Xiangjing (Shanghai) M&E Technology Co., Ltd
| Delivery Time | 5~8 weeks |
| Application | General |
| Standard | DIN,ANSI,BS,ASTM |
| Payment Terms | T/T |
| Material | Aluminum Alloy |
| Type | Control,pneumatic |
| Power | Pneumatic,electric |
| Supply Ability | 2,750 units per year |
| Standard or nonstandard | Standard |
| Packaging Details | carton or wooden crate, 30 × 30 × 30 cm |
| Structure | Control,Angle stroke |
| Model Number | ND7000 |
| Brand Name | Neles |
View Detail Information
Explore similar products
Foxboro SRD991 Series Smart Digital Valve Positioner HART 4-20mA for Control
Advanced Self-Diagnostics and IP66 Ingress Protection Control Valve Positioner
Original Masoneilan SVI2 Smart Valve Positioner China Pressure Balanced Single
Pressure Reducing Valve KOSO PRF300 PRF400 And EPA 801 Valve Positioner With
Product Specification
| Delivery Time | 5~8 weeks | Application | General |
| Standard | DIN,ANSI,BS,ASTM | Payment Terms | T/T |
| Material | Aluminum Alloy | Type | Control,pneumatic |
| Power | Pneumatic,electric | Supply Ability | 2,750 units per year |
| Standard or nonstandard | Standard | Packaging Details | carton or wooden crate, 30 × 30 × 30 cm |
| Structure | Control,Angle stroke | Model Number | ND7000 |
| Brand Name | Neles | ||
| High Light | ND7000 smart valve positioner HART ，digital valve positioner 4-20mA ，industrial control valve positioner | ||
Product Overview
The Neles ND7000 is a microprocessor-based intelligent valve controller that delivers precise regulation of pneumatic actuators across all industrial sectors. Powered by a 4-20mA loop, it constantly evaluates the command signal against the real valve position and corrects the actuator to match. The design works with every control valve actuator. Contactless position sensing removes mechanical wear from the feedback path. The same hardware supports rotary and linear valves, plus single- and double-acting actuators. Local user interface or remote DTM/EDD simplifies commissioning. One-point calibration allows mounting on in-service valves without process interruption. TÜV SIL 2 per IEC 61508. Diagnostics cover self-check, online, performance, and communication. Stores up to 8000 alarms and reminders, 25-year retention. Advanced monitoring tracks friction, spring force, and wear for predictive maintenance.
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | Neles |
| Communication Protocol | HART |
| Input Signal | 4-20mA |
| Data Interface | Wired |
| Diagnostics | Self-diagnostics; Deviation Trend; Counters; Extended Off-line Tests |
| Supply Pressure | 1.4~8 bar (20~115 psig) |
| Mounting Type | Rotary and Linear valves; Single and Double-acting actuators |
| Operating Temperature | -40°C~+85°C, standard; -53°C~+85°C, arctic version |
| Enclosure Protection | IP66 / NEMA 4X |
| Housing Material | Anodised aluminum alloy |
| Air Connections | G 1/4 |
| Certifications | SIL 2 (TÜV, IEC 61508); ATEX, IECEx, INMETRO |
| Communication Software | FDT/DTM; EDD |
Application Industry
The Neles ND7000 is used in oil and gas, chemical processing, power generation, mining, and general industrial automation. The device can be integrated with all major DCS systems and supports mounting kits for any third-party actuators. It is fully compatible with different manufacturers' systems and equipment.
Common Problems
A change in valve position setpoint will not affect actuator position: Check supply pressure (may be too low), spool valve sticking, incorrect configuration parameters, actuator or valve jammed, signal wires incorrectly connected, or calibration not carried out.
Actuator goes to end position with small input signal change: Tubes between controller and actuator are incorrect. Check parameter settings PFA and ROT.
Inaccurate positioning: Spool valve dirty, too high actuator load, supply pressure too low, spool or pressure sensors defective, or actuator leakage.
Overshooting or positioning too slow: Change PERF value, spool valve dirty, supply air tube too small, or supply air filter dirty.
Replacement Models
The Neles ND7000 is a mature intelligent valve controller platform. The ND9000 series is the next-generation upgrade with enhanced diagnostics and fieldbus options. The ND7000 serves as a direct replacement for legacy NE700/NP700 positioners. For cross-vendor alternatives, verify actuator mounting, travel range, and communication protocol before ordering.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller,Other
Year Established:
2015
Total Annual:
30,000,000-50,000,000
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Xiangjing (Shanghai) - Leading Distributor of Pneumatic and Electric Control Valves Established in Shanghai, China, Xiangjing(Shanghai) Mechanical and Electrical Tech Co.,Ltd has been a trusted distributor of high-quality pneumatic and electric control valves for many years. With extensive industr... Xiangjing (Shanghai) - Leading Distributor of Pneumatic and Electric Control Valves Established in Shanghai, China, Xiangjing(Shanghai) Mechanical and Electrical Tech Co.,Ltd has been a trusted distributor of high-quality pneumatic and electric control valves for many years. With extensive industr...
Get in touch with us
Leave a Message, we will call you back quickly!