Changsha Purple Horn E-Commerce Co., Ltd.
| Description | Through Hole,P=5mm NTC Thermistors RoHS |
| Mfr. Part # | CN0705MUS6BB4P5G |
| Package | Through Hole,P=5mm |
| Model Number | CN0705MUS6BB4P5G |
View Detail Information
Explore similar products
Temperature Sensor NTC Thermistor KNSCHA 192NTC0010 with 4032 Chip Size and 3.0
Temperature Control Sensor Nanjing Shiheng Elec MF51B 104F3950 Glass Sealed NTC
NTC thermistor chip muRata NCP15XW222E03RC offering temperature measurement and
Power type NTC thermistor Nanjing Shiheng Elec MF72 2.5D13 featuring surge
Product Specification
| Description | Through Hole,P=5mm NTC Thermistors RoHS | Mfr. Part # | CN0705MUS6BB4P5G |
| Package | Through Hole,P=5mm | Model Number | CN0705MUS6BB4P5G |
This product is a series of NTC thermistors designed for various applications. They offer a range of resistance values, precise tolerance, and reliable performance across a wide operating temperature range. Key features include good heat dissipation, thermal time constants, and maximum steady-state current capabilities. These thermistors are suitable for applications requiring accurate temperature sensing and control, with options for different lead configurations and packaging.
| Series | DMAX (mm) | TMAX (mm) | d0.05 (mm) | P0.5 (mm) | Hmax (mm) | L (mm) | Lead Type |
|---|---|---|---|---|---|---|---|
| CN05** | 6.5 | 5.0 | 0.6 | 5.0 | 12.5 | Cutting leads Or long leads | >18mm |
| CN07** | 8.5 | 5.0 | 0.6 | 5.0 | 14.5 | Cutting leads Or long leads | >18mm |
| CN09** | 10.5 | 5.5 | 0.6/0.8 | 5.0/7.5 | 16.5 | Cutting leads Or long leads | >18mm |
| CN10** | 12.5 | 5.5 | 0.6/0.8 | 5.0/7.5 | 18.5 | Cutting leads Or long leads | >18mm |
| CN13** | 14.5 | 6.0 | 0.8 | 7.5 | 20.5 | Cutting leads Or long leads | >18mm |
| CN15** | 16.5 | 6.5 | 0.8/1.0 | 7.5 | 22.5 | Cutting leads Or long leads | >18mm |
| CN20** | 22.5 | 7.0 | 0.8/1.0 | 7.5/10.0 | 28.5 | Cutting leads Or long leads | >18mm |
| Series | R25 () | Resistance Tolerance | (mW/C) | (s) | Imax (A) | Cmax (F) | B (K) 10% | Operating Temperature T (C) |
|---|---|---|---|---|---|---|---|---|
| CN0515M | 15.0 | 20% | ~6 | <22 | 0.6 | 47 | 3000 | -40~150 |
| CN0705M | 5.0 | 20% | ~10 | <30 | 2.0 | 100 | 2600 | -40~150 |
| CN0708M | 8.0 | 20% | ~10 | <30 | 1.0 | 100 | 2600 | -40~150 |
| CN0710M | 10.0 | 20% | ~10 | <30 | 1.0 | 100 | 2800 | -40~150 |
| CN0903M | 3.0 | 20% | ~11 | <38 | 4.0 | 220 | 2600 | -40~170 |
| CN0905M | 5.0 | 20% | ~11 | <38 | 3.0 | 220 | 2600 | -40~170 |
| CN0908M | 8.0 | 20% | ~11 | <38 | 2.0 | 220 | 2800 | -40~170 |
| CN0910M | 10.0 | 20% | ~11 | <38 | 2.0 | 220 | 2800 | -40~170 |
| CN1005M | 5.0 | 20% | ~13 | <50 | 4.0 | 330 | 2800 | -40~170 |
| CN1008M | 8.0 | 20% | ~13 | <50 | 3.0 | 330 | 2800 | -40~170 |
| CN1010M | 10.0 | 20% | ~13 | <50 | 3.0 | 330 | 2800 | -40~170 |
| CN1016M | 16.0 | 20% | ~13 | <50 | 2.0 | 330 | 2900 | -40~170 |
| CN1020M | 20.0 | 20% | ~13 | <50 | 2.0 | 330 | 3000 | -40~170 |
| CN134R7M | 4.7 | 20% | ~16 | <70 | 5.0 | 470 | 2800 | -40~170 |
| CN1305M | 5.0 | 20% | ~16 | <70 | 5.0 | 470 | 2800 | -40~170 |
| CN1308M | 8.0 | 20% | ~16 | <70 | 4.0 | 470 | 3000 | -40~170 |
| CN1310M | 10.0 | 20% | ~16 | <70 | 4.0 | 470 | 3000 | -40~170 |
| CN152R5M | 2.5 | 20% | ~20 | <85 | 7.0 | 680 | 2800 | -40~200 |
| CN1503M | 3.0 | 20% | ~20 | <85 | 7.0 | 680 | 2800 | -40~200 |
| CN153R3M | 3.3 | 20% | ~20 | <85 | 7.0 | 680 | 2900 | -40~200 |
| CN1505M | 5.0 | 20% | ~20 | <85 | 6.0 | 680 | 3000 | -40~200 |
| CN1510M | 10.0 | 20% | ~20 | <85 | 5.0 | 680 | 3200 | -40~200 |
| CN1515M | 15.0 | 20% | ~20 | <85 | 4.0 | 680 | 3200 | -40~200 |
| CN1520M | 20.0 | 20% | ~20 | <85 | 4.0 | 680 | 3200 | -40~200 |
