Weifang Shihua Chemical Building Material Co., Ltd.
Products
Manufacturer of a wide range of products which include Self Adhesive Polymer Hdpe Waterproof Membrane No Leakage For Civil Air Defense,Backed Hdpe Sheet Waterproofing Pre Laid For Underground Engineering,Homogeneous Epdm Waterproo...
MOQ: 3000㎡
Price: USD 1.25‑3.5 /㎡
| Static load resistance | 20 kg, no leakage |
| Low‑temperature flexibility | Adhesive layer:‑25 ℃, no crack |
| Application | Special for underground projects |
| Supply Ability | 500000㎡per Month |
| Construction | Cold application, flameless |
| Impact resistance (0.5 kg·m) | No leakage |
| Oil‑penetration resistance /number of sheets | ≤1 |
| Packaging Details | Plastic woven bags / Customizable |
| Applicable Base | Usable on damp substrate |
| Heat resistance | 80 ℃, 2 h: no slipping, flowing or dripping |
| Low‑temperature bending property | Main material:‑35 ℃, no crack |
| Model Number | 1.0mm，1.2mm，1.5mm |
| Brand Name | shhous |
| Certification | ISO |
| Place of Origin | Shandong, China |
MOQ: 3000㎡
Price: USD 2.2‑3.7 /㎡
| Base Material | High Density Polyethylene |
| Standard Widt | 1m / 2m(Customizable) |
| Supply Ability | 500000㎡per Month |
| Construction | Cold application, flameless |
| Product Type | Non-asphalt pre-laid reverse bonding membrane |
| Roll Length | 20m (Customizable) |
| Packaging Details | Plastic woven bags / Customizable |
| Feature | No leveling & no protective layer needed |
| Surface Craft | One side sand coated, one side backed |
| Regular Thickness | 1.2mm / 1.5mm / 1.7mm(Customizable) |
| Model Number | 1.2mm，1.5mm，2.0mm |
| Brand Name | shhous |
| Certification | ISO |
| Place of Origin | Shandong, China |
MOQ: 1000㎡
Price: USD 1.5‑5.5/㎡
| Water Impermeability | 0.3 MPa, 30 min, no water penetration |
| Tear Strength | ≥25 kN/m |
| Supply Ability | 500000㎡per Month |
| Operating Temperature Range | -40 ℃～120 ℃ |
| Product Form | Homogeneous rubber sheet |
| Elongation at Break | ≥450 % |
| Lap Joint | Bonding with special adhesive |
| Packaging Details | Plastic woven bags / Customizable |
| Laying Method | Loose-lay, full bonding, dot bonding, strip bonding available |
| Low-temperature Bending Property | -40 ℃, no crack |
| Model Number | 1.2mm，1.5mm，2.0mm |
| Brand Name | shhous |
| Place of Origin | Shandong, China |
| Certification | ISO |
MOQ: 1000㎡
Price: USD 1.5‑5.5 /㎡
| Product Specification | Common thickness:1.2mm,1.5mm,2.0mm |
| Application | Large-span roof, green roof, tunnel, underground works, municipal water tank |
| Tensile Strength at Break (23℃) | ≥60 N/cm |
| Supply Ability | 500000㎡per Month |
| Tear Strength | ≥20 kN/m |
| Main Raw Material | EPDM rubber plus polyester fabric reinforcement |
| Water Impermeability | 0.3 MPa, 30 min, no water penetration |
| Packaging Details | Plastic woven bags / Customizable |
| Elongation at Break (23℃) | ≥400 % |
| Excellent dimensional stability | low thermal expansion-shrinkage, good wind-uplift resistance |
| Construction Process | Cold installation, no open-flame operation |
| Model Number | FL-EPDM-20.0m×1.0m×1.2mm |
| Brand Name | shhous |
| Certification | ISO |
| Place of Origin | Shandong, China |
MOQ: 1000㎡
Price: USD 1.5‑5.5/㎡
| Construction Process | Cold installation, no open-flame operation |
| Tensile Strength at Break (23℃) | ≥60 N/cm |
| Supply Ability | 500000㎡per Month |
| Elongation at Break (23℃) | ≥400 % |
| Product Specification | Common thickness:1.2mm,1.5mm,2.0mm |
| Application | Large-span roof, green roof, tunnel, underground works, municipal water tank |
| Main Raw Material | EPDM rubber plus polyester fabric reinforcement |
| Packaging Details | Plastic woven bags / Customizable |
| Water Impermeability | 0.3 MPa, 30 min, no water penetration |
| Laying Method | Loose-lay, mechanical fastening, full bonding, dot bonding available |
| Model Number | 1.2mm，1.5mm，2.0mm |
| Brand Name | shhous |
| Place of Origin | Shandong, China |
| Certification | ISO |
MOQ: 3000㎡
Price: USD 1.3‑5.2/㎡
| Packaging Details | Plastic woven bags / Customizable |
| Color | Black |
| Width | 1m，1.2m |
| Low-temperature bending | No cracks at -40℃ |
| Application | Waterproofing Projects |
| Supply Ability | 500000㎡per Month |
| Service Life | over 50 years for underground concealed projects |
| Length per roll | 20m (customized length optional) |
| Brand Name | shhous |
| Model Number | 1.2mm，1.5mm |
| Place of Origin | Shandong, China |
| Certification | ISO |
MOQ: 1000kg
Price: USD 1.5‑5.5/kg
| Main Raw Material | Ethylene-Propylene-Diene Monomer (EPDM) rubber |
| Tensile Strength (23℃) | ≥7.5 MPa |
| Supply Ability | 500000㎡per Month |
| Tear Strength | ≥25 kN/m |
| Product Form | Homogeneous rubber sheet |
| Laying Method | Loose-lay, full bonding, dot bonding, strip bonding available |
| Elongation at Break | ≥450 % |
| Packaging Details | Plastic woven bags / Customizable |
| Water Impermeability | 9.0.3 MPa, 30 min, no water penetration |
| Construction Process | Cold application, no open flame required |
| Model Number | JL 1-EPDM-20.0m×1.0m×1.2mm |
| Brand Name | shhous |
| Place of Origin | Shandong, China |
| Certification | ISO |
Explore more categories
Get in touch with us
Leave a Message, we will call you back quickly!
