High precision micro thermal mass flow sensor Aosong AFM0200 designed for small

Product Specification

Product Overview

The AFM0200 is a micro thermal mass flow sensor specifically developed for precise measurement of small gas flows. Utilizing an independently developed MEMS mass flow chip, it accurately calculates gas mass flow by measuring resistance changes. This sensor offers intuitive readings, high precision, stability, resistance to extreme temperatures, good linearity, and fast response times. With built-in temperature compensation and a compact design, the AFM0200 is ideal for various applications requiring gas flow measurement, including gas detectors, air samplers, sweep and cooling flow management in wire bonding machines, and confirmation of adsorption for micro electronic and optical components. It undergoes rigorous factory calibration, providing direct flow output to reduce user costs and development complexity.

Product Attributes

• Brand: ASAIR ( Guangzhou Aosong Electronics Co., Ltd.)
• Origin: China
• Housing Material: PPS+GF40%
• Air Duct Material: PPS+GF40%
• Interface Type: 3P Terminal, 1.0mm pin pitch
• Cable: 3P Cable (standard configuration)

Technical Specifications

Product Dimensions

(Image reference: Figure 3. AFM0200 Dimensions Diagram (Unit: mm))

Product Output

4.1 Voltage Output

The AFM0200 features analog voltage output. The relationship between voltage and flow is as follows:

Formula: X = Voltage (V), Y = Liters per minute (slm)

Voltage to Flow Conversion:

• Positive: If output voltage is 3V and 4.5V, use formula: Y=(X-3) / 2.5. Otherwise, use formula: Y=(X-4.5)* 4.8 + 0.6
• Reverse: If output voltage is 1.5V and 3V, use formula: Y=(X-3) / 2.5. Otherwise, use formula: Y=(X-1.5)* 4.8 - 0.6

(Image reference: Figure 4. Flow-Voltage Output Curve)

Warnings and Personal Injury

Do not apply this product to safety protection devices, emergency stop equipment, or any other application where product failure could result in personal injury, unless specifically intended or authorized. Refer to the product datasheet and application guide before installation, handling, use, or maintenance. Failure to comply with this advice may result in death or serious personal injury, for which the company will not bear any compensation and will be exempt from any claims, including costs, damages, and legal fees, from company management, employees, affiliated agents, and distributors.

Quality Assurance

Guangzhou Aosong Electronics Co., Ltd. provides a quality guarantee for its products to direct purchasers, starting from the date of product inspection, based on the technical specifications in the company's published product datasheet.

• Warranty Period:
• AFM0200 Micro Flow Sensor: 12 months
• Cable: 6 months

If a product is found to have a quality defect within the warranty period, the company will provide free repair or replacement. The company is responsible only for defects arising in applications that meet the product's technical conditions. No guarantee or warranty is provided for product applications in special or non-recommended scenarios. Furthermore, no commitment is made regarding the reliability of the product when used with non-company-provided accessories or circuits.

This manual is subject to change without prior notice. The final interpretation rights of this product belong to Guangzhou Aosong Electronics Co., Ltd.

Copyright 2022, ASAIR