Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, T/T, Western Union, MoneyGram |
| Supply Ability | 50 sets per month |
| Delivery Time | 7 Days |
| Packaging Details | Carton Box |
| Control mode | Mechanical |
| Tensile weight | 50N |
| Tensile test time | 1 min |
| Tensile control mode | Manual control |
| Standard | IEC60898-1 |
| Size | WDH=About 600×400×1000mm |
| Brand Name | Sinuo |
| Model Number | SN2157-2 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60335-2-24 φ75mm Sphere Test Probe with Nylon Handle
IEC60884-1 Switch Life Tester For Insulation Parts Thermal Resistance 20N Ball
Switches Intended for Self-ballasted Lamp Loads Automatic Breaking Capacity Test
Resistive Inductive Capacitive Load Cabinet for Switches Plugs and Sockets
Product Specification
| Payment Terms | L/C, T/T, Western Union, MoneyGram | Supply Ability | 50 sets per month |
| Delivery Time | 7 Days | Packaging Details | Carton Box |
| Control mode | Mechanical | Tensile weight | 50N |
| Tensile test time | 1 min | Tensile control mode | Manual control |
| Standard | IEC60898-1 | Size | WDH=About 600×400×1000mm |
| Brand Name | Sinuo | Model Number | SN2157-2 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | 50N Mechanical Stress Resistant Equipment ，Clause 9.13.2.3 Mechanical Stress Resistant Equipment ，50N Electrical Appliance Testing Equipment | ||
IEC60898-1 50N Mechanical Stress Resistant Equipment - Standing Structure
Product overview
The mechanical stress resistant equipment is designed according to the relevant requirements of IEC60898-1, IEC61009-1, IEC60934:2007.
It is suitable for switch sockets, surface-mounted installation boxes, miniature circuit breakers, contactors, plastic cases and other products to verify that the circuit breaker is in the correct position.
Impact resistance of exposed parts that may be subjected to mechanical impact during normal use.
Equipment principle
Designed in accordance with the requirements of IEC60898-1, IEC61009-1, IEC60934:2007, use weights and soft ropes to pair the test product installed on the guide rail (should be installed on the mounting rail rigidly fixed on the vertical rigid wall according to normal conditions of use, but not connected Cable, without any cover or cover) apply a 50N vertical downward force on the front side (do not apply violently) for 1 min, and then apply a 50N vertical upward force for 1 min. Manually pick and place the weight to control the force time.
Main technical parameter:
| Control mode | Mechanical |
| Tensile weight | 50N |
| Tensile test time | 1min |
| Tensile control mode | Manual control |
| Size | WDH=About 600×400×1000mm |
Tensile test process
Install the samples separately as shown in the left and right diagrams below. The samples are not connected to cables, and there is no cover or cover plate. First apply a 50N vertical downward force on the front of the test product according to the left picture, but do not apply it violently for 1 min, then apply a 50N vertical upward force as shown in the right picture for 1 min, and judge whether the test product is qualified according to the standard.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!