Sugar Gyratory Vibrating Screen Carbon Steel Gyratory Screen

The plane gyratory sieving machine is another new type of sieving equipment developed by the introduction of foreign advanced technology of circular vibration machinery. This machine has the advantages of reasonable design, simple structure, smooth operation, fully enclosed structure, no dust staining, anti-blocking holes, anti-sticky net, etc.. Especially it is more obvious for urea sieving which is highly hygroscopic, sticky, easy to plug holes and sticky net. As the principle of plane rotary motion is adopted, the dynamic ratio of the equipment and the dynamic load of the foundation are effectively reduced. The equipment adopts the plane rotary vibrating screen up and down vibration, there is automatic cleaning equipment under the net, compared with the traditional linear screen, improved screen life, low noise, large screening area, the efficiency of the original 93 ~ 95 increased to 98.5, good prospects for promotion. Plane gyratory sieve machine is mainly for large particles of urea, soda ash, quartz sand screening development of a new type of screening equipment, but also widely used in chemical, food processing, refractory materials, building materials and other industries of screening operations.

The working principle is to use the ordinary motor to drive the camshaft rotation, so that the screen body for horizontal rotary motion (track for the horizontal circle), does not have the vertical direction of vibration characteristics, does not destroy the original physical properties of the material.

• No vertical vibration, long screen life (6-12 months).
• Each layer of the screen is equipped with screen anti-blocking cleaning device. The screen does not block the holes and prolongs the operation cycle. The sifter continuously cleans the screen in working condition.
• Because of the plane rotary principle, obviously improve the distribution state of the material, so as to improve the effective utilization rate of the screen surface, and finally improve the screening efficiency and reduce the powder content in the finished material.
• Fully enclosed structure without dust pollution, improve the working environment of operating staff.
• The dynamic load on the foundation is very small, and the noise is very low.

Attention: The selection of screening equipment and your use of demand has a lot to do with the following information you need to provide.

If you have ever used the screen machine Kindly please tell us its DIAMETER,LAYERS,MESH SIZES,MATERIALS.

If never use the machine until now Please offer us the info about material as below:

1. the name of the material.
2. Material characteristics (e.g. specific gravity, bulk density, water content, fluidity, adhesion, electrostatic properties, etc.)
3. the purpose of use (sieving / debris / liquid filtration / media separation)
4. How many layers do you need? Mesh size of each layer?
5. expected processing capacity per hour (Kg/h) In this way,we can precisely choose the matching model for you to meet your use requirements.
6. Voltage(V),Frequency(Hz),Phase(P)

Plane gyratory sieve machine is mainly for large particles of urea, soda ash, quartz sand screening development of a new type of screening equipment, but also widely used in chemical, food processing, refractory materials, building materials and other industries of screening operations.

1. Screening and grading of raw materials and soybean peel in oil and grease plant. 2. Screening and grading of chemical large particle urea, feed plant powder material or granular feed. 3. The initial cleaning of raw materials in feed mills and the grading of intermediate products after the second crushing in large and medium-sized feed mills. 4. grain, heavy alkali, large particle urea, small particle urea, ceramic granules, zirconium oxide, reduced iron titanium powder, barite, food and spices, chemical, plastic, mining, rubber, wood and plywood, medicine, sugar, mining, paper and other industries in the raw materials and finished products screening and grading operations.

As one of the largest OEM factories in China, each year we supply around 5000 sets machines to serve more than 150 distributors, manufacturers and traders, providing all kinds of reliable customized equipment to help our clients build their brands.