Shenzhen Hanast New Material co.,LTD
| Payment Terms | T/T |
| Packaging Details | 25KG/ Iron Drum |
| Type | two parts potting material |
| temperature range | - 57°C to 250°C |
| Feature | Non-toxic, odorless, non-corrosive, non-swelling |
| Application | sealing, electrical, potting, insulation electronic appliances |
| Appearance | Transparent, White, Black Flowing Liquid |
| Viscosity (before curing) (mPa.S） | A：2000 B:50 |
| Shaw Hardness (JIS A) | 25 shore A |
| Mix ratio | 10：1 |
| Dielectric Constant (1MHZ) | 2.5 - 3.0 |
| Thermal Conductivity (w / m.k) | 0.1 - 0.20 |
| Brand Name | Hanast |
| Model Number | HN-8808 |
| Certification | ROHS，SGS |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Hanast 10:1 Potting Compound Insulation And Moisture-Proof Potting AB Adhesive
Insulated Electrical Silicone Potting Compound Gel Flame Retardant Grey Liquid
Electronic Rtv Silicone Potting Gel Compound Flexible Adhesive Waterproof
LED Encapsulation Silicone Potting Compound Gel For Electrical Insulation
Product Specification
| Payment Terms | T/T | Packaging Details | 25KG/ Iron Drum |
| Type | two parts potting material | temperature range | - 57°C to 250°C |
| Feature | Non-toxic, odorless, non-corrosive, non-swelling | Application | sealing, electrical, potting, insulation electronic appliances |
| Appearance | Transparent, White, Black Flowing Liquid | Viscosity (before curing) (mPa.S） | A：2000 B:50 |
| Shaw Hardness (JIS A) | 25 shore A | Mix ratio | 10：1 |
| Dielectric Constant (1MHZ) | 2.5 - 3.0 | Thermal Conductivity (w / m.k) | 0.1 - 0.20 |
| Brand Name | Hanast | Model Number | HN-8808 |
| Certification | ROHS，SGS | Place of Origin | Guangdong, China |
| High Light | RTV Silicone Potting Compound ，Insulation Silicone Potting Compound ，RTV silicone potting material | ||
Factory Supply 2 Part RTV Silicone Led Module Potting Insulation Waterproof Silicone Potting Material 10:1 Electronic clear Potting Compound
HN-8808AB is a two-component condensation type room temperature curing silicone rubber, also known as RTV 2 Liquid Silicone Rubber, composed of two parts of A and B. After the A and B components are mixed at 10:1 (mixed ratio), they solidify into a high-performance elastomer through a condensation reaction.
Product Features
1) Good adhesion, no corrosion
2) solid Small chemical shrinkage,
3) no heat release, good insulation,
4) wide temperature range (-50℃-200℃),
5) waterproof and moisture-proof
Main Application
It is mainly used in circuit boards, LED power supplies, automotive electronic modules, power module.
Technical Sheet
| Before Mixing | ||
| A | B | |
| Exterior | black liquid | Transparent liquid |
| Base chemical composition | Polysiloxane | Polysiloxane |
| Viscosity (cP) (GB/2794-1995) | 2000-2800 | 20-30 |
| Density (g/cm³) (GB/2794-1995) | 1.42±0.02 | - |
| A+B after mixing | ||
| Exterior | black liquid | |
| Base chemical composition | Polysiloxane (Silicone) | |
| Viscosity (cP) (GB/2794-1995) | 2000-2600mpa's | |
| Density (g/cm³) (GB/2794-1995) | 1.40±0.02 | |
| Operating time (25℃, min) | 40-60 | |
| Curing time (25℃, h) | 4-6 | |
| Hardness (shore A) (GB/T531-1999) | 30-40 | |
| Volume resistivity Ω·cm (GB/T 31838.2-2019) | ≥5.0×10 14 |
| Thermal conductivity (W/M▪K) (GB/T 38712-2020) | 0.5±0.1 |
| Dielectric strength (kv/mm) | ≥14 |
| Dielectric constant | ≤3.5 |
| Elongation at break (%) | ≤100% |
Packaging Method
22kg/set (component A 20kg + component B 2kg)
11kg/set (component A 10kg + component B 1kg)
Attention
1. The rubber material should be sealed and stored. Use the mixed glue at one time to avoid waste.
2. 10:1 colloid cannot be heated to accelerate solidification after mixing.
3. This product is a non-dangerous product, but please keep it out of your mouth and eyes.
4. This product is non-toxic and non-dangerous. Avoid rain and exposure. Store in a cool and dry place. The shelf life is6months (best use period3 within months)
Company Details
Business Type:
Manufacturer,Agent,Trading Company
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Shenzhen Hanaste New Materials Co., Ltd. is a subsidiary of Shenzhen Kanglibang Technology Co., Ltd. The brand "Hanast", established in 2019, has been dedicated to expanding the international market. The company is committed to the research and development and innovation of new adhesive ma... Shenzhen Hanaste New Materials Co., Ltd. is a subsidiary of Shenzhen Kanglibang Technology Co., Ltd. The brand "Hanast", established in 2019, has been dedicated to expanding the international market. The company is committed to the research and development and innovation of new adhesive ma...
Get in touch with us
Leave a Message, we will call you back quickly!