Xiangjing (Shanghai) M&E Technology Co., Ltd
| Payment Terms | T/T |
| Material | Aluminum Alloy |
| Type | Control,pneumatic |
| Power | Pneumatic |
| Delivery Time | 5~8 weeks |
| Application | General,industrial |
| Standard | DIN,ANSI,BS,ASTM |
| Supply Ability | 2,750 units per year |
| Standard or nonstandard | Standard |
| Packaging Details | carton or wooden crate, 30 × 30 × 30 cm |
| Structure | Control,Angle stroke |
| Model Number | 520MD |
| Brand Name | Flowserve Logix |
View Detail Information
Explore similar products
Foxboro SRD991 Series Smart Digital Valve Positioner HART 4-20mA for Control
Advanced Self-Diagnostics and IP66 Ingress Protection Control Valve Positioner
Original Masoneilan SVI2 Smart Valve Positioner China Pressure Balanced Single
Pressure Reducing Valve KOSO PRF300 PRF400 And EPA 801 Valve Positioner With
Product Specification
| Payment Terms | T/T | Material | Aluminum Alloy |
| Type | Control,pneumatic | Power | Pneumatic |
| Delivery Time | 5~8 weeks | Application | General,industrial |
| Standard | DIN,ANSI,BS,ASTM | Supply Ability | 2,750 units per year |
| Standard or nonstandard | Standard | Packaging Details | carton or wooden crate, 30 × 30 × 30 cm |
| Structure | Control,Angle stroke | Model Number | 520MD |
| Brand Name | Flowserve Logix | ||
| High Light | HART Communication Digital Valve Positioner ，High-Performance Valve Positioner ，Pneumatic Output Control Valve Positioner | ||
Product Overview
The Flowserve Logix 520MD is a high-performance digital valve positioner that uses HART communication. It accepts a two-wire 4-20mA control signal and delivers a proportional pneumatic output to a valve actuator. The unit is powered entirely by the 4-20mA input signal. It controls single-acting actuators with linear and rotary mountings.
The positioner uses a multi-variable gain tuning algorithm that allows large step changes with minimal overshoot while maintaining high resolution for very small step changes. An Auto-tune procedure cycles the actuator to generate a measured response and automatically selects gain values that optimize actuator performance. A gain modifier selector allows further fine-tuning of the calculated gain. Simple DIP switches handle tuning mode and other common settings, while ValveSight software provides standard diagnostic functionality.
The design offers fast, easy, and accurate calibration with self-calibration and adjustable gain selection. Steady-state air consumption is low, and the two-stage control design provides faster response times and tighter control. The unit supports HART 5, 6, and 7, and is rated for use in hazardous areas.
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | Flowserve |
| Communication Protocol | HART 5, 6 and 7 |
| Input Signal | 4-20mA (HART), two-wire |
| Data Interface | Wired |
| Diagnostics | Standard Diagnostic functionality through ValveSight software |
| Supply Pressure | 1.5 to 6.0 bar (22 to 87 psig) |
| Output Signal | Pneumatic (0 to 100% of air supply pressure) |
| Linearity | < ±1.0% typical |
| Repeatability | < 0.2% |
| Deadband | < 0.2% |
| Mounting Type | Rotary and Linear actuators; Single-acting |
| Operating Temperature | -40°C to +80°C (-40°F to +178°F) |
| Enclosure Rating | IP66 / NEMA 4X |
| Housing Material | Industrial Aluminum |
| Weight | Approx. 3.5 kg |
| Minimum Operating Current | 3.6 mA (without AO); 3.83 mA (with AO) |
| Voltage Supply (Maximum) | 30 VDC |
| Air Consumption (Steady State) | 0.08 Nm³/h @ 1.5 bar to 0.12 Nm³/h @ 6.0 bar |
| Output Flow Capacity | Up to 7.0 Nm³/h @ 6.0 bar |
| Certifications | ATEX, FM, CSA, SIL 2 |
| Intrinsically Safe | Class I Division 1 Groups A-D |
| Non-Incendive | Class I Division 2 Groups A-D |
Application Industry
The Flowserve Logix 520MD is used in oil and gas, chemical processing, power generation, water treatment, and pharmaceutical industries. Key applications include pipeline and actuator control, reactor valve positioning, turbine bypass automation, flow regulation in plants, and hygienic valve operations. Its certified hazardous area rating makes it suitable for demanding process environments.
Common Problems
No LED blinking: Current is below 3.6 mA or wiring polarity is incorrect. Verify supply current is at least 3.6 mA and check polarity.
Erratic communications: HART signal issues. Check current source bandwidth is limited to 25Hz. Verify cable length and impedance. Use a compatible intrinsic safety barrier.
Unit does not respond to analog commands: Unit is in digital command mode or a calibration error occurred. Change command mode to analog. Recalibrate the unit.
Valve position reading not as expected: Position sensor mounting not at 180 degrees, stroke not calibrated, or MPC active. Reposition sensor. Calibrate stroke.
Position driven fully open or closed: Stroke not calibrated, Hall sensor inner loop not connected, wrong air action set, or tubing reversed. Calibrate stroke. Check hardware connections.
Friction Calibration Required: No friction calibration performed since factory reset. Perform Friction Calibration using the display menu, handheld, or DTM.
Replacement Models
The Flowserve Logix 520MD series is a mature digital positioner platform. For applications requiring additional safety integrity, the Logix 520MD+ variant offers enhanced features. For newer installations, the Logix 3200MD and Logix 3800MD are alternative models within the same product family. For cross-vendor alternatives, verify actuator mounting, travel range, and communication protocol before ordering.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller,Other
Year Established:
2015
Total Annual:
30,000,000-50,000,000
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Xiangjing (Shanghai) - Leading Distributor of Pneumatic and Electric Control Valves Established in Shanghai, China, Xiangjing(Shanghai) Mechanical and Electrical Tech Co.,Ltd has been a trusted distributor of high-quality pneumatic and electric control valves for many years. With extensive industr... Xiangjing (Shanghai) - Leading Distributor of Pneumatic and Electric Control Valves Established in Shanghai, China, Xiangjing(Shanghai) Mechanical and Electrical Tech Co.,Ltd has been a trusted distributor of high-quality pneumatic and electric control valves for many years. With extensive industr...
Get in touch with us
Leave a Message, we will call you back quickly!