Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, T/T |
| Supply Ability | 20 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Plywood |
| Test medium | Dry air |
| Display accuracy | 0.1 Bar |
| Test pressure | 1.0-10.0Bar, booster pump drive |
| Test station | Single station |
| Applied clause | Cl 101.6 |
| Applied standard | IEC 62196-3-1 |
| Brand Name | Sinuo |
| Model Number | SNQC1016 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
75g Test Punch With 60° Conical Tungsten Carbide Tip IEC60335-2-24 Clause 22.116
IEC 60335-2-23 Skin or Hair Care Appliance Swivel Connection 50 r/min Rotation
IEC 60335-1 Oxygen Bomb Aging Test Chamber 4000cm3 Stainless Steel Air Bomb Tank
SS Electrical Appliance Tester IEC 60335-1 Clause 20.2 Similar To Test Probe B
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 20 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Plywood |
| Test medium | Dry air | Display accuracy | 0.1 Bar |
| Test pressure | 1.0-10.0Bar, booster pump drive | Test station | Single station |
| Applied clause | Cl 101.6 | Applied standard | IEC 62196-3-1 |
| Brand Name | Sinuo | Model Number | SNQC1016 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Computer Controlled Overvoltage Test System ，IEC 62196 Overvoltage Test System | ||
IEC 62196 Computer Controlled Overvoltage Test System For Electric Vehicle Accessories
Product Information:
This overpressure test system meets the test requirements of IEC 62196-3-1 Cl 101.6. It is used for pressure leakage testing of liquid coolants up to 10L volume for sealing requirements.
The system's booster pump delivers high pressure at different pressures of the sample to verify the sample's pressure resistance. The system consists of an electrical control system, a pressure control system, and a water tank, and the workpieces are installed and connected manually.
Technical Parameters:
| Power supply | AC 220V, 60Hz, 0.3KW |
| Test station | Single station |
| Electrical control method | Computer intelligent control and operation |
| Test pressure | 1.0-10.0Bar, booster pump drive |
| Pressure control accuracy | +1% of the upper limit of the test pressure value, -1% of the lower limit |
| Display accuracy | 0.1 Bar |
| Test medium | Dry air |
| Pressure control method | Computer control |
| Boost rate | Adjustable, non-uniform linear |
| Pressure hold time | 0-9999s arbitrarily set, with seconds as the time unit, computer display |
| Test process | Boost-hold-relief |
| Drive air pressure | 0.2-0.8MPa |
| Volume size | Less than 10L |
| Water tank dimensions | WDH=500×500×1000mm |
| Standard output Interface | ZG1/4 female thread |
| Pressure curve display | Real-time display, data collected by software |
| Test data storage | Can save reports in excel form |
| Computer | Intel i5 4 G RAM (or higher) 512 G solid state drive, Windows 7 operating system and OFFICE processing software with RS232 communication interface |
| Safety protection | |
| Power | Leakage protection, overload and short circuit protection |
| Motor | Overload, short circuit protection |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!