Shenzhen Hanast New Material co.,LTD
| Payment Terms | T/T |
| Packaging Details | 25KG/barrel |
| Weight ratio | 1:1 |
| Hardness after cure | 50±5 shore A |
| Thermal conductivity | Can be customized |
| Waterproof | Yes |
| Dielectric intensity | 18~25Kv/mm(25ºC) |
| Temperature Resistance | -50~+250ºC |
| Color | black,white,clear,grey |
| Shelf time | 6months |
| Keywords | waterproofing electronics with silicone |
| Operation time | 3-4h |
| Brand Name | Hanast |
| Model Number | HN-8806AB |
| Certification | ROHS SGS |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Hanast 10:1 Potting Compound Insulation And Moisture-Proof Potting AB Adhesive
Insulated Electrical Silicone Potting Compound Gel Flame Retardant Grey Liquid
Deep Curing Potting Silicone HN-8806A/B | Low Shrinkage, RoHS Compliant for
Electronic Rtv Silicone Potting Gel Compound Flexible Adhesive Waterproof
Product Specification
| Payment Terms | T/T | Packaging Details | 25KG/barrel |
| Weight ratio | 1:1 | Hardness after cure | 50±5 shore A |
| Thermal conductivity | Can be customized | Waterproof | Yes |
| Dielectric intensity | 18~25Kv/mm(25ºC) | Temperature Resistance | -50~+250ºC |
| Color | black,white,clear,grey | Shelf time | 6months |
| Keywords | waterproofing electronics with silicone | Operation time | 3-4h |
| Brand Name | Hanast | Model Number | HN-8806AB |
| Certification | ROHS SGS | Place of Origin | Guangdong, China |
| High Light | SGS Silicone Potting Compound ，Electronics Insulation Silicone Potting Compound ，SGS liquid silicone gel for electronics | ||
Two-Component RTV Potting Silicone Rubber Electrical Insulation Silicone Potting Compound High Thermal Conductivity For Battery Pack Adapter Led Driver
HN-8806, two-components addition type silicone potting rubber which can be cured into high-performance elastomer by room temperature or heating.
Its good thermal conductivity function can effectively transfer the heat emitted by the electronic components.
Application of RTV Potting Silicone Rubber
This product is widely used in the potting and sealing of electronic components, such as various power modules, circuit boards, high-voltage transformers, battery packs, fast-charging adapters
Silicone potting compounds are indispensable key materials in the electronics industry and high-end manufacturing. Their core functions include protection, insulation, heat dissipation, and support. Their applications extend to almost all areas requiring circuit protection and environmental sealing.
Technical Parameters of RTV Potting Silicone Rubber
| Test Items | Test Standard | Units | Product test results | |||
| Part A | Part B | |||||
|
Before Curing
| 1 | Appearance | By eyes | --- | Grey, fluid | White, fluid |
| 2 | Viscosity | GB/T10247- 2008 | 25ºC,mPa·S | 4500~5000 | 4500~5000 | |
| 3 | Density | GB/T 13354-92 | 25ºC,g/cm3 | 1.50±0.05 | 1.50±0.05 | |
| 4 | Mixing Ratio (A : B) | 1:1 | Weight ratio | 100 | 100 | |
| Volume ratio | 100 | 100 | ||||
| 5 | Operating time | Measured | hr | 0.3-0.4 | ||
| 6 | Curing condition | Measured | hr | 4~12 (25ºC, initial cure) | ||
| 0.20 (80ºC) | ||||||
| After Curing
| 7 | Appearance | By eyes | --- | Grey Elastomer | |
| 8 | Hardness | GB/T 531.1-2008 | Shore A | 50±5 | ||
| 9 | Thermal conductivity | GB/T10297-1998 | w/m·k | ≥0.76 | ||
| 10 | Expansivity | GB/T20673-2006 | µm/(m,ºC) | 210 | ||
| 11 | Moisture Absorption | GB/T 8810-2005 | 24h,25ºC,% | 0.01~0.02 | ||
| 12 | Volume resistivity | GB/T 1692-92 | (DC500V),Ω· cm | 1.0×1016 | ||
| 13 | Dielectric intensity | GB/T 1693-2007 | Kv/mm(25ºC) | 18~25 | ||
| 14 | Temperature Resistance | Measured | ºC | -50~+250 | ||
How to use RTV Potting Silicone Rubber
1. When used, mix A and B components evenly, and then weigh A and B components according to proportion. Mix thoroughly and evenly with a clean stirring device in a clean container, and then potting can be done. It can also be sealed under a vacuum after removing the bubbles. 2. The surface of the potting element needs to be cleaned. If the potting product is too large, it is recommended to potting in stages and then cure at room temperature (4-12hr) or by heating (80ºC-0.5hr). 3. For the automatic potting production line, in order to ensure accurate mixing ratio of A and B, Part A and Part B should be vacuumed respectively to remove the bubbles (the foaming time is 5-10 minutes), and then A and B should be pumped to the static mixer in proportion with a metering pump, and then potting can be done after mixing evenly.
About us
Company Details
Business Type:
Manufacturer,Agent,Trading Company
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
.gtr-container-d4e7f0 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; } .gtr-container-d4e7f0 p { font-size: 14px; margin-bottom: 1em; text-align: left !important; word-break: normal; overflow-wrap: normal; } ... .gtr-container-d4e7f0 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; } .gtr-container-d4e7f0 p { font-size: 14px; margin-bottom: 1em; text-align: left !important; word-break: normal; overflow-wrap: normal; } ...
Get in touch with us
Leave a Message, we will call you back quickly!