Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 20 Sets Per Month |
| Delivery Time | 1 Month |
| Packaging Details | Plywood Case |
| Crushing Force | 5000N or 11000N |
| Roll Over Speed | (8±2)km/h |
| Drive Over Tire | P225 / 75R15 |
| Control Method | PLC control |
| Tire pressure | (220±10) kPa |
| Drive over stroke | 0~2.0m |
| Test station | Single station |
| Placement mode | Floor standing |
| Brand Name | Sinuo |
| Model Number | SN11010 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
400A 8 Channels Vehicle Testing Equipment Electric Car Vehicle Connectors
Automotive Plugs Vehicle Connectors Cable Anchorage Pull Force and Torque Test
Electric Car Accessories Mechanical Strength 1～6J Energy Pendulum Impact test
IEC 62196-1 Rewireable Plugs And Vehicle Connector Drop Testing Equipment
Product Specification
| Payment Terms | T/T | Supply Ability | 20 Sets Per Month |
| Delivery Time | 1 Month | Packaging Details | Plywood Case |
| Crushing Force | 5000N or 11000N | Roll Over Speed | (8±2)km/h |
| Drive Over Tire | P225 / 75R15 | Control Method | PLC control |
| Tire pressure | (220±10) kPa | Drive over stroke | 0~2.0m |
| Test station | Single station | Placement mode | Floor standing |
| Brand Name | Sinuo | Model Number | SN11010 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | automotive test equipment ，automobile testing equipments | ||
IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector
Product information:
The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc.
Test principle:
Accessories wired with the minimum size cable of a type recommended by the manufacturer shall be placed on a concrete floor in any normal position of rest. A crushing force of (5000±250) N or (11000±550) N shall be applied by a conventional automotive tire, P225/75R15 or an equivalent tire suitable for the load, mounted on a steel rim and inflated to a pressure of (2.2±0.1) bar. The wheel is to be rolled over the vehicle connector or plug at a speed of (8±2) km/h. The accessory is to be oriented in a natural resting position before applying the force in a different direction for each sample. The accessory under test shall be held or blocked in a fixed position so that it does not move substantially during the application of the applied force. In no case is the force to be applied to the projecting pins.
Applied standard & clauses:
IEC 62196-1: 2022 clause 33.
IEC 62752:2016 clause 9.34
Technical Advantages:
The whole equipment adopts cold-rolled steel plate protection chassis structure design, the surface of the chassis body is treated with Teflon paint, the bottom plate of the chassis is covered with simulated concrete floor, and the rolling mechanism can simulate the automotive tire to slide up and down freely after rolling over the specimen, vehicle connector / plug and its function box bears the same crushing force and is equipped with limited protection. The other set of driving device drives the rolling mechanism to realize the front and rear rolling action. The main components are made of stainless steel and aluminum. (Make sure the tire is crushed under normal rolling conditions).
Technical Parameters:
| Test station | Single station |
| Equipment placement mode | Floor standing |
| PLC control system |
|
| Operation mode | Manual or program-controlled operation, can be selected |
| Drive over power system | Motor plus worm gear acceleration and deceleration |
| Drive over stroke | 0~2.0m |
| Load Carrying | A. Crushing force (5000±250) N B. Crushing force (11000±550) N |
| Force sensor | Will be provided with an external precision force sensor to measure the total force from tyre, load, upper and lower sliding frame, power system and counter weight before testing. |
| Drive over speed | (8±2) km/h, speed adjustable |
| Drive over method | It is driven by a linear motor module to simulate the forward and backward reciprocating motion of rolling tires. This simulates the damage caused by accidental crushing of the plug of the charging pile when the car is moving forward or reversing in reality. |
| Drive over force adjustment | Using weights, the force range is adjustable from 5000N-11000N, and the weights are loaded and unloaded by cantilever crane.
|
| Drive over tires | 1. Equipped with one P225/75 R15 tire and one matching wheel hub, a set of tire inflation devices (inflation interface and air pressure gauge, for 5000N test)
3. The wheel load shall be mounted on a steel rim |
| Drive over tire pressure | (220±10) kPa |
| Load bearing base plate | Base plate with cement/concrete floor, can be equipped with sample fixing clamp.
|
| Deceleration method | Our company has designed a braking mechanism to prevent rigid collisions. |
| Safety protection |
The whole machine is equipped with a protective fence to prevent the wheels from accidentally deflecting and prevent mechanical injuries to personnel. With leakage protection switch. With motor overload protection. |
| Usage environment | Power supply: AC380V±10 %, 50Hz. Overall dimensions: approximately W4700*D1300*H3000mm; Weight: approximately 2400kg |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!