Payment Terms | T/T |
Supply Ability | 1 |
Delivery Time | 5-8 work daysRockwell Automation |
Packaging Details | New in original boxRockwell Automation |
Condition | new |
Current Required | 1.0 Amp |
Voltage input | 5 Volts DC |
warranty | 1 year |
Type of Memory Storage | 0.2milliseconds per 1K of logic |
Power requirements | 67 milliamps from +5 VDC supply |
User Memory | 240K Bytes |
Product type | CPU module |
Brand Name | GE |
Model Number | IC697CPU732 |
Place of Origin | USA |
View Detail Information
Explore similar products
1746-NR4 AB Analog Input Module 500 Volts/1 minute SLC 500 RTD/Resistance
GE FANUC 90-30 PLC Dc Output Module IC693ALG392 240VAC
3BSE038226R1 SS823 Power Supplies Module 800xA System 24V 20A
CI858K01 3BSE018135R1 DriveBus Interface Communication Analog I O Module
Product Specification
Payment Terms | T/T | Supply Ability | 1 |
Delivery Time | 5-8 work daysRockwell Automation | Packaging Details | New in original boxRockwell Automation |
Condition | new | Current Required | 1.0 Amp |
Voltage input | 5 Volts DC | warranty | 1 year |
Type of Memory Storage | 0.2milliseconds per 1K of logic | Power requirements | 67 milliamps from +5 VDC supply |
User Memory | 240K Bytes | Product type | CPU module |
Brand Name | GE | Model Number | IC697CPU732 |
Place of Origin | USA |
GE IC697CPU732 CPU MODULE 12MHZ 2K DISCRETE I/O EXPANDABLE MEM FLT PT
Product information GE IC697CPU732:
The IC697CPU732 supports IC697 LAN interface modules, IC697 discrete and analog I/O modules, multiple coprocessor and communications modules, I/O Link Interface modules, and bus controllers for IC66* modules. Configuration of this device is accomplished by connecting the module to a programmer computer and running IC641 programming software.
DIP switches and jumpers are not used in the configuration of this product. For security, configuration settings are password protected. User memory, programming data, the calendar, and the clock are maintained by a lithium CMOS battery.
This device supports an 8-wire serial multidrop configuration. The number of programmable controllers allowed in this configuration is determined by cable length. A 24 AWG 30V serial cable should be used in this setup to connect the controller to a computer. Warning: Terminal strips or alternate connectors should not be used in the transmission line for a multidrop configuration.
To operate the IC697CPU732, use either the three-position switch or an attached computer running IC641 programming software.Refer to the product manual for proper installation instructions. Turn off power before connecting the device. Place the three-position operation switch in the STOP position. Place the battery in one of the battery connection slots. Connect the device to slot 1. Power on the device.
More information:
Configuration The IC697 CPU and I/O system is configured with IC641 programming software. There are no DIP switches or jumpers used to configure the system.
The CPU verifies the actual module and rack configuration at power-up and periodically during operation. The actual configuration must be the same as the programmed configuration. Deviations are reported to the CPU alarm processor function for configured fault response
IC697CPU732 's Features:
Supports floating point calculations.
Single slot CPU.
512 inputs and outputs (any mix).
Up to 8K analog I/O. 0.4 microseconds per boolean function.
12 MHz, 80C186 microprocessor.
Supports IC66* and IC697 I/O.
Programmed by IC641 software products.
Configurable data and program memory.
Battery-backed calendar clock.
Three position operation mode switch.
Password controlled access.
Three status LEDs.
IC697CPU732 's details:
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
Company Details
Business Type:
Distributor/Wholesaler,Trading Company,Seller
Year Established:
2009
Total Annual:
100000-200000
Employee Number:
15~30
Ecer Certification:
Active Member
Wisdomlong Technology CO.,LTD locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic convicti... Wisdomlong Technology CO.,LTD locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic convicti...
Get in touch with us
Leave a Message, we will call you back quickly!