Ω ±20% 700mA ±10% 2700K Through Hole,P=5mm NTC Thermistors RoHS | Mfr. Part # | NTC 10D-5 |
| Package | Through Hole,P=5mm | Model Number | NTC 10D-5 |
The NTC 10D-5/P=5 is a Power NTC Thermistor from Dongguan Chengxi Electronics Co., Ltd. It features a small size with high power capability for effective surge current suppression, fast response, high reliability, and a long lifespan. Its material offers a high B value and low residual resistance, making it suitable for a wide operating temperature range and diverse applications.
| Parameter | Specification | Test Conditions/Methods |
|---|---|---|
| Product Features | ||
| Surge Current Suppression | Small size, high power | Restrains surge current effectively |
| Performance | Fast response, high reliability, long life | Electronic characteristics |
| Material Constant (B Value) | High | Small residual resistance |
| Application Range | Wide | Integrated product series |
| Application Fields | ||
| Power Supplies & Adapters | Switch mode power supply, Adapter | |
| Lighting & Drivers | Transformer, LED driver circuit, Electronic rectifier, Electronic heater, Incandescent lamps and other lighting fixtures | Protection for filaments |
| Motors | Electric motor | |
| Displays | CRT, Display | Protection |
| Part Number Breakdown | ||
| Model | NTC 10D-5 M | NTC: Negative Temperature Coefficient, 10: Rated Zero-Power Resistance 10, D: Disk Shape, -5: Diameter 5mm, M: Tolerance 20% |
| Lead Shape | ||
| Type | Inner Bent (I Type) | Bulk, Straight, K Forming, Outer Bent (O Type), Y Type, Cutting Bending, Folded Lead (CL Type), Tower Straight |
| Shape & Dimensions | ||
| Shape | Disk | |
| Diameter | 5mm (-5) | 9mm (-9), 20mm (-20) |
| Dimensions (mm) | D:(max) 7.0, T:(max) 5.0, F:(0.5) 5.0, L:(min) 20.0, d:(0.1) 0.55 | For NTC 10D-5 |
| Technical Parameters | ||
| Rated Zero-Power Resistance (R25) | 10 20% | |
| Material Constant (B25/50) | 2700 10% | B=T1T2/( T2- T1) Ln (R1/R2) T1=298.15K(25), T2=323.15K(50) |
| Max. Steady State Current | 0.7 A | At 252 |
| Thermal Dissipation Constant () | 6 mW/ | Ratio of power dissipation change to temperature change |
| Thermal Time Constant () | 20 s | Time to reach 63.2% of temperature change under zero power |
| Operating Temperature Range | -40 ~ 150 | |
| Storage Conditions | ||
| Temperature | -10+40 | |
| Humidity | 70% RH | |
| Environment | Avoid corrosive/oxidizing gas, flammable/explosive gas, oil, water, chemical liquid, direct sunlight. Store in sealed container with desiccant. | |
| Mechanical Characteristics | ||
| Solder-ability | Terminals uniformly tinned, area 95% | Dipping in 240-245 tin bath for 2-3s (IEC68-2-20 /GB2423.28 Ta) |
| Resistance To Soldering Heat | No visible damage, R/RN 20% | Dipping in 2655 tin bath for 101s (IEC68-2-20 /GB2423.28 Tb) |
| Strength of Lead Terminal | No break out, R/RN 20% | Tensile 10N (10s), Bending 90 (5N, 10s), Torsion 180 (5N, 10s) (IEC68-2-21/GB2423.29 Ua / Ub) |
| Electrical Characteristics | ||
| Rated Zero-Power Resistance RN | 1020% | TA: 251, Voltage: 1.5VDC |
| Thermal Dissipation Constant | 6 MW/ | Calculated by power dissipation change vs temperature change |
| Thermal Time Constant | 20 S | Time to reach 63.2% of ambient temp change under zero power |
| Material Constant B | 270010% | Calculated using resistance at two temperatures |
| Max. Steady State Current | 0.7 A | At 252 |
| Reliability Test | ||
| Temperature Cycling | No visible damage, RN / RN 20% | Ta=-403 (30min), Tb=2003 (30min), 5 cycles |
| Electrical Cycling | No visible damage, RN / RN 20% | TA: 252, 1,000 cycles (1 min ON / 5 min OFF), Test Current: 0.7A |
| Load Life (Endurance) | No visible damage, RN / RN 20% | TA: 252, 0.7A, 1,00024 hours |
| Humidity Test | No visible damage, RN / RN 20% | TA: 402, RH: 933%, 100024 h |
| Marking | ||
| Code | NTC XD-Y | NTC: Negative Temperature Coefficient, X: Rated Zero-Power Resistance, D: Disk-Type, -Y: Max diameter of disk (mm) |
| Soldering Recommendation | ||
| Wave Soldering | (Profile not detailed) | |
| Soldering Iron Rework | Temperature: 360(max), Time: 3 sec (max), Distance from NTC: 2mm (min) | |
| Tape Size (Taped Style: Inner Bent) | ||
| Feed hole pitch (P0) | 12.7 1.0 mm | |
| Taping pitch (P) | 12.7 1.0 mm | |
| Lead spacing (F) | 5.0 1.0 mm | |
| Feed hole off alignment (P1) | 3.85 0.7 mm | |
| Lead crimp height (H) | 16.5 1.0 mm | |
| Bottom height (H1) | 29.0 max mm | |
| Carrier tape width (W) | 18.0 1.0 mm | |
| Adhesive tape width (W0) | 8.0 / 10.0 mm | |
| Feed hole height off alignment (W1) | 9.0 0.5 mm | |
| Adhesive tape thickness (W2) | 3.0 max mm | |
| Overall tape thickness (t) | 0.7 0.2 mm | |
| Feed hole diameter (D0) | 4.0 0.3 mm | |
| Wire lead diameter (d) | 0.55 / 0.6 / 0.7 mm | |
| Lead end protrusion (A) | 1.0 max mm | F Style figure2 |
| Body warp (P) | 0 0.2 mm | |
| Body inclination (h) | 2.0 max mm | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa... Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa...
Get in touch with us
Leave a Message, we will call you back quickly!