GE FANUC IC693CHS397 SERIES 90-30 PROGRAMMABLE LOGIC CONTROLLER (PLC)

Product Specification

GE FANUC IC693CHS397 SERIES 90-30 PROGRAMMABLE LOGIC CONTROLLER (PLC)

Technical Specifications for IC693CHS397

Manufacturer GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc (Former); Emerson Automation (Current)
No. of CPU slots One (1)
Series Series 90-30
Part Number IC693CHS397
No. of Power supply slots One (1)
Product Description 5-slot CPU baseplate
Product Type CPU Baseplate
Slot assignment CPU / Specialty module: Slot 1 I/O module / Option modules: Slot 2-5 Unnumbered slot: Power supply module

Expansion cable: Expansion cable
Number of Slots 5
No. of I/O slots Four (4)
Default rack address Rack number 0
Number of I/O Slots Four (4)
Number of permitted CPU baseplate per system: One (1)
Slot 1 assignment CPU / Specialty modules
Mounting Panel Mounting

Slot 2 - 5 assignment I/O modules / Option modules
I/O Expansion Bus Connector 1
P/S Slot Power Supply Module
Current load: 270 mA
Installation Rack Rack 0
Bus voltage: +5VDC
Expansion Connector Type 25-Pine D-Type Female Connector
Expansion slot 25-pin D-shell female connector

Expansion and Remote Baseplates Supported
Maximum expansion cable length 50 feet or 15 meters
Product Lifecycle Status* Discontinued/Obsolete
Expansion baseplate Supported
Dimensions 10.43 x 5.12 x 5.59 in
Mounting Panel mounting
Internal Power consumption 270 mA at 5 VDC
Product Lifecycle Discontinued

 

 

About IC693CHS397

The IC693CHS397 is a 5-slot baseplate from the Series 90-30 Programmable Logic Controller (PLC) family. During the product

series active lifecycle, this hardware was part of GE Fanuc Automation however, the PLC series and other products were recently

acquired by Emerson Automation. The IC693CHS397 has a total of Five (5) slots and another uncounted slot that is dedicated

to the power supply module. This baseplate has One (1) slot dedicated to the Central Processing Unit (CPU) or specialty

modules, Four (4) slots assigned for I/O, and option modules. It is also provided with an expansion slot located on the

rightmost side of the hardware which can be used for rack extension. Only One (1) CPU is allowed to be installed on this

baseplate. Additionally, the same slot for the CPU (Slot 1) is also designed compatibly with communication modules such as a

FIP Remote I/O scanner and similar modules. Slot 2 and other I/O slots come in a unique size that does not fit any other

modules. This provides connection safety and prevents damage to other modules during installation. The provided baseplate

expansion port is a 25-pin D-shell, female connector mounted on the rightmost side of the hardware. When connecting an

expansion cable or implementing multiple expansion baseplates, ensure that the total length of the cable shall not exceed 50

feet or 15 meters. The IC693CHS397 is designed for panel mounting through the provided mounting tabs. This hardware

measures 10.43 x 5.12 x 5.59 in. (W x H x D) with an internal power consumption of 270 mA at 5 VDC.

The GE Fanuc IC693CHS397 5-slot baseplate from GE Fanuc Series 90-30 and it is made to host modular CPUs or Central

Processing Units, I/O and specialty modules. The IC693CHS397 baseplate has 5 slots for installing a variety of CPUs and other

devices that make up a complete PLC or programmable logic controller. Technically, the GE Fanuc IC693CHS397 baseplate has 6

slots total, not just 5, but the first slot on the left is not numbered because it is always and only used for hosting power supply

modules. This power supply slot is a different size and shape than the 5 slots that are numbered, and its size and shape can

only accommodate a power supply and nothing else.

The 5 main slots in the GE Fanuc Series 90-30 IC693CHS397 5-slot CPU baseplate include 1 CPU slot which gives the baseplate

its name and 4 non-CPU slots that can host I/O modules. There is also an I/O expansion bus connector at the far right edge of

the IC693CHS397 baseplate that can be used to expand the I/O communication capabilities of the baseplate beyond what the

4 I/O slots can handle. Expansion baseplates and remote baseplates can be connected to the IC693CHS397 CPU baseplate as

part of a larger PLC system, but a PLC can only have 1 CPU baseplate in it. The CPU baseplate is always installed in rack

number 0 in the PLC system. Because the IC693CHS397 CPU baseplate supports a modular CPU, it is easy to replace or

upgrade the CPU module when necessary.

 

 

 

 

Terms

1. We ships worldwide and accepts T/T and Paypal.
2. All items are subject to availability and passing our QA testing and inspection.
3. Turnaround Time:
Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee.

Shipping

1. We ship worldwid use UPS, FedEx, DHL, or Truck when needed.
2. Call to use a shipping service other than the ones listed.
3. International Customers are responsible for all Customs fees, VAT, and other fees applied by their respective countries.

FAQ