LED Power Supply Potting Compound HN-8808B/W - High Thermal Conductivity for

Product Specification

LED Power Supply Potting Compound HN-8808B/W - High Thermal Conductivity for Long Life

Product Overview for Silicone Potting Compound:

The lifespan of an LED driver is critical to the overall light's reliability. The HN-8808 series potting compounds significantly reduce internal temperatures by efficiently transferring heat from hotspots (like MOSFETs and rectifiers) via their high thermal conductivity (0.5 W/M·K). The comprehensive waterproof, moisture-proof, insulating, and high-temperature protection safeguards against the harsh internal environment of LED fixtures, including high heat and outdoor humidity, providing a reliable solution to extend LED product life and reduce after-sales costs.

Key Performance Parameters for Silicone Potting Compound:

* Recommended Models: HN-8808B (Black, for thermal + shielding), HN-8808W (White, for high reflectivity)

* Mix Ratio (A:B): 10 : 1 (by weight)

* Thermal Conductivity: 0.5±0.1 W/M·K (GB/T 38712-2020)

* Volume Resistivity: ≥5.0×10¹⁴ Ω·cm (GB/T 31838.2-2019)

* Dielectric Strength: ≥14 kV/mm

* Pot Life (25°C): 40-60 minutes

* Cure Time (25°C): 4-6 hours (tack-free)

* Hardness (Shore A): 30-40 (GB/T531-1999)

* Temperature Range: -50°C ~ 200°C

Product Highlights for Silicone Potting Compound:

* Targeted Thermal Management: Effectively lowers internal hotspot temperatures, delaying the aging of temperature-sensitive components like electrolytic capacitors.

* High-Reliability Encapsulation: Fully encapsulates components, eliminating short-circuit and corrosion risks caused by humidity and condensation.

* Excellent Flame Retardancy: The silicone rubber base provides a good level of fire safety.

* Strong Adhesion to Aluminum Substrates: Ensures efficient heat transfer to the heat sink housing.

* Adaptable to Automation: Suitable viscosity and pot life accommodate both manual and automated potting equipment.

Application Areas for Silicone Potting Compound:

* High-power LED street lights, industrial/mining lights, floodlights

* Outdoor landscape lighting LED drivers

* Plant growth light drivers

* Indoor LED lighting driver modules

Detailed Operating Guide for Silicone Potting Compound:

1. Component Installation: Ensure all components, especially electrolytic capacitors, are securely mounted on the PCB. The potting elastomer provides additional strain relief but cannot fix poor soldering.

2. Pre-warming & Stirring: In cold environments, pre-warm Component A to 25-30°C to reduce viscosity for easier potting and degassing. Always stir Component A before use.

3. Precise Mixing & Degassing: Mix uniformly at a 10:1 ratio, then vacuum degas. For populated PCBAs, short vacuum degassing of the entire unit after potting can help remove deep-seated bubbles.

4. Potting Technique: Pour the compound slowly along the edge of the housing, allowing it to flow and cover components naturally. Avoid direct impact on sensitive components or potentiometers.

5. Curing & Post-Processing: Cure at room temperature. Basic functional testing can be done after initial cure, but we recommend aging for at least 24 hours before full parameter and waterproof testing.

Key Precautions for Silicone Potting Compound:

* Protect Potentiometers & Connectors: If the driver has adjustable pots or open connectors, cover them with tape or protect with grease before potting to prevent ingress and failure.

* Electrolytic Capacitor Selection: Ensure selected electrolytic capacitors can withstand the slight stress potentially induced by the curing compound.

* Potting Fill Level: Recommend covering the tallest component by 1-2mm. Overfilling increases housing stress; underfilling provides insufficient protection.

* Do Not Heat Cure: Strictly avoid using ovens or other methods to accelerate curing.

Packaging & Storage for Silicone Potting Compound:

* Standard Packaging: 22kg/set (20kg A + 2kg B); 11kg/set (10kg A + 1kg B).

* Storage Conditions: Store in a cool, dry place away from direct sunlight.

* Shelf Life: 6 months in original, unopened containers from date of manufacture.

FAQ for Silicone Potting Compound:

1. Q: How much can potting reduce the power supply's temperature rise?

A: The exact value depends on structure, power, and heat sink design. In typical applications, by transferring heat to the外壳, core component temperatures can be reduced by over 10°C, which can multiply the driver's lifespan.

2. Q: How does it help with waterproofing?

A: Potting turns the entire board into a solid, sealed block, achieving IP67 or higher. We recommend full waterproof testing based on your housing design.

3. Q: How can a potted power supply be repaired?

A: The cured silicone is an elastomer. It can be carefully cut and peeled away using specialized tools or with localized heat from a hot air gun. It is feasible but requires care.

4. Q: How to choose between black and white for LED applications?

A: Black offers slightly better thermal conductivity and shielding, ideal for high-power, compact drivers. White provides light reflection, boosting internal light efficacy and offering a cleaner look.

5. Q: We have an automated potting line. Can you provide technical support?

A: Absolutely. Our technical engineers can assist with setting pump parameters, selecting static mixers, and optimizing the potting path for efficiency and yield. Please provide your equipment model.