Xiangjing (Shanghai) M&E Technology Co., Ltd
| Packaging Details | Cardboard box/Wooden crate |
| Power | Loop-powered from 4-20 mA signal |
| Payment Terms | T/T |
| Input Signal | 4-20 mA (two-wire) |
| Delivery Time | 6-8 weeks |
| Minimum Operating Current | Approximately 3.6–3.8 mA |
| Supply Ability | 2000 sets per year |
| Actuator Compatibility | Single-acting (linear and rotary) |
| Air Supply Pressure | Typically 1.5 to 6.0 bar (22 to 87 psi) for original series |
| Communication | HART |
| Model Number | 520MD+ |
| Brand Name | Flowserve |
View Detail Information
Explore similar products
Advanced Self-Diagnostics and IP66 Ingress Protection Control Valve Positioner
Original Masoneilan SVI2 Smart Valve Positioner China Pressure Balanced Single
Pressure Reducing Valve KOSO PRF300 PRF400 And EPA 801 Valve Positioner With
PN29 Butterfly Control Valve With 3400MD Digital Positioner High Performance
Product Specification
| Packaging Details | Cardboard box/Wooden crate | Power | Loop-powered from 4-20 mA signal |
| Payment Terms | T/T | Input Signal | 4-20 mA (two-wire) |
| Delivery Time | 6-8 weeks | Minimum Operating Current | Approximately 3.6–3.8 mA |
| Supply Ability | 2000 sets per year | Actuator Compatibility | Single-acting (linear and rotary) |
| Air Supply Pressure | Typically 1.5 to 6.0 bar (22 to 87 psi) for original series | Communication | HART |
| Model Number | 520MD+ | Brand Name | Flowserve |
The Flowserve Logix 520MD is a two-wire digital valve positioner with HART communication, designed for precise control of single-acting pneumatic actuators on linear and rotary valves. It is powered by the 4-20 mA input signal and uses electronic control combined with a pneumatic output stage to position the valve accurately according to the command signal.
This positioner features simple local configuration and calibration options, including DIP switches and calibration buttons on related MD series units. It supports HART protocol for remote setup and monitoring. The design emphasizes reliable performance in industrial environments, with options for local status indicators and, in later versions, enhanced diagnostic capabilities. The Logix 520MD series has been widely applied for valve positioning where digital communication and consistent response are required. Note that the original Logix 520MD is primarily supported as an aftermarket product, with the updated 520MD+ representing the current generation offering improved features.
| Specification | Details |
|---|---|
| Type | Digital HART Positioner |
| Input Signal | 4-20 mA (two-wire) |
| Communication | HART |
| Power | Loop-powered from 4-20 mA signal |
| Minimum Operating Current | Approximately 3.6–3.8 mA |
| Actuator Compatibility | Single-acting (linear and rotary) |
| Air Supply Pressure | Typically 1.5 to 6.0 bar (22 to 87 psi) for original series |
| Output Pressure | 0 to 100% of supply pressure |
| Housing / Protection | Industrial design suitable for process environments |
| Hazardous Area Options | Intrinsically Safe and Non-Incendive ratings available (series dependent) |
Used in process industries such as oil and gas, chemical processing, power generation, refining, and general industrial plants for accurate positioning of pneumatic control valves.
Users of conventional positioners may experience limited remote diagnostics, more involved calibration, or reduced insight into valve health. The Logix 520MD series addresses these through HART communication, local interface options, and diagnostic features that help monitor performance.
The original Logix 520MD can be replaced or upgraded with the current Logix 520MD+ digital positioner, which offers enhanced diagnostics, piezo technology, and broader communication support while maintaining similar mounting and application compatibility.
We supply genuine Flowserve Logix positioners and related aftermarket support, with practical assistance for matching the correct configuration to your valve and process requirements.
Typical production and delivery time is 6-8 weeks (subject to availability for aftermarket or current-generation units).
Please provide details on actuator type, mounting preference, required communication or diagnostic level, hazardous area needs, and quantity for a tailored quotation.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller,Other
Year Established:
2015
Total Annual:
30,000,000-50,000,000
Employee Number:
200~300
Ecer Certification：
Verified Supplier
.gtr-container-x7y2z9 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; font-size: 14px; line-height: 1.6; color: #333; padding: 16px; box-sizing: border-box; } .gtr-container-x7y2z9 p { margin-bottom: 1em; text-align: left !important; } .gtr-container-x7y2z... .gtr-container-x7y2z9 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; font-size: 14px; line-height: 1.6; color: #333; padding: 16px; box-sizing: border-box; } .gtr-container-x7y2z9 p { margin-bottom: 1em; text-align: left !important; } .gtr-container-x7y2z...
Get in touch with us
Leave a Message, we will call you back quickly!