Henan Senyao Heavy Truck International Trade Co., Ltd.
| Supply Ability | 30 Units per Month |
| Tank Insulation | 50mm Rockwool + Aluminum Cladding |
| Discharge Pump | Positive displacement screw pump, 40 m3/h |
| Engine Model | Weichai WP10.340E32 |
| Chassis Brand | SHACMAN F3000 6x4 |
| Tank Material | 6mm Carbon Steel + Internal Heating Coils |
| Hose | 3-inch heated discharge hose, 6m length |
| Driving Type | LHD / RHD Available |
| Delivery Time | 35-55 working days after deposit |
| Packaging Details | Nude packing with anti-rust coating; optional shrink-wrap for ocean freight |
| Payment Terms | T/T,L/C |
| Tank Capacity | 18,000 Liters |
| Safety | Flame arrestor, static grounding, temp gauge |
| Emission Standard | Euro 2 / Euro 3 |
| Heating System | Exhaust gas heat exchanger + diesel burner |
| Transmission | FAST 9-speed Manual |
| Max Heating Temp | Up to 80 degrees C |
| Engine Power | 340 HP |
| Place of Origin | Shaanxi, China |
| Brand Name | SHACMAN |
| Model Number | F3000 6x4 Fuel tanker |
| Certification | ISO 9001:2015, CCC |
View Detail Information
Explore similar products
Water Tanker Truck for Road Cleaning Brand New Shacman 20 M3 6X4 300HP Water
28000L SHACMAN F3000 6x4 Gasoline Petrol Transport Tanker Truck 340HP Explosion
10000L SHACMAN F3000 6x4 Waste Oil Recovery Vacuum Tanker Truck 340HP Suction
30000L SHACMAN F3000 6x4 Water Transport Tanker Truck Weichai 340HP Single
Product Specification
| Supply Ability | 30 Units per Month | Tank Insulation | 50mm Rockwool + Aluminum Cladding |
| Discharge Pump | Positive displacement screw pump, 40 m3/h | Engine Model | Weichai WP10.340E32 |
| Chassis Brand | SHACMAN F3000 6x4 | Tank Material | 6mm Carbon Steel + Internal Heating Coils |
| Hose | 3-inch heated discharge hose, 6m length | Driving Type | LHD / RHD Available |
| Delivery Time | 35-55 working days after deposit | Packaging Details | Nude packing with anti-rust coating; optional shrink-wrap for ocean freight |
| Payment Terms | T/T,L/C | Tank Capacity | 18,000 Liters |
| Safety | Flame arrestor, static grounding, temp gauge | Emission Standard | Euro 2 / Euro 3 |
| Heating System | Exhaust gas heat exchanger + diesel burner | Transmission | FAST 9-speed Manual |
| Max Heating Temp | Up to 80 degrees C | Engine Power | 340 HP |
| Place of Origin | Shaanxi, China | Brand Name | SHACMAN |
| Model Number | F3000 6x4 Fuel tanker | Certification | ISO 9001:2015, CCC |
| High Light | 18000L Crude Oil Tanker ，Heated Discharge Pump System ，Heavy Crude Transport Truck | ||
Heated tank for heavy crude and bitumen — 50mm insulation, exhaust heat exchanger, screw pump discharge
F3000 6x4 crude oil tanker — insulated tank with aluminum cladding
Heating system controls and temperature gauge at rear cabinet
This is the tanker you need when you are moving heavy crude, bitumen, or residual fuel oil that will not flow at ambient temperature. The tank holds 18,000 liters (less than standard tankers because the insulation and heating hardware take up volume) and is built on the SHACMAN F3000 6x4 with the proven 340HP Weichai. Tank shell is 6mm carbon steel with internal heating coils running the full length of the tank floor.
Heating comes from two sources: an exhaust gas heat exchanger that uses waste heat from the engine (free energy while you are driving), and a diesel-fired burner for stationary heating at the loading/unloading point. The tank is wrapped in 50mm rockwool insulation with an aluminum cladding jacket — touch the outside after a 4-hour run and it is barely warm. Temperature is monitored via a dial gauge at the rear control cabinet. Target discharge temperature is 60-80 degrees C, reachable in about 45 minutes from cold with the burner.
| Tank Capacity | 18,000 Liters |
| Tank Material | 6mm Carbon Steel |
| Insulation | 50mm Rockwool + Aluminum Cladding |
| Heating | Exhaust heat exchanger + diesel burner |
| Max Temp | Up to 80 degrees C (45 min from cold) |
| Discharge Pump | Positive displacement screw, 40 m3/h |
Heated discharge hose and PD screw pump for viscous oil handling
Discharge uses a positive displacement screw pump rather than a centrifugal — PD pumps handle viscous fluids much better and do not lose prime easily. Flow rate is about 40 cubic meters per hour at operating viscosity. The 3-inch discharge hose is electrically heat-traced and insulated so the product does not cool and clog during unloading. Safety features include a flame arrestor on the tank vent, static grounding reel, and an emergency stop at the rear control station. We shipped two of these to an oil field service company in South Sudan — they run them daily between wellheads and the central gathering station without issues.
Company Details
Business Type:
Trading Company
Year Established:
2025
Total Annual:
15000-20000
Employee Number:
10~20
Ecer Certification：
Verified Supplier
Henan Senyao Heavy Truck International Trade Co., Ltd is a professional SHACMAN customization service provider, which specialize in the customization of unique, multi purpose SHACMAN trucks. With extensive industry experience, we focus on providing a full range of Shacman heavy-duty trucks, includin... Henan Senyao Heavy Truck International Trade Co., Ltd is a professional SHACMAN customization service provider, which specialize in the customization of unique, multi purpose SHACMAN trucks. With extensive industry experience, we focus on providing a full range of Shacman heavy-duty trucks, includin...
Get in touch with us
Leave a Message, we will call you back quickly!