Shenzhen Olinkcom Technology Co.,Ltd
| Payment Terms | T/T or Net 30 days |
| Supply Ability | 80-120k per month |
| Delivery Time | 3-5 working days |
| Packaging Details | Individual package Or 10pcs/pallet Or 20pcs/pallet |
| Data Rate | 11.3Gb/s bit rates |
| Form Factor | SFP+ |
| Compatibility | Brocade |
| Connector | LC duplex |
| Wavelength | 1310nm |
| Distance | 10km |
| Receiver Type | PIN |
| Transmitter Type | DFB |
| DDM/DOM | Supported |
| Media | SMF |
| Temperature | 0~70 °C |
| Warranty | 3 years |
| Brand Name | OLKOPTO |
| Model Number | OLSP311XL-CD10 |
| Certification | RoHS FCC CE GS UL FDA etc |
| Place of Origin | Shenzhen China |
View Detail Information
Explore similar products
Cisco Compatible 10G SFP+ 1310nm 40km DOM LC SMF Fiber Optic Transceiver
SFP-10G-ER40 Compatible Arista Networks 10G SFP+ 1310nm 40km Transceiver
Juniper Networks EX-SFP-10GE-ER40 1310nm 40km DOM LC SMF 10G sFP+ Transceiver
10G-ER SFP+ 1310nm 40km LC SMF SFP Transceiver Module Compatible Brocade 10G
Product Specification
| Payment Terms | T/T or Net 30 days | Supply Ability | 80-120k per month |
| Delivery Time | 3-5 working days | Packaging Details | Individual package Or 10pcs/pallet Or 20pcs/pallet |
| Data Rate | 11.3Gb/s bit rates | Form Factor | SFP+ |
| Compatibility | Brocade | Connector | LC duplex |
| Wavelength | 1310nm | Distance | 10km |
| Receiver Type | PIN | Transmitter Type | DFB |
| DDM/DOM | Supported | Media | SMF |
| Temperature | 0~70 °C | Warranty | 3 years |
| Brand Name | OLKOPTO | Model Number | OLSP311XL-CD10 |
| Certification | RoHS FCC CE GS UL FDA etc | Place of Origin | Shenzhen China |
| High Light | 10km SFP+ 10G Transceiver ，SMF 10G Transceiver ，1310nm 10gbe sfp+ | ||
Brocade Compatible SFP+ 10G Transceiver SMF 10km 1310nm LC Duplex
10G-LR SFP+ 1310nm 10km DOM LC SMF Brocade Compatible 10GBase Transceiver
Product Descriptions
The Olinkcom's OLSP311XL-CD10 modules give you a wide variety of Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Unit | Note |
| Supply Voltage | Vcc | -0.5 | 4.0 | V | |
| Storage Temperature | TS | -40 | 85 | °C | |
| Relative Humidity | RH | 0 | 85 | % |
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Differential data input swing | VINPP | 180 | 700 | mVpp | 1 | |
| Transmit Disable Voltage | VD | VCC-0.8 | Vcc | V | ||
| Transmit Enable Voltage | VEN | Vee | Vee+0.8 | |||
| Input differential impedance | Rin | 100 | Ω | |||
| Receiver | ||||||
| Differential data output swing | Vout,pp | 300 | 850 | mVpp | 2 | |
| Output rise time and fall time | Tr, Tf | 28 | Ps | 3 | ||
| LOS asserted | VLOS_F | VCC-0.8 | Vcc | V | 4 | |
| LOS de-asserted | VLOS_N | Vee | Vee+0.8 | V | 4 | |
Note:
1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Into 100Ω differential termination.
3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.
4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.
Product Features
● Supports 11.3Gb/s bit rates
● Duplex LC connector
● Hot pluggable SFP+ footprint
● Uncooled 1310nm DFB transmitter, PIN photo-detector
● Applicable for 10km SMF connection
● Low power consumption, < 1W
● Digital Diagnostic Monitor Interface
● Optical interface compliant to IEEE 802.3ae 10GBASE-LR
● Electrical interface compliant to SFF-8431
● Operating case temperature: Commerical:0 to 70 °C
Applications
● 10GBASE-LR/LW at 10.3125Gbps and 10G Fiber Channel
● CPRI and OBSAI
● Other optical links
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Operating Wavelength | λ | 1290 | 1310 | 1330 | nm | |
| Ave. output power (Enabled) | PAVE | -6 | 0 | dBm | 1 | |
| Side-Mode Suppression Ratio | SMSR | 30 | dB | |||
| Extinction Ratio | ER | 4 | 4.5 | dB | ||
| RMS spectral width | Δλ | 1 | nm | |||
| Rise/Fall time (20%~80%) | Tr/Tf | 50 | ps | |||
| Dispersion penalty | TDP | 3.2 | dB | |||
| Relative Intensity Noise | RIN | -128 | dB/Hz | |||
| Output Optical Eye | Compliant with IEEE 0802.3ae | |||||
| Receiver | ||||||
| Operating Wavelength | 1270 | 1600 | nm | |||
| Receiver Sensitivity | PSEN2 | -14.4 | dBm | 2 | ||
| Overload | PAVE | 0.5 | dBm | |||
| LOS Assert | Pa | -30 | dBm | |||
| LOS De-assert | Pd | -18 | dBm | |||
| LOS Hysteresis | Pd-Pa | 0.5 | dB | |||
Notes:
1. Average power figures are informative only, per IEEE 802.3ae.
2. Measured at the BER less than 1E-12, back to back. The measure pattern is PRBS 231-1 with worst ER=4.5@ 10.3125Gb/s.
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
25000000-28000000
Employee Number:
150~300
Ecer Certification：
Verified Supplier
Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able ... Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able ...
Get in touch with us
Leave a Message, we will call you back quickly!