Shenzhen Hanast New Material co.,LTD
| Payment Terms | T/T, D/A, D/P |
| Packaging Details | 25KG/barrel |
| Hardness | Shore D 80 |
| Electrical Insulation | High |
| Operating Temperature | -40°C to 150°C |
| Flame Retardant | UL 94 V-0 |
| Thermal Conductivity | 0.8 W/m·K |
| Dielectric Strength | 500 V/mil |
| Chemical Resistance | Excellent |
| Cure Time | 24 hours |
| Density | 1.71±0.05，g/cm3 |
| Color | Transparent |
| Shrinkage | Less than 0.1% |
| Viscosity | 1000 cps |
| Appearance | Liquid |
| Mix Ratio | 5:1 |
| Adhesion Strength | 500 psi |
| Brand Name | Hanast |
| Model Number | HN-5508AB |
| Certification | ROHS SGS |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Vulcanizing Transparent Electrical Clear Potting Epoxy Silicon Gel Shockproof
Heat Curing Silicone Epoxy Potting Compound Material For Encapsulation
Electronic Raw Silicone Material Low Viscosity Potting Compound Glue 2 Component
Two Component Epoxy Potting Compound Resin Thermal Conductive Clear Black Liquid
Product Specification
| Payment Terms | T/T, D/A, D/P | Packaging Details | 25KG/barrel |
| Hardness | Shore D 80 | Electrical Insulation | High |
| Operating Temperature | -40°C to 150°C | Flame Retardant | UL 94 V-0 |
| Thermal Conductivity | 0.8 W/m·K | Dielectric Strength | 500 V/mil |
| Chemical Resistance | Excellent | Cure Time | 24 hours |
| Density | 1.71±0.05，g/cm3 | Color | Transparent |
| Shrinkage | Less than 0.1% | Viscosity | 1000 cps |
| Appearance | Liquid | Mix Ratio | 5:1 |
| Adhesion Strength | 500 psi | Brand Name | Hanast |
| Model Number | HN-5508AB | Certification | ROHS SGS |
| Place of Origin | Guangdong, China | ||
| High Light | potting epoxy resin Raw Material ，RTV 2 potting epoxy resin ，clear potting compound Raw Material | ||
Two Component 10:1 RTV 2 Clear Potting Epoxy Resin Silicone Compound Encapsulant Raw Material For LED Driver
Product description:
HN-5508 is widely used in transformers, resistors, filters, temperature sensors, temperature controllers, ignition coils, high voltage packs, aquarium equipment, anion generators, ultrasonic atomizers, and electronics and other components that require insulation, flame retardant, and temperature resistance. It has flame retardant insulation, sealing bonding, moisture-proof earthquake resistance, temperature resistance, and other main functions.
Electrical Insulation: Excellent dielectric properties, ensuring reliable circuit protection.
Environmental Resistance: Withstands moisture, chemicals, and thermal stress for long-term durability.
Structural Integrity: Enhances mechanical strength and vibration resistance after curing.
| Before curing | builder | Epoxy resin 5508 | Curing agent 5508 |
| pigment | Black / White et al | Ruburn / transparent surface | |
| A sticky epoxy resin water | r liquid specific | ||
| c gravity, g / cm3 | 1.4-1.5 | 1.05 | |
| Viscosity of 25℃ | 4,500—6,000cp s | 150—250cp storage | |
| e Period (25℃) | Six months | x months | |
|
processabili
| mixing ratio | A: B =5:1 (weight ratio) | |
| Available for a time of 25℃ | 2-3H (100g mix) | ||
| curing time | 25℃ / 6-8H surface stem, 12-16H fully cured or 60-80℃/1.5-2H | ||
| After curing | 2 Tensile strength of kg/cm | 16-18 | |
| 2 Compressive strength of kg/cm | 18-22 | ||
| Resistance to the voltage of kv/mm | 20-22 | ||
| Surface resistance ofΩ-cm | 14 1.2*10 | ||
| Volume resistance ofΩ-cm | 15 1.1*10 | ||
| contraction percentage% | 0.35-0.55 | ||
| Water absorption rate was 25℃ * 24H | <0.03% | ||
| The hardness of SHORE A | 85-95 |
| distortion temperature ℃ | 130-150 |
| low temperature resistant ℃ | -30
|
storage and transportation
1. Store in a cool and dry place with a storage period of 6 months (25℃).
2. Products beyond the storage period should be confirmed whether there are any abnormalities before being used.
3. Parts A and B of the colloid must be sealed and preserved, with careful leakage during transportation!
4. These kinds of products are non-dangerous goods and can be transported as general chemicals.
Product application:
Company Details
Business Type:
Manufacturer,Agent,Trading Company
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Shenzhen Hanast New Materials Co., Ltd. is a subsidiary of Shenzhen Kanglibang Technology Co., Ltd. The brand "Hanast", established in 2019, has been dedicated to expanding the international market. The company is committed to the research and development and innovation of new adhesive mat... Shenzhen Hanast New Materials Co., Ltd. is a subsidiary of Shenzhen Kanglibang Technology Co., Ltd. The brand "Hanast", established in 2019, has been dedicated to expanding the international market. The company is committed to the research and development and innovation of new adhesive mat...
Get in touch with us
Leave a Message, we will call you back quickly!