Shenzhen Hanast New Material co.,LTD
| Payment Terms | T/T、paypal |
| Supply Ability | 100ton/month |
| Delivery Time | 5-7days |
| Packaging Details | 50KG/set, 25KG/bar |
| Thermal Conductivity | ≥0.76 W/m·K |
| Coefficient of Thermal Expansion (CTE) | 210 μm/(m·°C) |
| Volume Resistivity | 1.0×10¹⁶ Ω·cm |
| Operating Temperature Range | -50°C ~ +250°C |
| Hardness (Shore A) | 45±5 |
| Brand Name | Hanast |
| Model Number | HN-8806A/B |
| Certification | FDA/ROHS/REACH |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Hanast 10:1 Potting Compound Insulation And Moisture-Proof Potting AB Adhesive
Insulated Electrical Silicone Potting Compound Gel Flame Retardant Grey Liquid
Deep Curing Potting Silicone HN-8806A/B | Low Shrinkage, RoHS Compliant for
Electronic Rtv Silicone Potting Gel Compound Flexible Adhesive Waterproof
Product Specification
| Payment Terms | T/T、paypal | Supply Ability | 100ton/month |
| Delivery Time | 5-7days | Packaging Details | 50KG/set, 25KG/bar |
| Thermal Conductivity | ≥0.76 W/m·K | Coefficient of Thermal Expansion (CTE) | 210 μm/(m·°C) |
| Volume Resistivity | 1.0×10¹⁶ Ω·cm | Operating Temperature Range | -50°C ~ +250°C |
| Hardness (Shore A) | 45±5 | Brand Name | Hanast |
| Model Number | HN-8806A/B | Certification | FDA/ROHS/REACH |
| Place of Origin | Guangdong, China | ||
| High Light | thermally conductive silicone potting compound ，silicone potting compound for power electronics ，high thermal conductivity potting compound | ||
Thermally Conductive Silicone Potting Compound HN-8806 | ≥0.76 W/m·K for Power Electronics Cooling
Product Overview for silicone potting compound:
Your expert in thermal management. HN-8806 is specifically designed for heat dissipation, with a thermal conductivity of ≥0.76 W/m·K. It effectively reduces the operating temperature of power devices, enhancing reliability and lifespan. While maintaining high electrical insulation, it is the ideal choice for cooling power electronics.
Key Features for silicone potting compound:
Efficient Thermal Conductivity (≥0.76 W/m·K) | High Insulation | Long-Term Thermal Stability | Low CTE | Non-Bleeding.
Technical Parameters:
Thermal Conductivity: ≥0.76 W/m·K
Coefficient of Thermal Expansion (CTE): 210 μm/(m·°C)
Volume Resistivity: 1.0×10¹⁶ Ω·cm
Operating Temperature Range: -50°C ~ +250°C
Hardness (Shore A): 45±5
Product Applications for silicone potting compound:
Power Modules:Direct potting for IGBTs, MOSFETs, diodes, and other power devices.
LED Drivers:Thermal management and protection for high-power LED outdoor drive power supplies.
New Energy:Photovoltaic inverter power sections, energy storage system PCS units.
Industrial Drives:Inverter and servo drive power sections for heat dissipation and insulation.
Usage Instructions for silicone potting compound:
1. Preparation:Ensure heat-generating components and heat sink surfaces are clean for optimal thermal transfer.
2. Mixing & Deaeration:Mix thoroughly and vacuum degas, as air bubbles are poor thermal conductors.
3. Potting:Ensure the compound fully envelops the heat source and contacts the cooling surface.
4. Curing:Cure at room temperature or with heat as required.
Important Notes for silicone potting compound:
Optimal thermal performance depends on bubble-free potting and good contact.
Packaging & Storage for silicone potting compound:
Standard Packaging: Component A 25kg/drum, Component B 25kg/drum.
Store in a cool, dry place. Shelf life: 6 months.
FAQ for silicone potting compound:
Q: What level is 0.76 W/m·K?
A: It is a medium-high level for potting compounds, suitable for most power electronics, effectively reducing hot-spot temperatures.
Q: Are thermal conductivity and electrical insulation contradictory?
A: No, this product is designed for electronics, balancing both thermal and electrical performance.
Q: How to achieve the best cooling effect?
A: Ensure full contact between the compound, heat source, and housing, with no air bubbles.
Q: Does it bleed silicone oil?
A: No, it cures into a stable elastomer with no risk of silicone oil separation.
Q: Do you have higher conductivity grades?
A: Yes, for requirements >1.5 W/m·K, please contact us for advanced grades.
Company Details
Business Type:
Manufacturer,Agent,Trading Company
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Shenzhen Hanast New Materials Co., Ltd. is a subsidiary of Shenzhen Kanglibang Technology Co., Ltd. The brand "Hanast", established in 2019, has been dedicated to expanding the international market. The company is committed to the research and development and innovation of new adhesive mat... Shenzhen Hanast New Materials Co., Ltd. is a subsidiary of Shenzhen Kanglibang Technology Co., Ltd. The brand "Hanast", established in 2019, has been dedicated to expanding the international market. The company is committed to the research and development and innovation of new adhesive mat...
Get in touch with us
Leave a Message, we will call you back quickly!