Shanghai Shenghua Cable (Group) Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T |
| Supply Ability | 5000 KM per month |
| Delivery Time | 15 working days |
| Packaging Details | Wooden Iron Drum |
| Conductor | Copper |
| Insulation | XLPE/PVC |
| Wrapping Tape | LSOH BendingTape |
| Sheath | LSOH Flame Retardant |
| Rated Voltage | 600/1000V |
| Cores No. | 5 cores |
| Corporation | shenghua group |
| Brand | Sh Cable |
| Brand Name | SHAN CABLE |
| Model Number | CU/MICA/XLPE/LSOH FR |
| Certification | CE/KEMA/IEC |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
CU / Mica Tape Fire Resistant Cable For Sprinkler / Smoke Control System
Mica Tape Screened Heat Resistant Flexible Cable LSZH PO Insulated 4mm 6mm 10mm
Colorful 450V / 750V Fire Alarm Cables , Heat Resistant Electrical Cable
Copper Conductor Reliable Fire Performance Cable Colored PVC Insulated Sheathed
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T | Supply Ability | 5000 KM per month |
| Delivery Time | 15 working days | Packaging Details | Wooden Iron Drum |
| Conductor | Copper | Insulation | XLPE/PVC |
| Wrapping Tape | LSOH BendingTape | Sheath | LSOH Flame Retardant |
| Rated Voltage | 600/1000V | Cores No. | 5 cores |
| Corporation | shenghua group | Brand | Sh Cable |
| Brand Name | SHAN CABLE | Model Number | CU/MICA/XLPE/LSOH FR |
| Certification | CE/KEMA/IEC | Place of Origin | CHINA |
| High Light | fire retardant cable ，fire proof cable | ||
Fire Resistant XLPE insulation Flame Retardant sheath Power cable
Application:
To be laid directly in ground, outdoors, indoors and in cable ducts.
Used for tall building, Hospital, Theatre, Power station, Metro Tunnel or Petrochemical Industry or other special place required for low smoke , zero halogen clean and safe cable.
1,Long-term allowable operating temperature of cable conductor ≤90°C
2Highest working temperature of cable in case of short circuit (the longest lasting time is not over 5s): cable conductor≤ 250°C
3The laying temperature should over 0℃,Permissible bending radius of cable:for single core unarmored cable, should be no less than 20 times of it’s outer diameter ; for multi-core unarmored cable, should be no less than 15 times of it’s outer diameter
4,With fire-resistant property, N,ZAN,ZBN,ZCN,ZDN are 5 types
5The product is applicable for AC 50 Hz transmission and distribution lines with rated voltage of 0.6/1KV
Construction:
1 ..... stranded (RM) bare copper
2 ..... Mica Tape for Fire Resistant
3 ..... core insulation of cross-linked polyethylene
4 ..... Fillers
5 ..... Wrapping tape or Flame Retardant tape
6 ..... PVC Inner Bedding
7 ..... Galvanized Steel Wire Armour
8 ..... outer sheath of polyvinylchloride (PVC)
Standards:
IEC 60502, 60228, 60332, 60331
DIN VDE 0276-620
HD 620 S1: 1996
DIN EN 60228 class 2 (construction)
Technical data:
Test voltage 0.6/1 kV [kV] 3.5 / 5 min.
Temperature range in motion -5°C till +70°C
fixed -20°C till +70°C
Operating temperature short circuit °C 250
Short circuit time max. [sec] 5
Bending radius min. x diameter 15
Flammability standard EN 60332-1-2
Specifications:
lnternational: IEC60502. IEC60228, (lEC60332-3forFRcableonly) China: GB/T12706,(GB/T18380-3 for FR cable only)
Other standards such as BS, DIN and lCEAupon request
Technical data
Rated voltage: 0.6/ 1㎸
Maximum Conductor Temperature: under normal (90°C), emergency(130°C) or short circuit no more than 5 s(250°C) conditions Min.Ambient Temp.-15°C,lnstallationTemp.0°C
The maximum rated temperature
XLPE insulated,the maximum operating temperature of conductor shall exceed 90℃when the cable is used for long not period. The temperature of conductor shall not exceed 250℃ at short circuit for 5 seconds.
PVC insulated,the maximum operating temperature of conductor shall exceed 90℃ or 70 ℃ when the cable is used for long not period. PVC insulated the temperature of conductor shall not exceed 160℃ at short circuit for 5 seconds.
Installation requirement
The installation of cable is not limited by the difference of elevation along the route. The ambient temperature should not be below 0℃ during installation. The permissible bending radius for cable shall be complied with the following regulations:
For single-core: R>20(D+d) +/-5%
For multi-core: R>15(D+d) +/-5%
Where:R—bending radius (mm) , D—overall diameter of the cable (mm) , d—diameter of conductor (mm).
Single core cable of using in AC circuit shall be without armour or with steel wire armour and shall not be laid in magnetic ducs.
Company Details
Business Type:
Manufacturer
Year Established:
1997
Total Annual:
150000000-200000000
Employee Number:
5000~6000
Ecer Certification：
Verified Supplier
Company Profile Shanghai Shenghua Cable Group Co., LTD., the headquartered in Pudong New Area, Shanghai. As the leading company in cable industry, Shenghua has a large scale of domestic wire and cable manufacturing enterprises including Shanghai Shenghua, Anhui Lvbao, Ji... Company Profile Shanghai Shenghua Cable Group Co., LTD., the headquartered in Pudong New Area, Shanghai. As the leading company in cable industry, Shenghua has a large scale of domestic wire and cable manufacturing enterprises including Shanghai Shenghua, Anhui Lvbao, Ji...
Get in touch with us
Leave a Message, we will call you back quickly!