Payment Terms | T/T |
Supply Ability | 10 Sets Per Month |
Delivery Time | 30 Days |
Packaging Details | Plywood Case |
Working size(mm) | L1000*W1000*H1000 |
Outer size (mm) | L1610*W1250*H1950 |
Test sand (or talc) dosage | 2kg/m³ |
Vacuum pump | 0~30Kpa |
Air pressure | 0.5~1.0Mpa |
Timing range | 0~99 hours 59 min |
Brand Name | Sinuo |
Model Number | SN441-1000L |
Certification | Calibration Certificate (Cost Additional) |
Place of Origin | China |
View Detail Information
Explore similar products
Hand - Held Protection Against Water Jets IPX5 IPX6 6.3 Mm Or 12.5 Mm
IEC 60529 Wall Mounted IPX1 And IPX2 Vertical Drip Box Testing Equipment
IEC 60529 IPX8 Water Ingress Testing Equipment Continuous Immersion Stainless
IEC 60529 Hand Held IPX3 And IPX4 Spray Nozzle With Digital Flowmeter
Product Specification
Payment Terms | T/T | Supply Ability | 10 Sets Per Month |
Delivery Time | 30 Days | Packaging Details | Plywood Case |
Working size(mm) | L1000*W1000*H1000 | Outer size (mm) | L1610*W1250*H1950 |
Test sand (or talc) dosage | 2kg/m³ | Vacuum pump | 0~30Kpa |
Air pressure | 0.5~1.0Mpa | Timing range | 0~99 hours 59 min |
Brand Name | Sinuo | Model Number | SN441-1000L |
Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
High Light | IEC60529 Dust Test Chamber ,Stainless Steel Dust Test Chamber |
IEC60529 Stainless Steel High Quality Sand And Dust Test Chamber
Product information:
The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of the electrical and electronic products, car and motorcycles spare parts and seals. In order to detect the use, storage, transport performance of the electrical and electronic products, car and motorcycles spare parts and seals under the sand and dust environment.
The test equipment uses intelligent and humanized PLC control system, the inner of the test equipment is made of high quality SUS304 stainless steel, the enclosure is A3 plate electrostatic spraying. And it also has large observation window and manual wiper device. The security protection is good.
The sand and dust test chamber is designed and manufactured according to IEC60529 Fig 2 IP5X and IP6X, IEC60598-1-2008, IEC60335-1 Clause 22.1 and etc.
Technical Parameters:
|
Product main configuration:
Device Name | Dust and Sand Test Chamber | ||
Main configuration | Cabinet | Enclosure material | A3 plate electrostatic spraying |
Inner material | SUS304B Stainless steel | ||
Lead hole | The sample can be external power supply through this hole | ||
Observation window | large observation window in the middle of the door | ||
Electrical control system | Controller | PLC Control: A. blowing dust time (stop, blowing) can be adjusted B. Cycle: arbitrary adjustable C. Preset test time: 0.1H-9999.9H arbitrary adjustable D. Power: On-off- On E. There are accumulating function and power-off protection function
| |
Vacuum system | Equipped with a vacuum pump, pressure gauge, air filter, pressure regulator, connecting pipe | ||
Security Protection Device | Power overload, short-circuit protection | ||
Ground Protection | |||
Voltage Protection | |||
Motor phase loss protection | |||
Alarm beep prompt | |||
Power Supply | Three phase 380V, 50Hz,3KW |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification:
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!