Sinomemb Environment Technology (beijing) Co.,
| Packaging Details | Standard export packaging |
| Membrane Material | PVDF/PES |
| Filtration Mode | Crossflow |
| Core Components | uf membrane |
| Housing | UPVC |
| Application | Electrophoretic paint concentration |
| Brand Name | SINOMEMB |
| Model Number | SNU-HO-2860 |
| Certification | NSF |
| Place of Origin | China |
View Detail Information
Explore similar products
200 Ppm PVDF Ultrafiltration Membrane 0.1 Microns Pore For Water Treatment
Eco Friendly Hollow Fiber Ultrafiltration Membrane UF 2880 UF Membrane Corrosion
High Efficiency Hollow Fiber Ultrafiltration Membrane 0.03μM Pore UF Membrane
Compact PVDF Ultrafiltration Membrane 99.99% Bacterial Remove Environmentally
Product Specification
| Packaging Details | Standard export packaging | Membrane Material | PVDF/PES |
| Filtration Mode | Crossflow | Core Components | uf membrane |
| Housing | UPVC | Application | Electrophoretic paint concentration |
| Brand Name | SINOMEMB | Model Number | SNU-HO-2860 |
| Certification | NSF | Place of Origin | China |
| High Light | Seawater ultrafiltration membrane module ，Wastewater ultrafiltration membrane module ，UPVC Housing UF Membrane Module | ||
The core SINOMEMB ® series SNU-HO-2-860 hollow fiber UF membrane element is suitable for systems with a capacity greater than 50m 3 /hr (220 gpm) . Compared with longer membrane modules, shorter membrane modules (60 inches) provide higher separation efficiency and can adapt to a wider range of influent water quality , helping customers to achieve more economical membrane system design , and can be widely used on the surface Various water treatment applications such as water, well water, seawater , industrial wastewater, and secondary and tertiary treatment of sewage .
| Membrane element model | Effective membrane area ft 2 (m 2 ) | Effective volume G( L ) | weight empty /full of water ( kg ) |
| SN U-HO-2-860 | 539(50) | 9.3(35) | 48/83 |
| Inlet size | Water outlet size | Concentrated water outlet size | Membrane Polymer |
| DN50 | DN50 | DN50 | PVDF |
| Membrane inner diameter/outer diameter (mm) | Filtration precision (μ m ) | shell material | Sealant material |
| 0.7/1.3 | 0.03 | U-PVC | epoxy resin |
| Filtration flux ( 25℃ ) L/㎡·hr | 40-120 |
| Flow range m³/hr | 2.0-6.0 |
| Maximum influent turbidity (NTU) | ≤300 |
| Maximum resistance to residual chlorine (NaCLO) (ppm) | Continuous: 200; Momentary: 2000 |
| Maximum anti-suspended solid capacity (ppm) | ≤100 |
| Maximum influent particle size ( μm ) | 300 |
| Working temperature (℃) | 1-40 |
| pH range | 2-11 |
| Maximum water production (L/m³·h) | 150 |
| Maximum inlet pressure (Mpa) | 0.625 |
| Maximum transmembrane pressure difference (Mpa) | 0.21 |
| Maximum backwash pressure (Mpa) | 0.25 |
| Maximum air flushing flow rate (Nm³/hr) | 12 |
| General backwash cycle (min) | 15-60 |
| General backwash time (sec) | 30-60 |
| General backwash flow rate (L/m³·h) | 100-360 |
| General chemical enhanced backwash cycle (day) | 1-15 |
| General chemical backwashing time (min) | 1-15 |
| General chemical cleaning cycle (day) | 30-180 |
| General chemical cleaning time (min) | 90-480 |
| General chemical cleaning chemicals | NaClO or H2O2 500ppm , NaOH (PH≤13), HCl (PH≥1 ) |
| How to run /operate | outside-in / full flow or cross flow filtration |
| Expected water production SDI | ≤2.5 |
| Expected product water turbidity NTU | ≤0.1 |
| Bacteria removal rate (log) | >6 |
| E. coli removal rate (log) | >6 |
| service life | ≥3 years under standard conditions |
| L | L1 | L2 | L3 | L4 | Diameter Φ | air intake |
| 1860mm | 1500mm | 1630mm | 1820mm | 180mm | 225mm | RP 3/8” |
| (73.2)in | (59.1)in | (64.2)in | (71.7)in | (7.1)in | (8.9)in | / |
During the operation of the UF system, it is necessary to avoid sudden changes in pressure during system start-up, shutdown, operation, cleaning, maintenance, etc., as well as exceeding the maximum withstand pressure specified in this manual, to prevent possible membrane breakage, sealing, etc. End fall off, membrane shell cracking and other serious damage consequences; this series of products have been treated with anti-corrosion and membrane wire protection before leaving the factory, and the inner membrane wire of the module is in a semi-dry state. For manual operation, the water production rate should be set to 50% of the design water production rate, and the initial water production must be discharged directly and cannot be used as product water.
The normal start-up and normal cleaning and maintenance of the UF system are the key to ensure the long-term normal use of membrane products. Before starting the system, it should be ensured that the parameters of each valve, instrument, pre-processing equipment, signal transmission equipment, power equipment, etc. meet the design specifications and requirements, so as to ensure the safe, stable and up-to-standard operation of the overall system. Please refer to the product technical manual for the debugging and testing work of the system in the early stage.
Failure to operate in strict accordance with the operating limits and guidelines set forth herein voids our limited warranty. If the UF system is out of service, please inject protective liquid inside the membrane module for anti-corrosion treatment, so as to avoid the increase of maintenance cost caused by the large number of microorganisms in the system.
Company Details
Business Type:
Manufacturer
Year Established:
2016
Total Annual:
10000000-15000000
Employee Number:
101~200
Ecer Certification：
Verified Supplier
SINOMEMB Environmental Industry Group founded in 2012, it's a high-tech enterprise group with membrane separation technology as its core. From the original water treatment membrane product development, manufacturers, gradual development to build a high-end separation membrane materials, environmenta... SINOMEMB Environmental Industry Group founded in 2012, it's a high-tech enterprise group with membrane separation technology as its core. From the original water treatment membrane product development, manufacturers, gradual development to build a high-end separation membrane materials, environmenta...
Get in touch with us
Leave a Message, we will call you back quickly!