| Resistance @ 25℃ | 3Ω |
| Power(Watts) | - |
| Pitch | 10mm |
| Operating Temperature | -40℃~+200℃ |
| B Constant (25℃/100℃) | - |
| Tolerance | ±20% |
| Steady State Current (Max) | 8A |
| Diameter (φD) | 20mm |
| Thermal Time Constant | 1.88min |
| B Constant (25℃/85℃) | - |
| B Constant (25℃/75℃) | - |
| B Constant Tolerance | - |
| B Constant (25℃/50℃) | - |
| Description | NTC Thermistor 3Ω Through Hole,P=10mm |
| Mfr. Part # | 206RV188 |
| Package | Through Hole,P=10mm |
| Model Number | 206RV188 |
View Detail Information
Explore similar products
Temperature Sensor NTC Thermistor KNSCHA 192NTC0010 with 4032 Chip Size and 3.0
Temperature Control Sensor Nanjing Shiheng Elec MF51B 104F3950 Glass Sealed NTC
NTC thermistor chip muRata NCP15XW222E03RC offering temperature measurement and
Power type NTC thermistor Nanjing Shiheng Elec MF72 2.5D13 featuring surge
Product Specification
| Resistance @ 25℃ | 3Ω | Power(Watts) | - |
| Pitch | 10mm | Operating Temperature | -40℃~+200℃ |
| B Constant (25℃/100℃) | - | Tolerance | ±20% |
| Steady State Current (Max) | 8A | Diameter (φD) | 20mm |
| Thermal Time Constant | 1.88min | B Constant (25℃/85℃) | - |
| B Constant (25℃/75℃) | - | B Constant Tolerance | - |
| B Constant (25℃/50℃) | - | Description | NTC Thermistor 3Ω Through Hole,P=10mm |
| Mfr. Part # | 206RV188 | Package | Through Hole,P=10mm |
| Model Number | 206RV188 |
NTC Thermistor is a Negative Temperature Coefficient Resistor whose resistance changes with ambient temperature changes. Thermistor comprises 2 or 4 kinds of metal oxides of iron, nickel, cobalt, manganese and copper, being shaped and sintered at high temperature. It is a type of resistor whose resistance decreases as ambient temperature increases.
| Item | Specification Request | Test Conditions | Performance Requirements |
|---|---|---|---|
| Nominal Resistance (251) | 320% | ||
| Max Steady State Current (25) | 8A | ||
| Thermal Time Constant (approx.) | 113S | ||
| Thermal Dissipation Constant (approx.) | 28mW/ | ||
| Operating Range | -40~+200 | ||
| Approximate Resistance Value at Maximum Current | 0.055 | ||
| Max Shock Capacity | 1100 f/240V | ||
| Zero Power Resistance | See Electrical Parameters | At 25, when the resistance change caused by the internal heating of the resistor body can be ignored relative to the total measurement error. | See Electrical Parameters |
| B-Value | See Electrical Parameters | Calculated using the zero power resistance value at 25 and 50. | See Electrical Parameters |
| Thermal Dissipation Constant | See Electrical Parameters | The ratio of the change of the dissipation power to the corresponding change of the temperature at specified temperature. Unit: mw/ | See Electrical Parameters |
| Thermal Time Constant | See Electrical Parameters | Under zero power condition, the time required by a thermistor for its body temperature to reach 63.2% of the difference between its initial and final temperature. | See Electrical Parameters |
| Leads Terminal Tensile Strength | Apply a 1.0kg load to each lead terminal for 10 seconds. | No visible damage, Resistance change: 20% | |
| Leads Terminal Bend Strength | Fix the body, hang 0.5kg on one terminal, bend 90, then return, and bend 90 in the opposite direction. | No visible damage, Resistance change: 20% | |
| Vibration | Frequency: 10~50Hz, Amplitude: 1.55mm, Direction and time: X, Y, and Z axes for 2 hours each. | No substantial damage | |
| Solderability | Solder bath Temperature: 2355, Time: 3S | Covered termination: 98% | |
| Resistance to Soldering Heat | Dip the lead into molten solder of 35010 to a depth of 4.00.8mm for 3.00.5 seconds. After leaving at room ambient for 24 hours, measure resistance. | Resistance change: 10% | |
| Dry Heat (High Temperature Storage) | Subject to an ambient of 1252 for 1000+48 hours. After leaving at room ambient for 1 to 2 hours, measure resistance. | Resistance change: 10% | |
| Cold (Low Temperature Storage) | Subject to an ambient of -403 for 1000+48 hours. After leaving at room ambient for 1 to 2 hours, measure resistance. | Resistance change: 10% | |
| Humidity Test | 402, 95% RH, 1000HR | Resistance change: 10% | |
| Temperature Cycle Test | -40/30 25/5 +125/30 25/5 | Resistance change: 20% | |
| Operating Temperature | -40~+200 | Allowable temperature range while the thermistor works continuously for long time. | |
| Storage Conditions | -10~40 RH75% |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification:
Verified Supplier
Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa... Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa...
Get in touch with us
Leave a Message, we will call you back quickly!