Shenzhen Hanast New Material co.,LTD
| Payment Terms | T/T、paypal |
| Supply Ability | 50ton/month |
| Delivery Time | 5-7days |
| Packaging Details | 22kg/set (20kg A + 2kg B); 11kg/set (10kg A + 1kg B) |
| Pot Life (25°C): | 40-60 minutes – Provides ample working time. |
| Viscosity (Mixed) | 2000-2600 cP – Good flow for easy filling, yet resistant to spillage |
| Mix Ratio: 10:1 | A forgiving process window, less sensitive to ratio errors, easy to control. |
| Curing Profile | Cures at room temperature, no extra equipment needed – Simplifies the process. |
| Hardness (Shore A) | 30-40 – Moderate elasticity, facilitates subsequent rework. |
| Brand Name | Hanast |
| Model Number | HN-8808A/B |
| Certification | ROHS |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Hanast 10:1 Potting Compound Insulation And Moisture-Proof Potting AB Adhesive
Insulated Electrical Silicone Potting Compound Gel Flame Retardant Grey Liquid
Deep Curing Potting Silicone HN-8806A/B | Low Shrinkage, RoHS Compliant for
Electronic Rtv Silicone Potting Gel Compound Flexible Adhesive Waterproof
Product Specification
| Payment Terms | T/T、paypal | Supply Ability | 50ton/month |
| Delivery Time | 5-7days | Packaging Details | 22kg/set (20kg A + 2kg B); 11kg/set (10kg A + 1kg B) |
| Pot Life (25°C): | 40-60 minutes – Provides ample working time. | Viscosity (Mixed) | 2000-2600 cP – Good flow for easy filling, yet resistant to spillage |
| Mix Ratio: 10:1 | A forgiving process window, less sensitive to ratio errors, easy to control. | Curing Profile | Cures at room temperature, no extra equipment needed – Simplifies the process. |
| Hardness (Shore A) | 30-40 – Moderate elasticity, facilitates subsequent rework. | Brand Name | Hanast |
| Model Number | HN-8808A/B | Certification | ROHS |
| Place of Origin | Guangdong, China | ||
| High Light | silicone potting compound for power modules ，electrical insulation silicone potting ，silicone potting compound for inverters | ||
Product Overview for Silicone Potting Compound:
HN-8808, two parts, low viscosity potting compound that cures at room temperature to soft pliable rubber. 1. This potting silicone rubber has high moisture resistance and a wide temperature range of - 57°C to 250°C.
Key Performance Parameters for Silicone Potting Compound:
1. Pot Life (25°C): 40–60 minutes — Delivers an extended processing window for continuous assembly.
2. Mixed Viscosity: 2000–2600 cP — Optimizes self-leveling penetration while resisting run-off.
3. Mix Ratio: 10:1 — Lowers sensitivity to scaling errors, enhancing production yield.
4. Curing Profile: Ambient cure — Negates the need for ovens, reducing energy and capital costs.
5. Post-Cure Hardness: 30–40 Shore A — Yields moderate elasticity to optimize post-assembly reworkability.
Product Highlights for Silicone Potting Compound:
1.Condensed liquid silicone rubber does not use polar compounds as raw materials, and does not release by-products during cross-linking, and can maintain better electrical properties under harsh conditions.
2. Non-toxic, odorless, non-corrosive, non-swelling.
3. It has adhesive force, has adhesion to metal aluminum, iron, acrylic, and PC plastic, and can improve waterproof sealing performance.
Application Areas for Silicone Potting Compound:
Widely used in sealing, electrical, potting, insulation, antifouling, waterproof, shockproof, coating, electronic appliances, and comprehensive household appliances.
Detailed Operating Guide (Manual Operation Focus) for Silicone Potting Compound:
1. Tool Prep: Ready two clean plastic/paper cups and a high-precision scale.
2. Tare Weighing: Place cup, tare, and add 100g of Part A. Tare again, then add 10g of Part B to eliminate container error.
3. "Figure-8" Mix: Use a flat-head stirrer. Mix slowly in a figure-8 pattern for 3 full minutes, scraping the sides and bottom thoroughly.
4. Simple Degassing: If lacking a vacuum, let sit for a few minutes. Pop surface bubbles with a toothpick or a light pass of hot air.
5. Corner Pour: Pour into a single corner to allow natural self-leveling. For tall parts, fill halfway, let gel slightly, then fill to the top to prevent trapped air.
Packaging & Storage for Silicone Potting Compound:
1. Standard Packaging: 22kg/set; 11kg/set. Smaller packages suit flexible production needs.
2. Storage Conditions: Store in a cool, dry place.
3. Shelf Life: 6 months in original, unopened containers from date of manufacture.
Company Details
Business Type:
Manufacturer,Agent,Trading Company
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
.gtr-container-d4e7f0 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; } .gtr-container-d4e7f0 p { font-size: 14px; margin-bottom: 1em; text-align: left !important; word-break: normal; overflow-wrap: normal; } ... .gtr-container-d4e7f0 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; } .gtr-container-d4e7f0 p { font-size: 14px; margin-bottom: 1em; text-align: left !important; word-break: normal; overflow-wrap: normal; } ...
Get in touch with us
Leave a Message, we will call you back quickly!