Silicone Rubber Vibration Isolation Mount Anti-Vibration Damper for Industrial

Our silicone rubber vibration isolation mounts deliver premium shock absorption and noise dampening for industrial machinery, HVAC systems, generator sets, and precision equipment. Manufactured with high-performance silicone elastomer, these mounts isolate vibration energy, extend equipment service life, and reduce structural noise transmission. Available in cylindrical, conical, sandwich, and custom bushing designs with optional metal thread inserts.

• Industrial Machinery & Presses – Vibration dampening for stamping presses, CNC machining centers, injection molding machines, and conveyor drive units to protect factory floors and adjacent equipment.
• HVAC & Air Handling Systems – Isolation mounts for air handling units (AHU), chillers, cooling towers, and rooftop condenser fans to eliminate structure-borne noise in commercial buildings.
• Generator & Engine Mounts – Diesel generator set vibration isolation, marine engine bedding mounts, and portable power equipment shock absorbers for reduced cabin noise and component wear.
• Pump & Compressor Stations – Centrifugal pump base isolation, reciprocating compressor foot mounts, and vacuum pump damping pads for piping stress relief and noise compliance.
• Laboratory & Medical Equipment – Precision vibration isolation for electron microscopes, analytical balances, MRI scanner support, and optical table leveling mounts requiring micro-vibration control.
• Railway & Transportation – Bogie suspension bushings, cabin floor isolation pads, and electric vehicle battery pack shock mounts for passenger comfort and component protection.

• Material Certification: All silicone compounds sourced from ISO 9001 certified suppliers with full batch traceability – virgin material certificates provided with every shipment confirming Shore A hardness, tensile strength, and elongation values.
• Dimensional Control: 100% first-article inspection (FAI) on new molds with CMM coordinate measurement (±0.05 mm accuracy); in-process dimensional sampling every 2 hours during production runs.
• Performance Testing: Each production lot tested for static load deflection curve, dynamic stiffness measurement, natural frequency identification via FFT analysis, and compression set after thermal aging per ASTM D395.
• Visual & Cosmetic QC: 100% visual inspection for surface defects (flash, flow marks, air traps, contamination) under 500 lux illumination. AQL 1.0 Level II sampling for final shipment release.
• Certifications: ISO 9001:2015 certified production facility; material compliance with RoHS 2.0, REACH SVHC, and California Proposition 65 upon request.

• Primary Packaging: Individual mounts wrapped in anti-static PE foam sheet, then packed in clean PE polybags (10-50 pcs/bag depending on size) with heat-sealed closure to prevent contamination during transit.
• Secondary Carton: 5-ply export-grade corrugated cartons (burst strength ≥ 12 kgf/cm²) with honeycomb paperboard dividers to separate individual mounts and prevent surface abrasion during container handling.
• Threaded Insert Protection: Metal thread inserts protected with PE caps to prevent thread damage during shipping; mounts with exposed metal parts receive VCI (Volatile Corrosion Inhibitor) paper wrap for rust prevention.
• Palletization: Cartons stacked on ISPM-15 heat-treated wooden pallets, corner-boarded, stretch-wrapped (minimum 3 layers), and secured with PET strapping for ocean freight stability.
• Custom Labeling: Carton markings include product PN, quantity, net/gross weight, lot number, and shipping mark per customer purchase order requirements. Barcode labeling (Code 128 or QR) available for warehouse scanning integration.

• Engineering Consultation: Our application engineers provide free vibration analysis and mount selection guidance based on your equipment weight, operating frequency, and isolation efficiency targets – response within 24 hours.
• Warranty Coverage: 18-month limited warranty against manufacturing defects and premature fatigue failure under specified load and frequency conditions. Replacement or credit issued within 5 working days of verified claim.
• Installation Support: Detailed installation drawings, torque specifications for threaded mounts, and video guides provided with every order. Remote video call support available for complex installations.
• Order Progress Tracking: Weekly production status updates with in-line photos and QC checkpoint reports shared via email or WhatsApp; pre-shipment inspection report sent for customer approval before dispatch.
• Long-Term Supply Assurance: Production molds stored and maintained for minimum 5 years after last order; repeat orders processed within 10 working days with guaranteed formulation consistency.

• Manufacturing Facility: 8,000+ m² integrated production complex housing silicone rubber molding workshop, metal insert fabrication department, and in-house mold design & CNC machining center.
• Production Equipment: 20+ compression molding presses (50T-300T), 8 injection molding machines, 3 LSR (Liquid Silicone Rubber) injection systems, 5 CNC machining centers, and dedicated metal insert tapping & threading stations.
• Testing Laboratory: In-house mechanical testing lab equipped with universal tensile tester (5 kN), Shore durometer stations (A/D types), dynamic mechanical analyzer (DMA), compression set fixtures, and thermal aging ovens calibrated to ASTM/ISO standards.
• Monthly Output: 300,000+ vibration isolation mounts across all configurations; 50+ new mold sets designed and fabricated per month with typical 5-7 day lead time for prototype tooling.
• Workforce: 150+ skilled professionals including 12 mechanical & mold design engineers, 8 dedicated QC inspectors, and 6-member international sales team fluent in English and Spanish.
• Custom Mold Service: In-house 3D mold flow simulation and DFM (Design for Manufacturability) analysis included with every new project to optimize gate location, venting, and cure time before steel is cut.

Our engineering team provides free application analysis. Simply provide your equipment weight (static load per mount point), operating RPM/frequency, desired isolation efficiency (%), and available mounting space. We will recommend the optimal Shore hardness, mount geometry, and threaded insert configuration within 24 hours.

Absolutely. We specialize in full custom OEM solutions. Send your 2D/3D drawing (STEP, IGES, DWG, or PDF) or even a dimensional sketch, and our engineers will perform mold flow simulation and DFM review before producing prototype tooling within 5-7 working days.

Standard MOQ is 50 pieces per design. For prototype evaluation, we accept as few as 10 pieces with aluminum prototype tooling at reduced tooling cost – credited back on first production order over 2,000 pieces.

Yes, we bond metal threaded inserts (M4 to M16) directly into the silicone during the molding process for a permanent vulcanized bond. Standard materials are 304 stainless steel and brass; custom grades (316 SS, carbon steel with zinc plating) available upon request.

Yes. Send us a reference sample and your application requirements, and our lab will reverse-engineer the hardness, geometry, and load-deflection curve to produce an equivalent or improved replacement. We also provide FEA dynamic simulation reports for validation before production.

Every shipment includes a Certificate of Conformance (CoC) referencing the purchase order number, material batch certificates, dimensional inspection report (CMM data), and Shore hardness test results. Third-party SGS/Intertek testing reports available at customer's request and cost.

We maintain buffer stock of standard Shore A compounds and metal insert components. Rush production (3-5 working days) is available for urgent requirements at a 15% expedite surcharge. Dedicated production line scheduling and priority mold changeover ensure minimal delivery delay.