| Cargo Body Dimension | 5800 x 2300 x 1500 mm |
| Gross Vehicle Weight | 25,000 kg |
| Displacement | 9.726 L |
| Brake System | Dual circuit air brake with ABS |
| Drive Type | 6x4 with inter-axle differential lock |
| Cargo Body Material | High-tensile steel, floor 12 mm, sides 8 mm |
| Suspension | Multi-leaf spring, front and rear |
| Payment Terms | T/T,L/C |
| Transmission | FAST 10JSD160, 10-forward 2-reverse |
| Wheelbase | 3800+1350 mm |
| Fuel Tank Capacity | 400 L |
| Emission Standard | Euro II |
| Tire Specification | 12.00R20 off-road tread |
| Cab Configuration | X3000 single berth flat-top cab with A/C and heater |
| Rated Power | 280 kW (380 HP) @ 2200 rpm |
| Loading Capacity | 30,000 kg |
| Delivery Time | 35-55 working days after deposit |
| Max Torque | 1600 Nm @ 1200-1600 rpm |
| Supply Ability | 500 Units per Month |
| Packaging Details | Nude packing with anti-rust treatment. Wax spray on exposed surfaces. RO-RO vessel or flat rack container available per destination port requirement. |
| Engine Model | Weichai WP10.380E32 |
| Place of Origin | SHAANXI,XIAN |
| Model Number | SHACMAN X3000 6x4 Dump Truck |
| Certification | ISO 9001:2015, CCC |
| Brand Name | SHACMAN |
View Detail Information
Explore similar products
SHACMAN H3000 6X4 400HP Economical Dump Truck Low Maintenance 400L Aluminum Tank
SHACMAN L3000 6x4 Dump Truck Featuring ISDe285 30 Engine 285 HP and 10JSX110A
Reinforced Mining Tipper Truck | SHACMAN X3000 6x4 420HP Euro III
SHACMAN H3000 6X4 400HP Long Range Dump Truck 400L Aluminum Fuel Tank Extended
Product Specification
| Cargo Body Dimension | 5800 x 2300 x 1500 mm | Gross Vehicle Weight | 25,000 kg |
| Displacement | 9.726 L | Brake System | Dual circuit air brake with ABS |
| Drive Type | 6x4 with inter-axle differential lock | Cargo Body Material | High-tensile steel, floor 12 mm, sides 8 mm |
| Suspension | Multi-leaf spring, front and rear | Payment Terms | T/T,L/C |
| Transmission | FAST 10JSD160, 10-forward 2-reverse | Wheelbase | 3800+1350 mm |
| Fuel Tank Capacity | 400 L | Emission Standard | Euro II |
| Tire Specification | 12.00R20 off-road tread | Cab Configuration | X3000 single berth flat-top cab with A/C and heater |
| Rated Power | 280 kW (380 HP) @ 2200 rpm | Loading Capacity | 30,000 kg |
| Delivery Time | 35-55 working days after deposit | Max Torque | 1600 Nm @ 1200-1600 rpm |
| Supply Ability | 500 Units per Month | Packaging Details | Nude packing with anti-rust treatment. Wax spray on exposed surfaces. RO-RO vessel or flat rack container available per destination port requirement. |
| Engine Model | Weichai WP10.380E32 | Place of Origin | SHAANXI,XIAN |
| Model Number | SHACMAN X3000 6x4 Dump Truck | Certification | ISO 9001:2015, CCC |
| Brand Name | SHACMAN | ||
| High Light | 6x4 All Wheel Drive System ,30 Ton Construction Dump Truck ,Heavy Duty Earthwork Tipper | ||
If your site sees more mud than asphalt, the SHACMAN X3000 6x4 is the configuration you want. This is not a highway truck with a dump body bolted on. The chassis, axles, and suspension were designed for the kind of ground that swallows lighter vehicles up to their diffs. When we deliver these to road construction contractors and dam builders, the first thing they check is the inter-axle differential lock and the ground clearance under the drive axles. They are usually satisfied within the first five minutes.
Unlike a 4x2 or 6x2 setup, the dual drive axles in the X3000 6x4 split torque across four drive wheels. When one side hits soft fill or wet clay, the differential locks route power to the wheels that still have bite. This keeps you moving without calling in a dozer to tow you out. The 12.00R20 tires run at pressures that spread 25 tons of gross weight wide enough to avoid sinking on most construction site surfaces.
The Weichai WP10.380E32 pushes 380 HP and 1,600 Nm through a FAST 10-speed gearbox into dual reduction axles. The ratio spread on the 10JSD160 means you have a crawler gear for loading areas and an overdrive top gear for road transit between site zones. Clutch is a 430 mm single dry plate that mechanics can swap in under four hours with basic tools.
The 5800 x 2300 x 1500 mm box uses 12 mm floor plate and 8 mm side plates in abrasion-resistant steel. This holds up under repeated loading from wheel loaders dropping aggregate and riprap from height. The single-cylinder front-lift hoist tips the body in 25 seconds. Tailgate opens automatically on lift or can be locked for controlled spreading.
Highway construction earthmoving, dam and reservoir excavation, sand and gravel pit haulage, building foundation spoil removal, railway bed construction, and port bulk material handling. These trucks are working right now on infrastructure sites in Nigeria, Kenya, Tanzania, and the Philippines.
We keep chassis in stock at the factory yard. If you need one modified, tell us your local conditions and we adjust the body thickness, tailgate configuration, or tire spec before shipping. Standard delivery to major African and Southeast Asian ports runs 25 to 35 days after deposit clears.
![]()
![]()
![]()
Company Details
Business Type:
Trading Company
Year Established:
2025
Total Annual:
15000-20000
Employee Number:
10~20
Ecer Certification:
Verified Supplier
Henan Senyao Heavy Truck International Trade Co., Ltd is a professional SHACMAN customization service provider, which specialize in the customization of unique, multi purpose SHACMAN trucks. With extensive industry experience, we focus on providing a full range of Shacman heavy-duty trucks, includin... Henan Senyao Heavy Truck International Trade Co., Ltd is a professional SHACMAN customization service provider, which specialize in the customization of unique, multi purpose SHACMAN trucks. With extensive industry experience, we focus on providing a full range of Shacman heavy-duty trucks, includin...
Get in touch with us
Leave a Message, we will call you back quickly!