Changsha Purple Horn E-Commerce Co., Ltd.
| Current - Collector(Ic) | 3mA |
| Collector - Emitter Voltage VCEO | 30V |
| Current - Dark(Id) | 100nA |
| Peak Wavelength | 940nm |
| Viewing Angle | - |
| Operating Temperature | -25℃~+85℃ |
| Description | 3mA 30V 100nA 940nm Through Hole,D=3mm Phototransistors RoHS |
| Mfr. Part # | MHL324PT03CRT |
| Package | Through Hole,D=3mm |
| Model Number | MHL324PT03CRT |
View Detail Information
Explore similar products
Industrial sensor Chau Light ZSPTP68C designed to improve automation precision
Chau Light ZSPT868B-F14H device ideal for integration into complex industrial
measurement sensor Chau Light ZPD034B suitable for integration in various
Precision measurement device Chau Light ZSPT-1608B-08-Z3 optimized for
Product Specification
| Current - Collector(Ic) | 3mA | Collector - Emitter Voltage VCEO | 30V |
| Current - Dark(Id) | 100nA | Peak Wavelength | 940nm |
| Viewing Angle | - | Operating Temperature | -25℃~+85℃ |
| Description | 3mA 30V 100nA 940nm Through Hole,D=3mm Phototransistors RoHS | Mfr. Part # | MHL324PT03CRT |
| Package | Through Hole,D=3mm | Model Number | MHL324PT03CRT |
The Lianyungang Meihua Electronics Technology Co.,Ltd MHL324PT03CRT is a 3mm diameter LED lamp designed for infrared reception. It features a wide range of collector currents, high-speed response, high output power, and is lensed for high sensitivity. This Pb-free product is constructed with silicon chips and a water-clear lens, making it suitable for various industrial applications.
| Parameter | Symbol | Test Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Absolute Maximum Ratings (Ta=25) | ||||||
| Power Dissipation Per Segment | PAD | 10 | mW | |||
| Reverse Voltage | VR | 30 | V | |||
| Operating Temperature Range | TOPR | -25 | 85 | |||
| Storage Temperature Range | TSTG | -25 | 85 | |||
| Optical-Electrical Characteristic (Ta=25) | ||||||
| Collector-Emitter Breakdown Voltage | BVCEO | Ic = 100 uA, Ee = 0 mw/cm | 30 | V | ||
| Emitter-Collector Breakdown Voltage | BVCEO | Ic = 100 uA, Ee = 0 mw/cm | 5 | V | ||
| Collector Dark Current | ICEO | VCE=10V, Ee=0 mw/cm | 100 | nA | ||
| Collector Dark Current | ICEO | VCE=5V, Ee=0 mw/cm | 0.2 | uA | ||
| Collector-Emitter Saturation Voltage | VCE(S) | Ic = 2mA, Ee=0.5mw/cm | 0.4 | V | ||
| Rise / Fall Time | TR/TF | VCE=5V, IC=1mA, RL=1000 | 15/15 | uS | ||
| On Stat Collector Current | IC | VCE=5V, Ee=0.1mw/cm | 3 | mA | ||
| Peak Sensitivity Wavelength | P | 940 | nm | |||
| BIN Requirements | ||||||
| Collector-Emitter Breakdown Voltage | Vceo | Ee=0,Ic=100A,5ms | >30 | V | ||
| Emitter-Collector Breakdown Voltage | Veco | Ee=0,Ie=100A,5ms | >5 | V | ||
| Collector-Emitter Dark Leakage Current | Iceo | Ee=0,Vce=10V,5ms | 0.1 | A | ||
| Collector-Emitter Dark Leakage Current | Iceo | Ee=0,Vce=5V,5ms | 0.2 | A | ||
| Collector Current (Ee=0.1mw/cm, Vce=5V) | Ic,A | 0.1-0.6 | mA | |||
| Collector Current (Ee=0.1mw/cm, Vce=5V) | Ic,B | 0.6-1.6 | mA | |||
| Collector Current (Ee=0.1mw/cm, Vce=5V) | Ic,C | 1.6-2.6 | mA | |||
| Collector Current (Ee=0.1mw/cm, Vce=5V) | Ic,D | 2.6-3.6 | mA | |||
| Collector Current (Ee=0.1mw/cm, Vce=5V) | Ic,E | 3.6-4.6 | mA | |||
| Method | Conditions | Remark |
|---|---|---|
| DIP Soldering | Bath temperature: 260 max, Immersion time: within 5 sec, 1 time | Solder no closer than 2mm from the base of the package. Using soldering flux, RESIN FLUX is recommended. |
| Soldering Iron | Soldering iron: 30W or smaller, Temperature at tip of iron: 300 or lower, Soldering time: within 3 sec. | During soldering, take care not to press the tip of iron against the PIN (To prevent heat from being transferred directly to the PIN.) |
Store in an environment with temperature below 30 and humidity below 70% RH for up to 3 months. Avoid environments with corrosive gases that may cause oxidation, loss of luster, or discoloration of the lead frames, which can lead to soldering difficulties. Prevent rapid transitions in ambient temperature, especially in high humidity environments where condensation can occur.
Observe absolute maximum ratings and usage instructions. Meihua assumes no responsibility for damage resulting from non-compliance. The product is sensitive to electrostatic discharge (ESD); use grounded wrist straps, ESD footwear, clothing, floors, and workstation equipment. Ensure proper grounding for all devices, equipment, and machinery. Consider surge protection in product design. LEDs should be operated with forward bias; the driving circuit must prevent forward or reverse voltage when the LED is off to avoid damage.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa... Changsha Purple Horn E-Commerce Co., Ltd.. is a professional company focus on integrated circuit ic business. Purple Horn will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Founded in 2009, Our compa...
Get in touch with us
Leave a Message, we will call you back quickly!