Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 1 set per month |
| Delivery Time | 30 Days |
| Packaging Details | Plywood Case |
| Power Supply | AC220V, 60Hz |
| Test Station | Single |
| Test Rate | (10±2) r/min |
| Gyration Diameter | 75mm |
| Control Method | Buttons control |
| Test Times | 1-999999times |
| Load Weight | 0.4-70.3Kg |
| Test Height | 260-660mm |
| Brand Name | Sinuo |
| Model Number | SNQC1012 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
400A 8 Channels Vehicle Testing Equipment Electric Car Vehicle Connectors
Automotive Plugs Vehicle Connectors Cable Anchorage Pull Force and Torque Test
Electric Car Accessories Mechanical Strength 1～6J Energy Pendulum Impact test
IEC 62196-1 Rewireable Plugs And Vehicle Connector Drop Testing Equipment
Product Specification
| Payment Terms | T/T | Supply Ability | 1 set per month |
| Delivery Time | 30 Days | Packaging Details | Plywood Case |
| Power Supply | AC220V, 60Hz | Test Station | Single |
| Test Rate | (10±2) r/min | Gyration Diameter | 75mm |
| Control Method | Buttons control | Test Times | 1-999999times |
| Load Weight | 0.4-70.3Kg | Test Height | 260-660mm |
| Brand Name | Sinuo | Model Number | SNQC1012 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IEC 62196-1 Vehicle Terminal Test Equipment ，75mm Electric Vehicle Terminal Test Equipment | ||
IEC 62196-1 Electric Vehicle Terminal Test Equipment Mechanical Tests On Terminals
Product Information For Electric Vehicle Terminal Test Equipment:
This testing machine conforms to IEC 62196-1:2020 clause 13.3.1 fig12, table 3, etc. It is used to process mechanical tests on terminals, for judging whether the design and the structure of the new terminals are fitted with new conductors and of the minimum and the maximum cross-sectional areas is good. Besides, it is also used to check whether the clamping screw terminal can bear the stress during the process of normal usage.
The testing times can be preset before the test, and the test machine will stop automatically with completion alarm when the preset test times are reached.
Technical Parameters For Electric Vehicle Terminal Test Equipment:
| Parameter Name | Parameter Data |
| Power Supply | AC220V, 60Hz |
| Test Station | Single |
| Test Rate | (10 ± 2) r/min |
| Diameter of Gyration | 75mm |
| Test Times | 1-999999times |
| Load Weight | 0.4-70.3Kg |
| Test Height | 260-660mm adjustable |
| Diameter of Bushing | 6.5mm, 9.5mm, 13mm, 14.5mm, 15.9mm, 19.1mm, 22.2mm, 25.4mm, 28.6mm, 31.8mm, 38.1mm, 44.5mm |
| Equipment Dimensions & Weight | L 600mm* W 600mm * H1680mm, approx. 350KG |
Normal Test Steps For Electric Vehicle Terminal Test Equipment:
●Set the test cycles according to the test time, IEC 62196-1:2020 clause 13.3.1 requires the duration of the test is 15 min, equal to (150 ± 30) cycles. (If operator needs to change the test cycles, operator must press the RST button on the counter to eliminate the previously set test cycles)
●Press the "START" button, the equipment starts to test, the turntable rotates at a speed of (10 ± 2) r/min, when the test cycles reach the set value, the test automatically stops with an audible prompt (operator can press the “STOP” button during test to stop test).
●Press the RST button on the counter to cancel the sound prompt. After the test, cut off the power supply.
Weight Distribution Table For Electric Vehicle Terminal Test Equipment:
| Weight with hook | 0.4kg*1, 0.7 kg*1, 0.9 kg*1, 1.4 kg*1, 2 kg*1, 4.5 kg*1, 9.5 kg*1, 19.5 kg*1, 24.2 kg*1 |
| Weight with hole | 0.7 kg*4, 0.8 kg*2, 0.9 kg*3, 3.2kg*1, 4.5 kg*1, 4.6 kg*1, 25 kg*1 |
| How to combinate the weight: | |
| 0.4kg | 0.4kg+small wire clamp |
| 0.7kg | 0.7kg+small wire clamp |
| 0.9kg | 0.9kg+small wire clamp |
| 1.4kg | 1.4kg+small wire clamp |
| 2.0kg | 2.0kg+small wire clamp |
| 2.9kg | 2+0.9+small wire clamp |
| 4.5kg | 4.5kg+small wire clamp |
| 6.8kg | 4.5 kg +0.9 kg +0.7 kg*2+small wire clamp |
| 9.5kg | 9.5 kg +small wire clamp |
| 10.4kg | 9.5 kg +0.9 kg +small wire clamp |
| 14kg | 9.5 kg +4.5 kg +small wire clamp |
| 15kg | 9.5 kg +0.9 kg +0.7 kg *2+3.2 kg +small wire clamp |
| 16.8kg | 9.5 kg +4.5 kg +0.7 kg*4+small wire clamp |
| 20kg | 9.5 kg +4.6 kg +4.5 kg +0.7 kg*2+small wire clamp |
| 22.7kg | 9.5 kg +4.5 kg +4.6 kg +0.9 kg*3+0.7 kg*2+small wire clamp |
| 50kg | 24.2kg+25kg+0.8kg+large wire clamp |
| 70.3kg | 19.5kg+24.2kg+25kg+0.8kg+0.8kg+large wire clamp |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!