Round EPDM Rubber Anti Vibration Isolation Pads 60mm Cylindrical Feet for

Product Description:

These round EPDM anti vibration pads are plain cylindrical feet with no stud, screw or insert, so they simply sit under a machine frame, cabinet or compressor base and are held in place by the weight of the equipment plus the high friction ribbed base. Nothing has to be drilled into the floor or the frame, which makes them the fastest way to isolate vibration on rented premises or movable equipment.

Each pad is compression moulded from 60 Shore A EPDM compound, cured in a temperature controlled oven and trimmed by CNC. The grooved top and bottom faces grip steel, concrete, tile and epoxy floors, and the closed cell surface resists water, dust and most dilute chemicals.

Application Scenarios:

• HVAC equipment: air handling units, fan coil units, duct silencers and condensing units
• Refrigeration and air compressor skids, chiller frames and cold room machinery
• Industrial pumps, vacuum pumps, blowers and cooling towers
• Workshop machinery: bench grinders, welding sets, packaging lines and conveyor frames
• Electrical cabinets, generator enclosures and transformer bases
• Commercial kitchen and laundry equipment such as dishwashers and industrial dryers
• Laboratory and medical instruments that need levelling on uneven floors

Simple Parameters:

Quality Assurance:

Quality is controlled from incoming compound to final carton. Every batch of EPDM compound is tested for hardness, tensile strength and elongation before it reaches the press, and each production lot is sampled for compression set, rebound resilience and dimensional accuracy.

• ISO 9001:2015 certified quality management system
• Raw material RoHS and REACH declarations available for every batch
• 100 percent visual inspection plus AQL 1.0 sampling on dimensions and hardness
• Compression set under 25 percent after 24 hours at 70 C, rebound resilience above 45 percent
• Pre-shipment inspection report and test data sheet issued with every shipment
• Third party inspection such as SGS or BV accepted on request

Packaging Specification:

After-Sales Service:

• Reply within 12 working hours for any technical or quality question
• Free replacement for confirmed manufacturing defects within 12 months of shipment
• Free samples for evaluation, freight collected or prepaid on your account
• Stock held for standard sizes so repeat orders can ship in 3 working days
• Compound and hardness recommendation based on your machine weight and RPM
• Air and sea freight consolidated by our own shipping coordinator

Factory Scale:

Our 12,000 square metre plant in Guangdong runs 28 compression moulding presses from 50 to 300 ton, three injection moulding lines and an in-house tooling shop. Monthly output reaches 1,500,000 rubber parts, of which around 200,000 pieces are vibration pads and bumpers. A 96 person production team works two shifts, and our 9 engineers handle compound development, tool design and first article approval.

• 12,000 square metre production area with dedicated moulding, trimming and packing workshops
• 28 compression presses plus 3 injection lines, 50 to 300 ton
• In-house CNC tooling shop, new mould in 10 to 15 days
• Monthly capacity of 1,500,000 pieces, 200,000 vibration pads
• 96 production staff and 9 engineers, two shifts per day

FAQ:

Q: Do these pads come with a screw or threaded insert?

A: No. This is the plain cylindrical version without any stud, screw or metal insert, so it is placed under the equipment and held by weight and friction. We also mould studded and adhesive backed versions, ask us if you need a fixed design.

Q: What is the minimum order quantity?

A: 500 pieces for standard sizes, and 3,000 pieces for custom dimensions or custom compound.

Q: What is the lead time?

A: 3 working days for stock sizes and 12 to 18 working days for new production, including sampling and packing.

Q: Can you supply these in silicone or NBR compound?

A: Yes. Silicone rubber rated from -60 C to 200 C, and NBR for oil contact, are both available in the same plain cylindrical shape.

Q: How do I choose the right hardness for my machine?

A: Send us the machine weight, footprint and running speed. Heavy static loads normally use 70 Shore A, while fans and pumps with high frequency vibration work better at 50 to 60 Shore A.

Q: Which payment terms do you accept?

A: T/T with 30 percent deposit and balance against the copy of the bill of lading, L/C at sight, Western Union and PayPal for sample orders.