Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 20 sets/per month |
| Delivery Time | 15 days |
| Packaging Details | plywood |
| Weights | 300N |
| Station | Single |
| Test time | 1 min |
| Using temperature | 23±2℃ |
| Material | Stainless Steel |
| Brand Name | Sinuo |
| Model Number | SN2108 |
| Certification | Calibration Certificate(cost additional ) |
| Place of Origin | China |
View Detail Information
Explore similar products
100mm Drop Tester EN 71-1 Toys 1KG Impact Strength Test Apparatus
IEC60884-1 Switch Life Tester For Insulation Parts Thermal Resistance 20N Ball
Switches Intended for Self-ballasted Lamp Loads Automatic Breaking Capacity Test
Resistive Inductive Capacitive Load Cabinet for Switches Plugs and Sockets
Product Specification
| Payment Terms | T/T | Supply Ability | 20 sets/per month |
| Delivery Time | 15 days | Packaging Details | plywood |
| Weights | 300N | Station | Single |
| Test time | 1 min | Using temperature | 23±2℃ |
| Material | Stainless Steel | Brand Name | Sinuo |
| Model Number | SN2108 | Certification | Calibration Certificate(cost additional ) |
| Place of Origin | China | ||
| High Light | IEC 60884-1 Compression Testing Apparatus ，Plugs Sockets Compression Testing Apparatus | ||
IEC 60884-1: 2022 Compression Testing Apparatus For VDE Type Plugs Sockets
Product Information For Compression Testing Apparatus:
The specimens are subjected to a compression test as shown in figure 8 of IEC 60884- 1:2013, the temperature of the pressure plate, of the base and of the specimens being (23±2) ℃ and the force applied being 300 N.
The specimens are first placed in position a), as shown in figure 8 of IEC 60884-1, and the force is applied for 1 min. They are then placed in position b), as shown in figure 8 of IEC 60884-1, and again subjected to the force for 1 min.
The specimens are removed from the test apparatus and after 15 min they shall show no damage within the meaning of this standard.
Technical Parameters For Compression Testing Apparatus:
| Number of Test Station | 1 |
| Operating method | By manual |
| Weight | 150N and 300N (consists of 2 pc of 150N weight) |
| Conforms to standard | IEC 60884-1 Clause 10.1, Clause 24.5, Fig8 |
Test method For Compression Testing Apparatus:
1. Put the apparatus in a constant temperature environment for testing, and keep the temperature of the pressure plate, base and sample at 23±2℃.
2. Rotate the handle to lift the weight, place the sample directly under the pressing block as shown in Figure a below, rotate the handle to lower the weight, make the sample bear a force of 300N, and start timing for 1min.
3. After 1min, place the sample as shown in Figure b, and bear the force of 300N again for 1min.
4. After the sample is removed from the test device for 15 minutes, the sample should not appear damaged within the standard meaning.
Notice:
1. Please do not damage the appliance shape (such as scratching, bending, etc.).
2. Prevented from dust and moisture environment, in order to avoid the oxidation to affect the dimensional accuracy.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!