| CN2005M | 5.0 | 20% | ~26 | <110 | 7.0 | 1000 | 3000 | -40~200 |
| CN2010M | 10.0 | 20% | ~26 | <110 | 6.0 | 1000 | 3200 | -40~200 |
| Item | Requirement | Test Method |
|---|---|---|
| Solder-ability | Even tinning on the wetted part, Tinning area 95% | Dip lead out end with flux, immerse in tin bath at 2455, depth 15mm, tin surface 6mm from NTC body lower end, for 3 0.5 seconds. (Refer to IEC68-2-20 /GB2423.28 Test Ta) |
| Resistance To Soldering Heat | No visible damage, R/RN 20% (R =RN-RN') | Test according to IEC68-2-20 (GB2423.28) Test Tb. Using welding groove method, dip lead out end with flux and immerse in tin groove at 260 5, depth 15mm, tin surface 6mm from NTC body lower end, maintain for 10 1 second. Recover at 251 for 4-5h, then retest rated zero power resistance RN'. |
| Strength of lead terminal | No visible damage, R/RN 20% (R =RN-RN') | Test according to IEC68-2-21 (GB2423.29) Test U. Test Ua: tensile force 10N for 10 seconds; Test Ub: Bend 90, pull 10N for 10 seconds; Twist 180, pull 5N for 10 seconds. Recover at 251 for 4-5h, then retest rated zero power resistance RN'. |
| Temp. Cycling Testing | No visible damage, R/RN 20% (R =RN-RN') | Store for 30 mins each at Ta=-402 and Tb=1502, cycle 5 times. Each cycle has a 5-minute transition at 251. After testing, place at room temperature (251) for 4-5 hours before measuring zero power resistance RN'. |
| Electrical Cycling Testing | No visible damage, R/RN 20% (R =RN-RN') | Environmental temperature: 251. Cycle count: 1000 times, on/off: 5 s / 55 s, test current: 5.0A. After placing the sample at room temperature (251) for 4-5 hours, measure its zero power resistance RN'. |
| LoadLife (Endurance) Testing | No visible damage, R/RN 20% (R =RN-RN') | Environmental temperature: 251. Apply maximum working current of 5.0A for 100024 hours. After testing, place at room temperature (251) for 4-5 hours, then measure zero power resistance RN'. |
| Humidity Testing | No visible damage, R/RN 20% (R =RN-RN') | Place in an environment of 402 and 933% RH for 20024 hours. After taking out, place at room temperature (251) for 1-2 hours to measure zero power resistance RN'. |
| Insulation Withstand voltage | 700VDC, No breakdown or arcing during the test | Take the lead end as one electrode, wrap the other electrode with metal foil around the thermistor body. Apply 700VDC to both electrodes for 60 seconds. |
| Item | Units | Definition |
|---|---|---|
| Zero power resistor R25 | DC resistance value measured at 251. Self-heating effects on resistance are negligible relative to total measurement error. | |
| Resistance tolerance | % | Maximum allowable deviation of actual resistance from nominal value. |
| Thermal dissipation coefficient | mW/C | Power consumed to raise thermistor temperature by 1. Ratio of power consumption change to temperature change. |
| Thermal time constant | s | Time for thermistor temperature to drop to 63.2% of initial-final difference under zero power conditions. |
| Maximum steady-state current Imax | A | Maximum continuous current applicable at 25 ambient temperature. |
| Maximum impulse capacitance Cmax | F | Maximum allowable capacitance of a capacitor connected to the thermistor under load. |
| Material Constant B | K | Represents material constant for NTC thermistors using the formula: B=T1T2/(T2-T1)ln (R1/R2) or B=2.303[T1T2/(T2-T1)]log (R1/R2), where T1=298.15K(25C), T2 = 323.15K(50C). |
| Working temperature range | Continuous operating temperature range for the thermistor in zero power state. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa... Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa...
Get in touch with us
Leave a Message, we will call you back quickly!