Shenzhen Hanast New Material co.,LTD
| MOQ | 1-2KG |
| Color | Transparent,black |
| Feature | Non-toxic, odorless, non-corrosive |
| Application | EV battery packs ECU modules |
| Specific Gravity (23℃) | 0.98 |
| Strength of Breakdown Voltage (kv / mm) | 18-25 |
| Hardness | 25A |
| Delivery Time | 5-7days |
| Viscosity (before curing) (mPa.S） | A：2000 B:50 |
| Thermal Conductivity (w / m.k) | 0.1-0.2 |
| Payment Terms | T/T、paypal |
| Packaging Details | 22kg/set (20kg A + 2kg B); 11kg/set (10kg A + 1kg B) |
| Name | RTV Potting Compound |
| Supply Ability | 50ton/month |
| Certification | ROHS |
| Place of Origin | Guangdong, China |
| Model Number | HN-8808A/B |
| Brand Name | Hanast |
View Detail Information
Explore similar products
Hanast 10:1 Potting Compound Insulation And Moisture-Proof Potting AB Adhesive
Two Parts Silicone Potting Compound 10:1 For Electronic Appliances Clear Potting
Insulated Electrical Silicone Potting Compound Gel Flame Retardant Grey Liquid
Deep Curing Potting Silicone HN-8806A/B | Low Shrinkage, RoHS Compliant for
Product Specification
| MOQ | 1-2KG | Color | Transparent,black |
| Feature | Non-toxic, odorless, non-corrosive | Application | EV battery packs ECU modules |
| Specific Gravity (23℃) | 0.98 | Strength of Breakdown Voltage (kv / mm) | 18-25 |
| Hardness | 25A | Delivery Time | 5-7days |
| Viscosity (before curing) (mPa.S） | A：2000 B:50 | Thermal Conductivity (w / m.k) | 0.1-0.2 |
| Payment Terms | T/T、paypal | Packaging Details | 22kg/set (20kg A + 2kg B); 11kg/set (10kg A + 1kg B) |
| Name | RTV Potting Compound | Supply Ability | 50ton/month |
| Certification | ROHS | Place of Origin | Guangdong, China |
| Model Number | HN-8808A/B | Brand Name | Hanast |
| High Light | 10:1 silicone potting compound for EV batteries ，two-component potting compound for ECU modules ，high-performance electrical insulation silicone compound | ||
10:1 Two-Component Silicone Potting Compound For For EV Battery Packs ECU Modules High-Performance Electrical Insulation And Protection
Product description of silicone potting compound:
In the electronics industry, 10:1 silicone potting compounds are defined as the ultimate barrier for "three-proofing" (protection against moisture, salt spray, and mold) and thermal management. They possess three core functions: Electrical Insulation and Dielectric Protection—featuring exceptionally high dielectric strength, they completely isolate circuits from external moisture and conductive dust, thereby preventing high-voltage breakdown and short circuits. Thermal Stress Relief—as automotive and consumer electronics generate significant heat during operation, alternating cycles of heating and cooling cause components to undergo thermal expansion and contraction; the superior flexibility of the 10:1 compound absorbs this deformation, preventing solder joints from being fractured. Extreme Environment Resistance (Ultra-Wide Temperature Range)—capable of maintaining their physical elasticity and electrical performance over the long term—without degradation—across an extreme temperature range of -50°C to 200°C (or even higher).
Technical Parameters of 10:1 Silicone Encapsulant
| № | Itrems | Technique Request |
| 1 | Appearance |
Transparent, White, Black Flowing Liquid |
| 2 | Viscosity (before curing) (mPa.S) | A:2000 B:50 |
| 3 | Specific Gravity (23℃) | 0.98 |
| 4 | Available Time (h, 25℃) | 1-2h |
| 5 | Entirely Cure Time (h, 25℃) | 8-12h |
| 6 | Shaw Hardness (JIS A) | 25A |
| 7 | Volume Resistivity (Ω cm) | ≥1×1014 |
| 8 | Strength of Breakdown Voltage (kv / mm) | 18-25 |
| 9 | Dielectric Constant (1MHZ) | 2.5 - 3.0 |
| 10 | Dielectric Loss Angle Tangent (1MHZ) | ≤4×10-3 |
| 11 | Thermal Conductivity (w / m.k) | 0.1 - 0.20 |
Main features of Silicone Potting Compound:
Hardness:25 shore A
Mix raio:10:1
Color:transparent
Viscosity (before curing) (mPa.S):A:2000 B:50
wide temperature range:- 57°C to 250°C
Application Areas for Silicone Potting Compound:
Consumer Electronics;LED Lighting & Power Supplies;Automotive Electronics etc
How to use 10:1silicone potting compound?
According to the dosage, pour it into the mold after mixing according to A: B=10:1.
Remove the surface bubbles and cure at room temperature (the proportion can be adjusted according to actual needs, the larger the proportion of component B, the faster the curing).
Company Details
Business Type:
Manufacturer,Agent,Trading Company
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
About Us | China RTV-2 Liquid Silicone & Potting Compound Manufacturer .gtr-container-d4e7f0 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; } .gtr-container-d4e7f0 p { font-si... About Us | China RTV-2 Liquid Silicone & Potting Compound Manufacturer .gtr-container-d4e7f0 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; } .gtr-container-d4e7f0 p { font-si...
Get in touch with us
Leave a Message, we will call you back quickly!