Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, T/T, Western Union, MoneyGram |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Plywood |
| IP Grade | IPX3 IPX4 |
| Oscillating Tube Radius | R200~1600mm optional |
| Oscillating Tube Material | Stainless steel |
| Needle Pinhole Aperture | Φ0.4mm |
| Water Flow | 1-10L/min adjustable |
| Control Method | PLC & touch screen |
| Brand Name | Sinuo |
| Model Number | SN444 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Hand - Held Protection Against Water Jets IPX5 IPX6 6.3 Mm Or 12.5 Mm
IEC 60529 Wall Mounted IPX1 And IPX2 Vertical Drip Box Testing Equipment
IEC 60529 IPX8 Water Ingress Testing Equipment Continuous Immersion Stainless
IEC 60529 Hand Held IPX3 And IPX4 Spray Nozzle With Digital Flowmeter
Product Specification
| Payment Terms | L/C, T/T, Western Union, MoneyGram | Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Plywood |
| IP Grade | IPX3 IPX4 | Oscillating Tube Radius | R200~1600mm optional |
| Oscillating Tube Material | Stainless steel | Needle Pinhole Aperture | Φ0.4mm |
| Water Flow | 1-10L/min adjustable | Control Method | PLC & touch screen |
| Brand Name | Sinuo | Model Number | SN444 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | rain test chamber ，iec test equipment | ||
IPX3 IPX4 Oscillating Tube Test System for Protection Against Spraying and Splashing Water
Overview:
This open type IPX3 and IPX4 oscillating tubes test system is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water spraying and splashing at degree IPX3 and IPX4.
Standards compliant:
Structure:
The test equipment consists of an oscillating mechanism, an electrical control cabinet and a turntable. One end of the oscillating mechanism is mounted on the wall, and the other end of the oscillating mechanism is fixed on the floor support, the tube is caused to oscillate by motor driving. The turntable has a rotation speed of 1r/min, to make the enclosure of the specimen to be splashed in all directions. The test equipment is equipped with a water filter cleaning device to prevent pinhole blockage. This whole system adopts open structure.
Technical parameters:
| Control & Operation | PLC and touch screen intelligent control system |
| Oscillating Tube Radius | R200, R400, R600, R800, R1000, R1200, R1400, R1600mm are optional, made of stainless steel
|
| Needle Pinhole Aperture | Φ0.4mm |
| Spray Holes Distribution | IPX3:over an arc of 60° either side of the center point (120°) IPX4:over the whole 180° of the semicircle Hole spacing: 50mm |
| IPX3/4 Switching | Switching by changing a certain number of blind hole needles or through-hole needles |
| Oscillating Angle | IPX3:120°(±60°)； IPX4:350°(±175°) |
| Oscillating Speed | IPX3:4s /cycle(2×120°); IPX4:12s /cycle(2×350°); |
| Water Flow | 1-10L/min adjustable |
| Test Time | 0.01S～99.9 min, can be preset |
| Turntable | Diameter:Φ600mm, rotation speed: 1r/min, can pause at 4 angles, lifting height: 350-1000mm, load capacity: ≤50kg |
| Pressure Gauge | 0~0.25MPa |
| Water Storage System | The control box and the water storage tank are integrated, the water storage tank is equipped with a water level float valve to automatically control the water inlet, and has high and low water level alarm detection, to effectively prevent the pump from being damaged due to dry water. |
| Optional | The handheld spray nozzle as per IEC 60529m figure 5 is optional |
| Safety Protection | Phase sequence protection, leakage protection, water shortage protection, abnormal protection |
| Equipment Dimensions | According to the sizes of the oscillating tubes selected |
How to change the different oscillating tubes?
The connection parts of the oscillating tubes adopt flange structure, which is easy for disassembly and installation, and the support structure can be movable to achieve different distances, that makes the overall system can be compatible with different sizes oscillating tubes.
Flange joint
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!