Payment Terms | L/C, T/T, Western Union, MoneyGram |
Supply Ability | 50000PCS/MONTH |
Delivery Time | 20-45DAYS |
Packaging Details | carton,pallet |
Type | Sprag Freewheel Clutch Bearing |
Outer dia | 85-630 mm |
Material | Chrome steel |
Torque capacity | 950Nm |
Precision Rating | P0 |
WEIGHT | 0.45 Kg |
Brand Name | SFT |
Model Number | B-205 |
Place of Origin | China |
View Detail Information
Explore similar products
CSK40PP Chrome Steel Conveyors One Way Bearings For Textile Machinery
DC5476 Low Noise Sprag One Way Clutch Bearings Gearbox Bearing SFT
One Way Clutch Bearings CKA3585 Sprag Clutch Bearing For Textile Equipment
Freewheel One Way Gcr15 Clutch Bearing For Mining Machinery
Product Specification
Payment Terms | L/C, T/T, Western Union, MoneyGram | Supply Ability | 50000PCS/MONTH |
Delivery Time | 20-45DAYS | Packaging Details | carton,pallet |
Type | Sprag Freewheel Clutch Bearing | Outer dia | 85-630 mm |
Material | Chrome steel | Torque capacity | 950Nm |
Precision Rating | P0 | WEIGHT | 0.45 Kg |
Brand Name | SFT | Model Number | B-205 |
Place of Origin | China | ||
High Light | S200 Freewheel Clutch Bearing ,B200 Freewheel Clutch Bearing ,B205 one way sprag clutch bearing |
Description of One Way Bearing Sprag Freewheel Clutch Bearing B205
Feature of Freewheel Clutch Bearing
Type S200 B200 Freewheel Clutch Bearing is a non bearing supported sprag type freewheel. The sprags run directly on the shaft provided by the user. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation.
A typical arrangement is to install this type alongside a bearing as shown on the following page. The housing bore to receive the outer race will be machined with a H7 tolerance. A key will transmit the torque. The shaft on which the sprags run must have a surface hardness of HRc 60 to 62 for a finished depth of 0,6 mm minimum. Core hardness should be HRc 35 to 45. Surface roughness must not exceed 22 CLA. Maximum shaft taper 0,01 mm per 50 mm length.Concentricity between shaft and housing
bore should be maintained within TIR 0,05 mm.
The preferred lubrication is oil. The Stieber design allows the use of most of the common lubricants used in power transmission including gear oils with EP additives. When necessary grease lubrication is also possible.
Dimensions and Capacities of Freewheel Clutch Bearing :
Model | Torque Capacity (N.m) | Drag Torque (N.m) | Max .Overrunning (r/min) | Max.Idexing (cycle/min) | A(+0 to -0.6) |
B |
Keyway | With JIS Bearing No. | Shaft Dia. C(+0 to -0.025) | Weight (kg) | |
Shaft | Outer Race | ||||||||||
B203 | 39.2 | 0.10 | 2400 | 500 | 150 | 25.0 | 40(-0.014-0.039) | 4X2.5 | 6203 | 16.510 | 0.23 |
B204 | 58.8 | 0.10 | 2400 | 500 | 150 | 25.0 | 47(-0.014-0.039) | 5X3 | 6204 | 18.796 | 0.34 |
B205 | 98 | 0.20 | 1800 | 400 | 150 | 25.0 | 52(0.017-0.042) | 5X3 | 6205 | 23.622 | 0.45 |
B206 | 235 | 0.20 | 1800 | 350 | 150 | 28.0 | 62(-0.017-0.042) | 7X4 | 6206 | 32.766 | 0.68 |
B207 | 372 | 0.20 | 1800 | 300 | 150 | 28.0 | 72(-0.017—0.042) | 7X4 | 6207 | 42.088 | 0.80 |
B208 | 549 | 0.20 | 1800 | 200 | 150 | 32.0 | 80(-0.017-0.042) | 10X4.5 | 6208 | 46.761 | 0.91 |
B209 | 549 | 0.20 | 1800 | 200 | 150 | 32.0 | 85(-0.020-0.045) | 10X4.5 | 6209 | 46.761 | 0.95 |
B210 | 784 | 0.29 | 1200 | 200 | 150 | 32.0 | 90(-0.020-0.045) | 10X4.5 | 6210 | 56.109 | 1.00 |
B211 | 784 | 0.29 | 1200 | 200 | 150 | 32.0 | 100(-0.020-0.050) | 10X4.5 | 6211 | 56.109 | 1.40 |
B212 | 1230 | 0.29 | 1200 | 180 | 150 | 42.0 | 110(-0.020-0.050) | 10X4.5 | 6212 | 70.029 | 1.80 |
B213 | 1230 | 0.29 | 1200 | 180 | 150 | 42.0 | 120(-0.020-0.050) | 10X4.5 | 6213 | 70.029 | 2.30 |
B214 | 1390 | 0.39 | 180 | 180 | 150 | 42.0 | 125(-0.024-0.060) | 12X4.5 | 6214 | 79.356 | 2.4 |
Installation and Usage of Freewheel Clutch Bearing
1. 200 Series Cam Clutch is shaft mounted, so the shaft on which the clutch is mounted must be hardened to Rc 56-60 and 1.5 mm case depth after grinding. Grind to 1.5S (16micro-inch) finish. The taper of this shaft should not exceed 0.01 mm per 50mm.
2. For installation of the clutch, mount the clutch with bearings at both sides or on one side in order to obtain concentricity between the shaft and the clutch outer race and to take up radial or thrust loads which may work on the outer race or the shaft. See the installation example.
3. The clutch should be mounted on the shaft by rotating it in the direction marked by the arrow shown on the clutch plate. Do not apply shock to the clutch by hammering.
4. The clutches have the same outside diameters as the bearings shown in the table above. Bore tolerance of the housing in which the clutch is assembled should be within the range shown in the table below.
5. For indexing, oil lubrication is recommended.
6. Concentricity of the housing bore and shaft should be within 0.05 mm.
Company Details
Business Type:
Exporter,Trading Company,Seller
Year Established:
2005
Total Annual:
3000000-5000000
Employee Number:
100~120
Ecer Certification:
Active Member
Shaanxi Fortune Industries Co.,ltd located in Xi’an of the oldest city in China. We have experience for over 15 years, As a professional exporter in Ball & Roller Bearings and Auto Parts on standard and nonstandard, our success is based on: High Quality Bearing at the Good Price ... Shaanxi Fortune Industries Co.,ltd located in Xi’an of the oldest city in China. We have experience for over 15 years, As a professional exporter in Ball & Roller Bearings and Auto Parts on standard and nonstandard, our success is based on: High Quality Bearing at the Good Price ...
Get in touch with us
Leave a Message, we will call you back quickly!