Shenzhen Hanast New Material co.,LTD
| Payment Terms | T/T、paypal |
| Supply Ability | 100ton/month |
| Delivery Time | 5-7days |
| Packaging Details | 50KG/set, 25KG/bar |
| Pot Life (@25°C) | 0.3-0.4 hours |
| Initial Cure (@25°C) | 2-3 hours |
| Full Cure (@25°C) | 4-12 hours or (@80°C): 0.2 hours |
| Hardness (Shore A) | 45±5 |
| Viscosity | 2000-3000 mPa·S (A&B) |
| Mixing Ratio | 1:1 (by weight or volume) |
| Brand Name | Hanast |
| Model Number | HN-8806A/B |
| Certification | ROHS |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Hanast 10:1 Potting Compound Insulation And Moisture-Proof Potting AB Adhesive
Insulated Electrical Silicone Potting Compound Gel Flame Retardant Grey Liquid
Deep Curing Potting Silicone HN-8806A/B | Low Shrinkage, RoHS Compliant for
Electronic Rtv Silicone Potting Gel Compound Flexible Adhesive Waterproof
Product Specification
| Payment Terms | T/T、paypal | Supply Ability | 100ton/month |
| Delivery Time | 5-7days | Packaging Details | 50KG/set, 25KG/bar |
| Pot Life (@25°C) | 0.3-0.4 hours | Initial Cure (@25°C) | 2-3 hours |
| Full Cure (@25°C) | 4-12 hours or (@80°C): 0.2 hours | Hardness (Shore A) | 45±5 |
| Viscosity | 2000-3000 mPa·S (A&B) | Mixing Ratio | 1:1 (by weight or volume) |
| Brand Name | Hanast | Model Number | HN-8806A/B |
| Certification | ROHS | Place of Origin | Guangdong, China |
| High Light | low shrinkage silicone potting compound ，precision electronic packaging silicone ，silicone potting compound with warranty | ||
Product Overview for silicone potting compound:
HN-8806, two-component addition type silicone potting rubber which can be cured into high-performance elastomer by room temperature or heating. This potting silicone rubber has excellent electrical insulation, high moisture resistance, and a wide temperature range of -50°C to 250°C. Low-viscosity potting compound that Will cure in deep sections. Low shrinkage rate after curing, will not emit heat and by-products, no corrosion for filling and sealing components. No pollution in the surrounding environment, Complying with RoHs standards. Its good thermal conductivity function can effectively transfer the heat emitted by the electronic components.
Key Features for silicone potting compound:
1.Fast Initial Cure (2-3hr 25°C)
2.Heat Acceleration Possible
3.Suitable Pot Life
4.Good Flowability
5.1:1 Mix Ratio.
Technical Parameters for silicone potting compound:
| 2-3 hours | 0.3-0.4 hours |
| Initial Cure (25°C) | 2-3 hours |
| Full Cure (25°C) | 4-12 hours or (80°C): 0.2 hours |
| Hardness (Shore A) | 45±5 |
| Viscosity | 2000-3000 mPa·S (A&B) |
| Mixing Ratio | 1:1 (by weight or volume) |
Product Applications for silicone potting compound:
1.Consumer Electronics: Protects power adapters, smart home controllers, and power bank PCBs.
2.Low/Medium-Volume Manufacturing: Adapts to R&D pilot runs, small-batch orders, and repair/rework.
3.Fast-Paced Production Lines: Optimizes electronics potting for high-throughput, quick-turnaround schedules.
Usage Instructions for silicone potting compound:
1. When used, mix A and B components evenly, and then weigh A and B components according to proportion. Mix thoroughly and evenly with a clean stirring device in a clean container, and then potting can be done. It can also be sealed under a vacuum after removing the bubbles.
2. The surface of the potting element needs to be cleaned. If the potting product is too large, it is recommended to potting in stages and then cure at room temperature (4-12hr) or by heating (80ºC-0.5hr).
3. For the automatic potting production line, in order to ensure accurate mixing ratio of A and B, Part A and Part B should be vacuumed respectively to remove the bubbles (the foaming time is 5-10 minutes), and then A and B should be pumped to the static mixer in proportion with a metering pump, and then potting can be done after mixing evenly.
Packaging & Storage for silicone potting compound:
10KG / Set (A, 5kg + B, 5kg) 20KG / Set (A, 10kg + B, 10kg) 50KG / Set (A, 25kg + B, 25kg)
Storage and transportation:This product is non-toxic non-dangerous goods, according to the general chemical handling, stored in a cool & dry place (room temperature).
FAQ for silicone potting compound:
Q: Can the part be moved after initial cure?
A: Yes, after initial cure, the part has sufficient strength for careful handling and light subsequent operations.
Q: How can I cure it faster?
A: Heating at 80°C for 0.2 hours (approx. 12 mins) achieves full cure.
Q: Does the compound harden immediately after the pot life?
A: No, it begins to thicken and enter the curing stage gradually, but completion within the pot life is recommended.
Q: Does fast curing mean a shorter shelf life?
A: No, cure speed and shelf life are separate. The unmixed components have a 6-month shelf life.
Q: Can heat curing damage my components?
A: 80°C is safe for most components. Evaluate or choose room temperature cure if extremely heat-sensitive parts are present.
Company Details
Business Type:
Manufacturer,Agent,Trading Company
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
.gtr-container-d4e7f0 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; } .gtr-container-d4e7f0 p { font-size: 14px; margin-bottom: 1em; text-align: left !important; word-break: normal; overflow-wrap: normal; } ... .gtr-container-d4e7f0 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; } .gtr-container-d4e7f0 p { font-size: 14px; margin-bottom: 1em; text-align: left !important; word-break: normal; overflow-wrap: normal; } ...
Get in touch with us
Leave a Message, we will call you back quickly!